Printed 07-2001 -2- Form No. M1-0002
TW31CS AND TW38CS TRAILING SWEEPERS
TABLE OF CONTENTS
ASSEMBLY…………………………………………………2-11
PINION GEAR………………………………………………..13
BRUSH REPLACEMENT……………………………………14
EXPLODED VIEW……………………………………………12
OPERATION…………………………………………………13
LUBRICATION AND PINION GEAR………………………13
PARTS LIST………………………………………………….11
PREASSEMBLY
Unpack carton and lay out all parts. Carton should contain the following items. Numbers in parenthesis refer to the
corresponding numbers on exploded view on page 14 of this manual.
3 Hitch Brackets (27& 28)
2 Hamper Support Straps (46)
1 Adjustment Knob
2 Top Hamper Tubes (45)
4 Hamper Cross Tubes (47)
2 Hamper Corner Tubes (32)
1 Loose Parts Package
2 Hitch Tubes (25)
1 Height Adjustment Strap (14)
2 Back Hamper Tubes (44)
2 Bottom Hamper Tubes (43)
1 Hamper Assembly (49)
1 Dump Handle (17)
TOOLS REQUIRED FOR ASSEMBLY:
1 1/2" Wrench
1 3/8” Drive Ratchet
1 9/16” Socket
1 9/16” Wrench
1 1/2" Socket
1 Pair of Pliers
GENERAL SAFETY PRECAUTIONS:
- Never perform any work on the sweeper when attached to tractor and engine is running.
- Keep hands, feet, hair, and loose clothing away from moving parts when sweeper is in operation.
- Clear area of large objects such as toys, tools, large rocks or tree branches.
- Do not use sweeper as a trailer to carry tools, children, boxes or other equipment.
- Do not operate sweeper too close to fences, trees, buildings, open fires, or other obstructions.
- Maintain a safe operating speed that will permit satisfactory sweeping action. Reduce speed on rough terrain,
hillsides, and near ditches. Be alert for holes or other hidden hazards.
- Do not allow children or inexperienced persons to operate the sweeper.
- Never operate the sweeper near people. Debris can be thrown long distances.
