LC-POWER LC-M34-UWQHD-100-C User manual

LC-M34-UWQHD-100-C

Eng-1
ECO Modes and Gameplus Switching

3. Box Contents
Monitor x 1 Stand Stem x 1 Stand Base x 1
Screws x 4
(For Wall Moun
Screws x 5
(For Stand Installaon) DP Cable x 1
Power Cable x 1
(AC 100-240V~ 50/60Hz)
Extra screws may be included as backup.
User Manual x 1
Eng-2
LC-M34-UWQHD-100-C

4. Product Overview
4.1 –Monitor Bu ons
7
8 DP Connector : Insert one end of the DP cable into the computer’s DP output
and connect the other end to the monitor’s DP port.
9 HDMI Connector : Insert one end of the HDMI cable into the computer’s HDMI
output and connect the other end to the monitor’s HDMI port.
1 M Menu Button: Press to display the OSD menu or enter sub-menus.
2 Down Button: Press to move down in the menus.
3 Up Button: Press to move up in the menus.
4 E Exit Button:Press to exit.
5 Power Button: Press to turn the monitor on/off.
6 LED Indicator: Changes colors to indicate status.
4.2 – Monitor Ports
10
DVI Connector : Insert one end of the DVI cable into the computer’s DVI
output and connect the other end to the monitor’s DVI port.
Audio Output
: Insert one end of the Audio cable into the computer’s Audio output
to receive the Audio signals from your monitor.
Eng-3
7 8 9 10

5. Stand Installa on
Eng-4
0
0

6. Wall Moun
Eng-5

7. Connec vity Op ons
7.2
7.3
Eng-6

7.4
7.5
7.6
Eng-7

8. Basic Opera
Insert one end of the DP cable into your PC’s graphics card. A HDMI cable may also
be used. A HDMI cables is not included.
2. Connect the other end of the cable to the corresponding connector on your monitor.
3. Connect the power cable to your monitor then connect the other end to your power
source. It is recommended that you use a surge protector with adequate voltage if a wall
outlet cannot be reached directly .
4. Press the power buon to turn on the monitor.
1.
FreeSync
The feature itself is off by default. In order to use this feature, please note you must have
hardware with FreeSync capability, an DP cable, and the latest graphic drivers. To use
this feature, connect your computer and monitor with an DP cable. A er connec ng,
you may receive a prompt to enable the feature on your computer. If you do not receive the
prompt, you may need to enable the func on in your graphics card menu. See your graphics
card manufacturer’s documenta on for instruc ons on how to turn on and/or enable FreeSync.
Eng-8

9. Indicator Light
Solid blue light indicates power is on and the monitor is operang normally. Flashing blue light
indicates no video source ,no horizontal or vercal signal has been detectde or voltage is low.
Please ensure your computer is on and all video cables are fully inserted and/or connected.
10. OSD
The On-Screen Display (OSD) Menu may be used to adjust your monitor’s se ngs
and appears on screen a er turning on the monitor and pressing the Mb on.
When using the monitor for the firs me, se ngs will automa cally adjust to
omal se ngs according to your computer’s configura on and parts etc.
1. Press any one of the b ons ( M, , , E, ) to ac vate the naviga on window.
2. Press Mto enter the OSD menu.
3. Press or to browse func ons.
• Highlight the desired func on, then press Mto enter the sub-menu.
• Press or to browse sub-menus, then press Mto highlight the desired
func on.
• Press or to highlight an o on, then press Mto confirm the se ngs and exit
the current screen.
4. Press Eto exit the current screen.
Eng-9
3440x1440@60Hz
3440 x1440@60Hz
OSD

10.1 – OSD Menu Func ons
Eng-10
Blacklevel blacklevel
1.8
2.6
1:1,

Eng-11
OSD
DP Version DP1.2, DP1.1
FreeSync
(Adapve Sync)
Turn the FreeSync funcon on/off

11. ECO Modes and Gameplus Switching
Eng-12
3.

100Hz
815*437*249mm
815*364*97mm
8.1kg
Power
12. Technical Specifica
DVI*1, HDMI*1, DP*1
OD 4ms
LC-M34-UWQHD-100-C
34"
VA
E-LED
250(±30)cd/m²
DVI: 3440*1440@60Hz
HDMI: 3440*1440@100Hz
DP: 3440*1440@100Hz
178 178
3000:1
9.7kg
Net Weight
Gross Weight
DisplayPort Cable
21:9
Eng-13
AC 100-240V~ 50/60Hz 2.0A