LEAB LPS II User manual

www.leab.eu
USER MANUAL
VERSION 5
LPS II
REMOTE DISPLAY
LEAB Automotive GmbH Thorshammer 6 24866 Busdorf

Table of contents
1 About this Manual................................................................................. 3
2 Safety .................................................................................................... 4
2.1 Intended use ...................................................................................... 4
2.2 Foreseeable misuse ........................................................................... 5
3 Technical specifications ......................................................................... 5
4 Package contents................................................................................... 6
5 About this product................................................................................. 6
5.1 PIN assignment .................................................................................. 7
6 Installation ............................................................................................ 9
7 Assembly ............................................................................................... 9
8 Operation .............................................................................................. 11
8.1 Switching on the unit ......................................................................... 12
8.2 Switching off the unit......................................................................... 12
8.3 Quick selection................................................................................... 13
8.4 Charge status (Status II) ..................................................................... 14
8.5 Operating data (Status III).................................................................. 14
8.5.1 12 V output ........................................................................... 14
8.5.2 12 V charging......................................................................... 15
8.5.3 230 V output ......................................................................... 18
8.5.4 230 V Charging ...................................................................... 19
8.5.5 Other settings........................................................................ 19
9 Disposal................................................................................................. 26
10 EU Declaration of Conformity ................................................................ 26
Table of contents LEAB Automotive GmbH

1 About this Manual
Read this manual carefully and keep it in a safe place. This manual is aimed at
Users.
Any modifications to the product or its components are prohibited and do not
conform to its intended use. Only use original LEAB or LEAB-approved ac-
cessories.
Throughout the manual, you will be alerted to warnings and safety notices
about potential hazards associated with handling the device. The colours and
signal words indicate the severity of the hazard:
Notice
Possibility of material damage
The signal word Attention indicates that there is a possibility of
material damage. To avoid material damage, follow the
instruction.
CAUTION
Danger that can lead to minor injuries
Safety instructions with the signal word CAUTION indicate a
hazard which, if not avoided, can result in minor or moderate
injury. Read the safety instructions carefully and follow them to
avoid the hazard.
WARNING
Hazards that can lead to severe injuries or death
Safety instructions with the signal word WARNING indicate a
hazard which, if not avoided, can result in death or severe injury.
Read the safety instructions carefully and follow them to avoid
the hazard.
3LEAB Automotive GmbH Thorshammer 6 24866 Busdorf
LEAB Automotive GmbH 1 About this Manual

DANGER
Danger that will lead to severe injury or death
Safety instructions with the signal word Danger indicate a hazard
which, if not avoided, will result in death or severe injury. Read
the safety instructions carefully and follow them to avoid the
hazard.
You will find useful tips and tricks in certain parts of the manual. These appear
as follows:
TIP
Tips provides additional, useful information.
Read the tip carefully and follow the instructions where
applicable.
2 Safety
This user manual is designed to help you handle the unit safely. Use the unit
solely in accordance with its intended use. Observe the safety instructions:
WARNING
Risk of injury due to cable fire
Using the unit at too high a voltage can cause a cable fire.
1. Only use the unit within the specified voltage limits.
2.1 Intended use
The LPS II remote display is an optional accessory for displaying operating and
service data of the LPS II.
The remote display can be used to switch the LPS II on or off and to activate
the emergency start function of the LPS II.
4 LEAB Automotive GmbH Thorshammer 6 24866 Busdorf
2 Safety LEAB Automotive GmbH

2.2 Foreseeable misuse
The unit has protection class IP21 and is designed exclusively for indoor use.
Do not mount the unit outside the vehicle.
The unit is designed for an operating temperature of -20°C ... +70°C. Only use
the unit within the specified temperature range.
The voltage limits of the unit are 9.8 V ... 32 V. Only use the unit within the
specified voltage limits.
3 Technical specifications
LPS II Remote Display Part number
Excluding connection cable 1051009008
Including connection cable 1051009020
LPS II Remote Display
Input voltage 9.8V … 32.0V
Operating temperature -20 °C … +70 °C
Installation depth (from contact sur-
face to connections)
Approx. 20 mm
Connections Molex 8-pin
IP rating IP21
Current consumption (active) 42 mA (12 V)
Current consumption (standby) 27 mA (display inactive)
Current consumption (off) 26µA
Weight 0.16kg
Dimensions (LxWxH) 142 mm x 72 mm x 51 mm
Connection cable Part no.: 1051009019
Cable length 6m
Connections Molex 8-PIN to M12
5LEAB Automotive GmbH Thorshammer 6 24866 Busdorf
LEAB Automotive GmbH 3 Technical specifications

4 Package contents
No. Name
x 1 LPS II Remote Display
x 1 Connection cable for LPS II remote display*
x 4 Mounting screws, flat head (Ø 2.9 mm x 19 mm)
x 1 User manual (incl. mounting template)
*only included with LPS II remote indicator part no. 1051009020
5 About this product
The LPS II remote display provides an overview of all relevant operating data
of the LPS II. It shows the charge status of the LPS II as well as the operating
data of the individual 12 V and 230 V outputs and inputs.
In addition, the LPS II remote display allows you to activate or deactivate the
individual 12 V and 230 V outputs simply by pressing a button.
1
2
3
Fig.1: LPS II remote display front
1 Display 2 Housing panel
3 Rotary knob
6 LEAB Automotive GmbH Thorshammer 6 24866 Busdorf
5 About this product LEAB Automotive GmbH

4
Fig.2: LPS II remote display back
4 Connector for Molex plug (8-PIN)
5.1 PIN assignment
Molex connector (8-PIN)
The Molex connector (8-PIN) is used to connect the LPS II remote display to
the LPS II.
Fig.3: Molex connector PIN assignment
7LEAB Automotive GmbH Thorshammer 6 24866 Busdorf
LEAB Automotive GmbH 5 About this product

PIN Item Description
1 Terminal 30 Battery positive
2 NC Not assigned
3 CAN Bus High
4 Output 1 Signal transmission: The output is active
when the remote display is active.
5 Terminal 31 Ground
6 NC Not assigned
7 CAN Bus Low
8 Output 2
M12 connector
The M12 connector enables external devices or signals to be connected to the
LPS II remote display.
Fig.4: M12 connector PIN assignment
PIN Assignment
1 Battery positive
2 Battery positive
3 Ground
4 Can Bus High
5 Can Bus Low
8 LEAB Automotive GmbH Thorshammer 6 24866 Busdorf
5 About this product LEAB Automotive GmbH

6 Installation
To install the unit, proceed as follows:
1. Insert the supplied Molex connector of the connection cable into the con-
nection for the Molex connector on the back of the LPS II remote display.
ðThe Molex connector audibly clicks into place.
2. Insert the M12 plug of the connection cable into the marked M12 connec-
tion on the back of the LPS II.
ðThe unit is installed.
LPS II Remote Display
Fig.5: LPS II remote display wiring diagram
7 Assembly
WARNING
Risk of injury due to improper work
The use of unsuitable tools to cut out the mounting area and not
wearing the necessary protective clothing can lead to injuries.
1. Use suitable tools, such as a jigsaw.
2. Wear protective gloves during assembly work.
9LEAB Automotive GmbH Thorshammer 6 24866 Busdorf
LEAB Automotive GmbH 7 Assembly

Notice
Unit defects from welding work on the vehicle
The electronics of the unit can be damaged by high currents.
1. Disconnect the unit from the vehicle's electrical circuit before
performing welding on the vehicle.
To mount the unit, proceed as follows:
1. Use the enclosed mounting template to transfer the dimensions for cutting
out the unit to the desired mounting location.
2. Cut out the marked area at the mounting location.
WARNING!Risk of injury from improper work. Use suitable tools, such
as a jigsaw, and wear appropriate protective clothing.
3. To remove the covers from the mounting holes of the unit, slide the left
and right housing panels to the side.
4. Insert the unit into the mounting cut-out.
5. Mark the position of the fastening holes with a pin.
6. Disconnect the connecting cable from the unit by removing the Molex con-
nector on the back of the LPS II remote display.
7. Guide the connecting cable through the mounting cut-out.
8. Insert the Molex connector of the connection cable into the connection for
the Molex connector on the back of the unit.
9. Secure the unit with the screws supplied (Ø 2.9 mm x 19 mm). Pre-drill the
screw holes if necessary.
10.Place the housing panels back on the unit.
ðThe unit is assembled.
10 LEAB Automotive GmbH Thorshammer 6 24866 Busdorf
7 Assembly LEAB Automotive GmbH