LEADER AER AL LD-ZM2.0 User manual

LD-ZM2.0
DRONE LIGHTING DEVICE
User Manual V1.0
2023.03
Please read this book carefully and keep it properly before using this product
If you have any questions, please contact the sales personnel

1
Cautions
1. Please confirm whether the drone usage platform can mount this product
before use.
2. Follow the installation instructions for safe operation, correctly connect the
power supply, and tighten the hanging screws.
3. During normal storage, transportation, and use, attention should be paid to
moisture-proof, waterproof, dustproof, high-temperature resistant, fireproof,
and anti-collision.
4. The power supply voltage is 12V to 30V, and the power supply interface JST
plug has no reverse connection protection. When powering on, it is necessary
to pay attention to the positive and negative poles.
5. When using, it is necessary to follow the rated power and pay attention to
voltage matching to avoid damaging this product or your drone equipment.
6. This product belongs to high-tech electronic products. If there are quality
issues, please do not disassemble it without permission to avoid damaging
your warranty rights.

2
Catalogue
Cautions ................................................................................................................................................. 1
Introduction..........................................................................................................................................3
LD-ZM2.0 ...................................................................................................................................... 3
Part Name .....................................................................................................................................3
Installation .............................................................................................................................................4
Preparations.................................................................................................................................4
Mount installation ..................................................................................................................... 4
Control and operation ...................................................................................................................... 5
Startup operation .......................................................................................................................5
Remote control operation...................................................................................................... 5
SPEC.........................................................................................................................................................6

3
Introduction
LD-ZM2.0
This product has the advantages of small size, light weight, quick disassembly
design, and controllable light source; The three level light source design can
provide high-quality aerial lighting effects for night operations of unmanned aerial
vehicles, and is very suitable for night operation needs such as night patrol tasks,
direction indication, power line patrol, warning evacuation, search and rescue, etc.
Part Name
1. Quick release parts
2. Shock-absorbing ball
3. Electric Control Motor Stability Enhancement System
4. Signal receiver
5. LED Beads

4
Installation
Preparations
Before installation and use, the following items need to be prepared:
M600 drone, drone lighting device, six channel remote control.
Mount installation
The installation board is pre installed with quick release components, which can be
quickly removed. Unscrew the bright hand screws, open the cover and align it with
the appropriate position of the drone mounting rod, cover the quick release
component cover, tighten the bright hand screws, and fix the lighting device under
the drone. Connect the power supply line to the 6S voltage power supply plug
below the body to power it up.

5
Control and operation
Startup operation
Pick up the remote control, do not touch the joystick, reset all the toggle switches
above the remote control, hold down the power icon button with both hands and
thumbs for about 3 seconds, and the remote control will turn on. The shutdown
method is consistent with the startup method. After the screen displays a normal
screen with no error prompt, turn on the installed drone and power it on. At this
time, there should be a sky voltage display in the upper right corner of the remote
control screen, indicating that the connection has been successful. Otherwise,
please contact technical support.
Remote control operation
The remote control version uses the remote control to control various functions
(equipped with 4 No. 5 batteries);
The left joystick of the remote control turns on the light upwards, turns off the light
downwards, and switches back and forth to switch the light;
Push the right joystick up to move the light up, push the joystick down to move the
light down, push the joystick left to move the light left, and push the joystick right
to move the light right. When the remote control is turned off, the lighting device
maintains the command before turning off.
Note: The non remote control version is applicable to UAVs with remote control
expansion channel module. It will be equipped with signal pair wiring. The default
length is suitable for M600 UAVs. Insert the signal line into multiple F channel
interfaces of flight control as required, and adjust the channel settings in the UAV
parameter adjustment software. Novice and inexperienced personnel are not
recommended to purchase the non remote control version.

6
SPEC
Specifications
LD-ZM2.0
Size
198*178*105mm
Outer packaging box
370*268*186mm
Material quality
7075 aviation aluminum
Weight
1KG
Installation method
Quick release type
power supply
24V body power supply
rated power
30W
Rated brightness
4000 lumens
Spot diameter
3M
Color temperature
6500K
Effective distance of
illumination
300M
Control mode
Independent remote control
Control signal type
PWM signal control
Controlling Distance
800M
Expand channels
Can support M600 expansion channel function
(if you need this function, please contact sales first)
Linear rotation axis
Direction axis rotation 360 degrees Pitch axis 135 degrees
Stabilizing method
Electrically controlled motor stabilization
Warranty
1 year
Application
M600 Pro and Rufeng series (other independent models,
please contact sales first)

7
Remote control
Size
180*82*161mm
weight
392g
Input power supply
6V 1.5AA*4
Data output
PS2 interface PPM
Frequency range
2.4055 - 2.475GHZ
Band width
500KHZ
Transmitter power
Not higher than 20dBm
Low voltage alarm
Below 4.2V
Charging interface
Not have
Length of antenna
26 mm * 2 (dual antenna)
Display method
STN semi transparent positive display,
128x64 dot matrix VA73 * 39mm LED white backlight