Lab.gruppen C Series C 10 4X User manual

C 10:4X
Current Draw and Thermal Dissipation
C Series: Dedicated Installation Amplifiers
Item no. CDTD_C104X
The following tables contain information on measured current consumption as well as calculated heat dissipation during normal operation
(1/8 rated power); and during extreme heavy duty operation (1/4 rated power).
TEMP
VHF
CPL
VPL | CLIP
SIG | HI-IMP
TEMP
VHF
CPL
VPL | CLIP
SIG | HI-IMP
CH|ACH|BCH|CCH|D
MUTE
F A U L T
MUTE
F A U L T
POWER
BRIDGE BRIDGE BRIDGE BRIDGE
P A L
ON/OFF
C10:4X
REMOTE
C SERIES
LABEL AREA
Lab.gruppen ab •Sweden
internationaL contact • [email protected] | uS contact • [email protected]
www.labgruppen.com
120 VAC 230 VAC In Out Dissipated BTU/hr kCal/hr
6 0 6 20 5
91 0 91 312 79
16 !/ Ch. 250 x4
32 !/ Bridged 500 x2
250 x4
500 x2
8 !/ Ch.
16 !/ Bridged
4 !/ Ch. 250 x4
8 !/ Bridged 500 x2
2 !/ Ch. 125 x4
4 !/ Bridged 250 x2
16 !/ Ch. 250 x4
32 !/ Bridged 500 x2
8 !/ Ch. 250 x4
16 !/ Bridged 500 x2
4 !/ Ch. 250 x4
8 !/ Bridged 500 x2
2 !/ Ch. 125 x4
4 !/ Bridged 250 x2
Pink noise
(1/4 rated
power)
Pink noise
(1/8 rated
power)
86
3,3
1,7
384
250
134
456
115
2,0
1,0
225
341
432
109
C 10:4X
Level
Load
Rated
power
Line Current *2)
Watt *1)
Thermal Dissipation
314
79
230
Standby w. remote Power Off via NomadLink
Power On, Idling
Amp
Watt
252
2,1
127
125
125
92
100
125
125
73
359
90
249
63
105
1,3
0,7
136
63
3,5
1,8
364
250
208
710
179
388
98
250
123
421
106
250
114
94
321
81
2,2
1,1
219
125
128
509
149
125
274
1,4
2,7
2,5
1,3
1,1
217
2,3
1,2
237
942
276
250
526
2,6
4,9
4,3
3,6
1,9
373
2,2
458
x2
500
x2
250
x4
*1) The amplifier's PSU operates as a non-resistive load, so the calculation "Volts x Amps = Watts" would not be correct. Instead, measured and
specified here is what is known as the "Active Power" in the amplifier providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw figures measured at 230 V. 115 V figures are 230 V figures multiplied by two.
70 V / Ch.
100 V / Ch.
70 V / Ch.
100 V / Ch.
x4
250
500