LCDARM A257 User manual

1/4
A257 TV lift Installation
Assume receiving package dimensional weight 92x22x18cm/12kg for 60cm stroke
All the parts (optional cable control, bottom connect)
Setup
Step 1 -> use TV screw(M4/M6), put ○ P1 parts in the VESA bracket of TV back
For example,
Customized stroke 60cm is suitable for 42”TV hiding
42”TV(W98*H59cm,VESA20x20cm),
A257(60cm trip), speed 36mm/sec, Horizontal Bracket 44cm
inside ceiling (15cm/base+60cm/TV)/hiding height
outside ceiling 60cm/extend

2/4
Step 2 -> insert ○ P2 bar into ○ P1 , take TV base stand away
Step 3 -> prepare ○ S1 screw with ○ P3 parts to lift in advance
Step 4 -> combine TV with lift, using ○ S2 screw

3/4
Step 5 -> plug all cables in the control box, this new outage box will shut down TV
simultaneously while turn off lift
Step 6 -> add 3xAAA battery for wireless control, (optional manual cable control)
Up & down direction is for floor and ceiling lift both way, (default is designed for floor)
Power on testing lift
Step 7 -> decorating the bottom plate with the (optional metal connection)

4/4