Le Veil iCigar DCH-12V2a User manual

Humidifier Instrucons
Le Veil iCigar DCH-12V2a(Model#:DCB001)
We care about quality in cigars
Thank you for purchasing this Le Veil product. This digital cigar humidifier features indoor
temperature, humidity (expressed as relave humidity or RH), temperature and humidity memory
(3 days average, high/low) and more. Please read this manual in its enrety to fully enjoy the
benefits and features of this product. Please keep this manual for future reference.
Note: A clear film is applied to the top face that needs be removed prior to using this product.
Locate the clear tab and simply peel to remove.
Humidifier features
Compact Fan and Clear Water Tank Design
q Recalibrang Technology for Accuracy
Maintains Up to 5 CB-FT Humidors
Inial Setup
A. Press and hold the ‘MODE’ buon for 3 seconds unl the RH seng numbers blink on the
display. Release the ‘MODE’ buon and use the ‘UP and ’DOWN’ buons to raise or
lower the humidity seng.
B. The fan will draw off moisture automacally when humidity is lower than 1% of what
it is set for (example: the humidity seng is 70% but the actual humidity is 69%).
The fan will stop when humidity is higher than the humidity seng by 1%
(for example: the humidity seng is 70%, but the humidity is 71 %).
C. Quickly Press MODE to switch from °C or °F.
D. Press the ‘Up’ or ‘Down’ buons to display the Max/Min humidity.
Humidity : Current humidity in humidor
Temperature : Current temperature in humidor
°C, °F : Celsius or Fahrenheit temperature
3 Days Avrg : 3 day average humidity in humidor
Max, Min : 3 day max or min humidity
7. External fan Terminal (Sold Separately)
8. Water cartridge
9. Hole to refill dislled water
and air Venlaon
10. Connecng tabs
11. 3 rubber O-rings
12. Water line
12
DOWN
1. LCD Hygrometer
2. Air venlaon/fan
3. Knob to open humidifier
4. Air vent
5. Sensor
6. Power Input Terminal

Adding/Replacing Water and Crystal Gel
Engineered in the United States
Manufactured in China
Patent rights issued and /or pending
Diseňado en Estados Unidos
Fabricado en China
Derechos de patente expedidos y/o pendientes
ConCu aux Etats-Unis
Fabriqué en Chine
Brevets déposét/ou en cours
1. Pour the bag of gel into the water tank.
2. Add dislled water into the water tank and fill to the water line.
3. Wipe off any excess water on the inside and outside of the fan unit.
4. Re-cover the water tank with the cover as shown above.
5. Allow 20 minutes for the gel to absorb the water.
6. Make sure there is no water near any electrical connecons before plugging the unit
into a power source.
Recommended Care
1. Place the humidifier on a middle or top shelf for best results.
2. Replace the gel every year.
3. We suggest keeping cigars at approximately 65% ~72% humidity and
60° ~70° room temp. High temperatures will promote mold on cigars.
DC Connection
Line
Humidifier
Small Tank
3 O-Rings
DC Converter
Remove any plasc bags and
packaging materials not shown
below.
Power Adapter
Recalibrang the Hygrometer
The hygrometer can be recalibrated if it displays inaccurate humidity levels by holding
down the ‘MODE’ buon and adjusng the numbers with the ‘UP’ and ‘DOWN’ buons.