Perma child safety Extra Wide Barrier User manual

IMPORTANT! READ AND FOLLOW
THESE INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE.
This product complies with safety standard EN12227:2010
when in playpen formation.
Fits opening size 73cm to 194cm
AFTER SALES SUPPORT
[e-mail]
1300 467 068
Product Code: 2748
Extra Wide
Barrier

Extra Wide Barrier User Guide
2
Parts List
A. 2x Barrier panels (Panel A)
B. 1x Gate (Panel B)
C. 2x Top underside wall bracket
D. 2x Top topside wall bracket
E. 2x Lower wall bracket
F. 2x Top cap
G. 2x Bottom cap
H. 8x Screws
I. 4x Corner tubes
E
F
G
I
H
If any parts are missing do not attempt to use your Extra Wide Barrier.
Please call after sales support to obtain replacements.
Only use parts supplied by manufacturer with your Extra Wide Barrier.
D
A
B
C

Extra Wide Barrier User Guide
3
Safety Information
WARNING
WHEN USED AS A SAFETY BARRIER:
WARNING - Incorrect fitting or positioning of this safety barrier can be dangerous.
WARNING - Do not use the safety barrier if any components are damaged or
missing.
WARNING - Never install this product on glass doors or windows.
WARNING - Stop using the product if the child is able to climb or dislodge barrier.
WARNING - A maximum of 3 panels including gate can be used as a safety
barrier.
WARNING - Danger to older children if climbing over the barrier.
WARNING - Regularly check that the barrier is properly fixed and secure.
WARNING - Any additional or replacement parts should only be obtained from
after sales support call 1300 467 068.
WARNING - This safety gate is suitable for openings from 73cm to 194cm.
WHEN USED AS A PLAYPEN:
WARNING - This safety barrier is intended for use with children 6 to 24 months or
small to medium pets.
WARNING - Do not use the playpen without the PERMA Products play mat base.
WARNING - Do not place the playpen close to an open fire or other heat source.
WARNING - Do not leave anything in the playpen which may provide a foothold or
create a danger of suffocation or strangulation.
WARNING - Check regularly that all assembly fittings are tightened properly.
WARNING - Ensure that the playpen is fully erected and all the locking
mechanisms engaged before placing your child in this playpen.
WARNING - Do not use the playpen if any part is broken, torn or missing and use
only spare parts approved by manufacturer, accessories which are
not approved by manufacturer shall not be used.
WARNING - Check regularly that all assembly fittings are tightened properly.
CLEANING:
WARNING - Clean using a damp cloth or sponge and a mild detergent.
Towel or air dry.

Extra Wide Barrier User Guide
4
Warning: Adult assembly required. Keep small parts out of reach of children and safely
dispose of packaging.
1. Remover Extra Wide Barrier from packaging and place upright on oor.
2. Unfold the Extra Wide Barrier and place in desired location.
Select the appropriate fixing method from the following list.
This barrier must only be fixed to a solid and secure surface.
Wood Fixing
Drill 2mm pilot holes and use the wood screws provided screwing directly into the wood.
Hard Wall Fixing
Drill 6mm(1/4”) holes and insert the wall plugs provided before screwing into these.
Plaster Board Walls
Plaster board walls require expandable wall plugs( not supplied), these are available at
all DIY retailers.
General Assembly
Adding and Removing Panels
To Remove Unwanted Panels
Turn base knob anti-clockwise to the unlocked position, pull up on the corner tube and slide the
bottom of the tube out from the base. With the corner tube removed you can lift and remove the
unwanted panel.
1
2
3

Extra Wide Barrier User Guide
5
Adding Extra Panels
Note: Two of the same panels cannot be joined together, Panel A will only connect to
Panel B.
Align Panel A and Panel B, place the corner tube into the top hole first, pull the corner tube up so
you can locate the bottom of the tube into the bottom hole
Turn the base knob in a clockwise direction to lock panels.
2
3
1

Extra Wide Barrier User Guide
6
Panel A Wall Assembly
NOTE: Place Lower Wall Bracket (E) over Corner Tube (I) before assembly.
Expanded:
Assembled:
I
G
G
C
C
E
E
A
1x Bottom Cap
1x Lower Wall Bracket
1x Top Underside Wall Bracket
Parts Required:

Extra Wide Barrier User Guide
7
1
1. Mark screw positions with pencil.
2. Disassemble and screw in Top Underside Wall Bracket (C) and Lower Wall Bracket (E).
3. Reassemble Panel A, Corner Tube (I) and Bottom Cap (G) into Top Underside Wall Bracket (C)
and Lower Wall Bracket (E).
3
2
C
E
G
I
G
C
E
A

Extra Wide Barrier User Guide
8
Panel B Wall Assembly
NOTE: Place Lower Wall Bracket (D) over Corner Tube (H) before assembly.
I
B
F
E
D
Expanded:
Assembled:
1x Lower Wall Bracket
1x Top Topside Wall Bracket
Parts Required:
1x Top Cap
F
E
D

Extra Wide Barrier User Guide
9
1 2
1. Mark screw positions with pencil.
2. Disassemble and screw in Top Topside Wall Bracket (D) and Lower Wall Bracket (E).
3
3. Reassemble Panel A, Corner Tube (I) and Top Cap (F) into Top Topside Wall Bracket (D) and
Lower Wall Bracket (E).
E
D
I
B
F
E
D
F

Extra Wide Barrier User Guide
10
Operation
Using one hand place thumb on the button and grip gate with fingers. Slide button and lift gate,
then open gate in either direction, when released gate will swing closed automatically.
Always check gate is properly closed.
Up to 3 panels including the gate may be used in open configurations providing the 2 end
panels are securely fixed to a wall with the fixings provided.
2
1

Extra Wide Barrier User Guide
11

Extra Wide Barrier User Guide
12
Warranty Certicate
Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also
includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults,
we will provide you with a warranty against defects as follows:
Warranty
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Proof of Purchase
This warranty is valid for the original purchase and is not transferable. Please keep your purchase docket,
tax invoice or receipt as the best proof of purchase, and as proof of date on which the purchase was made.
Extent of Warranty
This warranty is limited to defects in workmanship or parts. All defective products or parts will be repaired
or replaced. This warranty does not cover consumable items.
Normal Wear and Tear
This warranty does not cover normal wear and tear to the products or parts.
Exclusions
This warranty does not cover:
• Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable
care, unauthorised modification, loss of parts, tampering or attempted repair by a person not authorised
by the distributor.
• Any product that has not been installed, operated or maintained in accordance with the manufacturer’s
operating instructions provided with the product.
• Any product that has been used for purposes other than domestic use.
To Make a Claim
If a defect in the goods appears within 12 months, you are entitled to claim a warranty, please contact or
send all warranty claims to:
PERMA Products
[email protected]
1300 467 068
When making a return, please ensure the product is properly packaged so as to ensure that no damage
occurs to the product during transit.
Please provide the original or a copy of the proof of purchase. Also please make sure you have included an
explanation of the problem.