LEDGE AUTOGRAPH CHAIR User manual

THANK YOU FOR YOUR PURCHASE
Our team of expert designers, craftsmen, and pool
industry professionals have obsessed over every detail
of your Autograph Chair. From concept to delivery,
every decision was made with you in mind. Sweating
the smallest things is our goal, so you can enjoy the
big things that matter - making lifelong memories.
Your outdoor experience comes with peace of mind.
That’s why we pride ourselves on long-lasting,
low-maintenance outdoor living, and we back
it up with a best-in-class warranty.
If you aren’t happy with your purchase, please give us
a call at 888.749.5336. We will do whatever it takes to
make it right.
BEFORE YOU START
For fun and eective setup, prepare to get wet. Throw
on your bathing suit, gather your setup materials
and jump in!
IMPORTANT NOTE
The Autograph Chair is designed for water depths up
to 12” or on-deck.
AUTOGRAPH CHAIR
REQUIRED TOOLS
FLATHEAD SCREWDRIVER

STEP 1: Place the Autograph Chair upside down
on the shallow end of your pool. Remove the plugs
from the front and rear fill holes with a flathead
screwdriver.
STEP 2: Submerge the front fill hole first and allow
water to start filling the chair. You will hear the cavity
filling from the rear fill hole.
STEP 3: Allow the chair to submerge. Water will enter
quickly. Once the entire chair is filled, rock it several
times front to back to release any remaining air.
STEP 4: Keep the chair submerged and screw the
plugs back in. Handle plugs carefully to avoid
cross-threading them.
STEP 5: Turn the Autograph Chair right side up and
position the base on the edge of the ledge. Carefully
slide it into its final location.
STEP 6: Enjoy your new Autograph Chair and begin
creating life’s most meaningful moments. Tag us for
a chance to be featured!
CARE AND MAINTENANCE
ROUTINE CLEANING
Clean with a soft cloth, microfiber towel, or spray
down with a water hose. For a deeper clean, use mild
soap and water with a soft bristle brush.
POWER WASHING
Use caution to avoid inscribing your Autograph Chair.
Start with a very low PSI at least 3 feet away from
furniture, and test on the under side before moving
closer. Move closer or increase PSI gradually and with
caution until dirt is removed. Check often to ensure
no inscription is left on furniture.
SHOW US HOW YOU LIVE THE LEDGE LIFE