LBL Lighting Nikko User manual

1
Installation Instructions for
Nikko
1.0
147_, 159_
980NIKKO
Outdoor
Install the Fixture
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and DISCONNECT POWER TO
THE ELECTRICAL BOX.
GENERAL PRODUCT INFORMATION:
This product is suitable for wet locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
Feed the power line wires through the crossbar nipple.
1
NIPPLE
POWER LINE
WIRE
1
1B
Attach the crossbar to the electrical box using two #8-32
screws provided.
2
NIPPLE
2
2
#8-32 SCREW
CROSSBAR
3

2
1E
7Make sure the fixture base is level, and secure it to the nipple
with a lock washer and nut.
7
1C
Remove all the screws from the front of the fixture.
Lift the cover off of the fixture.
3
4
1F
8Connect the hot power line wire to the black socket wire with
a wire nut.
Connect the neutral power line wire to the white socket wire
with a wire nut.
Connect the fixture to a suitable ground according to local
electrical codes.
Reattach the reflector to the fixture base.
9
10
WASHERNUT NIPPLE
SCREWCOVER
9
8
1D
5Remove the screws on the reflector.
Lift the reflector out of the fixture base.
6
SCREW
FIXTURE BASE
11
3
3
3
3
REFLECTOR
5
5

3
2C
Replace the cover and reattach the screws to secure the cover
to the fixture.
4
2B
3If installing in a wet location, caulk around the base with
waterproof construction sealant.
2A
Screw the lamp base into the socket.
Before continuing, turn on power to the fixture to verify all
connections are good.
CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
1
2
3
Install the Lamp and Cover
Use
type B10 torpedo medium base lamp.
MAX 60 Watt
4
4
4
4
1

4
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2008 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company