Leanschi WS01 User manual

WATCHWINDER “WS01”
IN S T R U C T I O N S M A N U A L
(ENG)
To enable smooth and proper operations, please carefully read and preciously keep this notice
for future perusal.
This INSTRUCTION MANUAL is available in different languages.
Check online LEANSCHI.com/ DOWNLOADS for further languages & updates.

Thank you for having purchased this LEANSCHI product!
It is guaranteed for 3 years from the date of purchase.
It has been carefully manufactured for enabling a proper storage for your finest
timepieces, insuring their full functionality and your own full satisfaction.
BOOST and SLEEP functions are advanced and specific features you will find built-in
some LEANSCHI watchwinders. Make sure you properly use them to avoid
troubleshooting.
Our team and/or our official retailers remain at your disposal in case of questions or
remarks related to this device’s operations.
www.leanschi.com

TECHNICAL FEATURES | WS01 1034
POWER ADAPTOR:
IN: 100-240V –OUT: 3V, 1,2A
BATTERIES
2x ALCALINE “AA” - LR06
ADJUSTABLE NUMBER of ROTATIONS
per DAY (TPD=Turns Per Day):
650 –800 - 1.000 - 1.900 or “BOOST”
BOOST FUNCTION:
YES
DIRECTION SELECTION:
clockwise, anti-clockwise, both directions
MATERIAL:
(depending on version)
MDF-wood frame
EXTERIOR: PU-leather | lacquered wood
INTERIOR: PU-leather | rubber | lacquered wood
MOTOR:
Quality & silent Japanese motor (MABUCHI)
OPERATING TEMPERATURE:
-20°C –50°C
Last Update: 2017
WATCH-TEAR and FATIGUE
Our device has been specially conceived to take great care of your watches. Therefore,
it will gently rotate the desired TPD and stop in-between. The effective time of winding
is much shorter than the rest-time granted to your watch to avoid unnecessary
movement and components fatigue.

FRONT BACK
*serial plug to link up to 3 winders to a single A/C adaptor
A/C PLUG-IN
WATCH-HOLDER
CONTROL LED
OFF + DIRECTION
button
SERIAL
PLUG-OUT*
TPD
button
BATTERIES
compartment
2x LR06 -„AA“

REMOVING / PUTTING your WATCH onto the WATCHWINDER
To REMOVE the watch-holder from the watchwinder, firmly PRESS on both
watchholder’s ears and PULL out of the winder-barrel.
To PLUG the watch-holder back into its barrel, firmly PRESS on both holder’s ears and
gently PLUG-IN the holder into the 2 sides-holes on the winder’s barrel.

IMPORTANT NOTES
-Only use the A/C adaptor which has been delivered with your watchwinder.
-Never open or dismantle the winder nor unscrew its body or case.
-Always STOP the winder before you remove / insert a watch.
Beware:
The non-observance of those recommendations may lead to guarantee cancellation.
FURTHER RECOMMENDATIONS
-Do not expose your watchwinder to direct sun-rays
-Do not locate it close to a source of heat (It may not only damage your device; it is
a source of hazard for your valuable timepieces too).
-Do not place your watchwinder close to a source of magnetism (avoid TV-sets,
monitors, loudspeakers and so on…)
-Never dispose your device with the regular waste. It can possibly be repaired.
-If you have to dispose it, strictly stick to disposal regulations for electronic devices
in force in your country.

OPERATIONS | How to set my winder ?
1) Plug-In the A/C adapter to the watchwinder and to a A/C-plug OR insert the
batteries in the batteries-compartment (If you choose to supply your
watchwinder through A/C and A/C-supply, we recommend to REMOVE the
batteries).
2) SELECT the cycle best suitable for your timepiece. The “TPD” (Turns-Per-Day)
buttonis located on the watchwinder ‘s back: 650, 800, 1.000, 1.950 TPD or
BOOST-function.
3) SWITCH-ON the main SWITCH / “DIRECTION” button, and select the
WINDING motion: CLOCK-WISE, ANTI-CLOCKWISE or BOTH DIRECTIONS
4) Using our optional CONNECTING CABLE, you can link a 2nd winder (plug “IN”)
with your MAIN winder (plug “OUT”), using a single A/C adaptor for up to 3
watchwinders “WS01”.

SLEEP FUNCTION
12 hours after it has started operation, your winder will stop for the consecutive next 12
hours (i.e. night sleep).
Programming your winder just before 9 o’ clock in the morning would make it stop
during the night from 21:00 onward to 9:00 on the next day. This function is useful to
keep your watchwinder noiseless during the night if you have it in your bedroom.
BOOST FUNCTION - BOOST TPD
For automatic watches which may have stopped due to empty power-reserve, selecting
the “BOOST”setting will rotate your watch continuously for one hour…before switching
then automatically to 1.000 TPD mode.
24hrs after the boost function has been set, you should re-adjust your winder settings in
accordance with your watch requirements. We recommend however to always wind-up
a bit your watch manually before putting it on its winder.
EOL (End-Of-Life) FUNCTION (for batteries-powered watchwinders only)
When batteries get weak and need replacement, the build-in GREEN LED is blinking
twice every 2 seconds. In such a case, change the batteries within 1 month.

OPERATING MODES
“TPD” = Turns Per Day or the number of full rotations within a day (24 hours).
TPD 650
Winder is rotating for 1 minute and rest for 472 seconds before re-starting the same cycle
TPD 800
Winder is rotating for 1 minute and rest for 347 seconds before re-starting the same cycle
TPD 1000
Winder is rotating for 1 minute and rest for 286 seconds before re-starting the same cycle
TPD 1950
Winder is rotating for 1 minute and rest for 117 seconds before re-starting the same cycle
TPD “BOOST”
(available on some winders)
Winder is rotating continuously for 1 hour and returns to TPD 1000 right after
To be used for watches which power-reserve was completely exhausted and had stopped as a
consequence.

TROUBLES SHOOTING
There is no motion on my winder
1. Check if you correctly plugged the A/C cable and adaptor.
2. If no A/C-adaptor cable has been plugged-in, make sure your batteries are OK and correctly
placed in their compartment.
3. Check if your DIRECTION-buttonhas been switched ON; respectively if you chose a TPD-
program.
4. Switch-OFF the DIRECTION-buttonbefore re-selecting your program / cycle: the winder should
start.
5. Make sure your winder is not in the SLEEP-phase.
Your watch stops despite the winder’s rotations
1. Raise the number of TPD
2. Check with the watch-manufacturer if the watch’s oscillating mass is winding up the watch
CLOCKWISE, ANTICLOCKWISE or in both DIRECTIONS. Adapt your settings in accordance.
3. Wind-up 10-20 times your watch crown before you put it on your watchwinder
For any further troubles, never hesitate to ask our authorized LEANSCHI retailer.
Check the nearest retailer’s location under leanschi.com
For our ENVIRONMENT sake, never dispose old batteries in the regular waste-bin. Bring them back
to a suitable batteries disposal & recycling centre.