Le Veil iCigar Hybrid DCH-220 User manual

Recalibrating the Hygrometer
Each Le Veil humidifier is equipped with a capacitive humidity
sensor, the same used in commercial laboratories. Most digital
hygrometers available are equipped with resistive sensors which can
have a RH variance of +-10%. Please make sure the
hygrometer used to match humidity has a capacitive humidity sensor.
To calibrate any Le Veil Humidifier, hold the 'MODE' button (keep
holding it) and before the numbers flash in the bottom right corner,
immediately adjust the meter with the 'UP' and 'Down' buttons. The
numbers on the upper left side of the humidifier will increase or de-
crease depending on what you need. Use this function to match the
humidifier to the other hygrometer that you are trying to match it to.
Tips
• Humidors over 100ct should utilize full power by
connecting the Hybrid to a power source via the
included cables.
• Be sure to adjust the air out ventilation depending
on your humidor size. Larger humidors need a more
open vent while smaller humidors will need the vent
to be smaller or fully closed.
• The Le Veil Hybrid will check humidity every 3 mins
and run the fan if needed on battery save mode
‘ON/S’.
Factory Pre-set 70%
Humidifier Accuracy +/- 3%
Humidity Range 40% ~ 90%
Wall Outlet Power 100~ 240V AC,
12V DC
Engineered in USA
Manufactured in China
Patent rights issued
and /or pending
www.leveil.us
Humidifier Instructions
Le Veil iCigar Hybrid DCH-220/22
Thank you for purchasing the Le Veil Hybrid. Please read this manual in
its entirety to fully enjoy the benefits and features of this product.
Humidifier features
• Easy to read display
Temperature
Relative Humidity
3 day average
• Calibratable hygrometer
• Rechargeable battery with micro USB port
• Low battery and water alarm indicator
• Maintains Up to 300CT humidors
Product Assembly Diagram
Note
• The fan will not turn on if the sponge is dry.

Charging the Battery
• The Le Veil Hybrid is equipped with a rechargeable Li-Ion battery and
needs to be fully charged before using it for the first time. If the Hybrid
has been inactive for a while it is recommended to fully charge it before
using as well.
• Turn the humidifier off and allow it to charge for approximately 12 hours.
The LED light will be red when the battery is charging and transition to
green when it is fully charged. Fully charged batteries can run
approximately 12 hours on the ‘ON’ (middle) position and approximately
25-30 days in battery save mode ‘ON/S’ (last) position.
• The LCD will display a battery icon and start playing an alarm sound
when the battery power is low. Press any button to turn off the alarm.
The Hybrid’s battery can be charged while running by connecting the flat
cable and plugging it into a power outlet. Allow for approximately 20
hours to achieve a full charge.
• Humidity – Current humidity in humidor
• Temperature – Current temperature in
• humidor
• °C , °F – Celsius or Fahrenheit temperature
• 3 Days Avrg – 3 days average humidity in
humidor
• Max, Min – 3 days maxim or minimum
• humidity
• -Showing water level in humidifier
1. 5V power terminal
2. 3 way power switch (ON/S - ON – OFF)
3. Power charge light
4. Digital LCD control panel
5. Ext Bluetooth adapter terminal
6. Control buttons
7. Air in ventilation
8. Humidity sensor
9. Air out ventilation
10. Latch
11. Ventilation switch
12. Back panel of humidifier
13. Connecting tabs
14. Resets memory button
15. Water sensor
Filling the Humidifier
• Turn off the humidifier and open the back cover to remove the sponge.
• Add filtered drinking water into the sponge then squeeze until water is no
longer dripping out of the sponge freely.
• Return the sponge into the well and reattach the cover. Wipe off any
excess water around the humidifier.
Setting the Target Humidity
Press and hold the 'MODE' button for 3 seconds until the RH setting numbers
flash in the bottom right of the screen.
Release the 'MODE' button and use the 'UP'
and 'DOWN' buttons to raise or lower the target
humidity/RH setting.
The humidifier fan will turn on and off depend-
ing on what the target humidity is set to.
Example: RH setting is 70%, the fan will acti-
vate at 69% and turn off at 71%.
Other Operations
Quickly press ‘MODE to switch from °C or °F
Press 'UP' or 'DOWN' to display the Max/Min humidity.
A low water alarm will sound when the unit needs to be refilled.
The display will also display a single water droplet
New humidors:- Move the power switch to the ‘ON’ (middle) position overnight
and let it run until the humidor reaches 70% then switch to power save mode
‘ON/S’. Very dry humidors may take over 1 week to fully season.
Recommendation: Keep cigars at appropriately 65%~72% humidity and 60°~70°
room temp. High temperatures will promote mold on cigars.