ㆍWhen exchanging or repairing electric parts, pull the plug out before
exchanging and repairing.
ㆍWhen exchanging electric parts, use a rating part.
- Be sure to check marks such as MODEL name, rating voltage,
rating currents, movement temperature etc.
ㆍDuring repairing, make sure wirings such as HARNESS, WIRE JOINT are
sturdy so that it is free of danger due to disclosure of core wire.
- Don’t let it derail when certain strength is put on.
ㆍWhen repairing, take out the dust or foreign body (Housing part, wiring part,
contact point part).
- It prevents danger of fire such as TRACKING, SHORT.
ㆍCheck whether water has gone into the electric parts.
- When there are traces of water, exchange the parts or enact the TRACKING
prevention device.
ㆍAfter repairing, check the assembly status of the parts.
- Keep the status as it was before the repairing. .
ㆍAfter checking the usage environment of the product and if the installation is
unstable, change the usage location.
- For installations in places with moisture, water and for heat devices, prevent
placing products near igniting materials etc.
ㆍWhen earthing is needed, earth it.
- For cases when electric leakage is concerned due to moisture or water,
be sure to earth it.
ㆍFor products that consumes power such as electric products, make sure
numerous plugs are not used in a single outlet.
