LEDLux STOREHAUGEN Series User manual

www.ledlux.no
STOREHAUGEN 100 LED / STOREHAUGEN 200 LED
Instruction Manual
LED Industrial Light (STOREHAUGEN Series)
Wire Connection
Connection box
external cable
Brown
Yellow/Green
Blue
Meanwell Driver

Model STOREHAUGEN 100 LED STOREHAUGEN 200 LED
Input Voltage 100-240~50/60HZ
Power
Factory(PF) >92%
Rated Power
Consumption 100W 200W
Rated Color
Temperature Pure white:5000-5500K warm white:4000-4500K
Rated Luminous
Flux 8000lm 16000lm
Color Rendering
Index(CRI) ≥70
Working
Temperature -30~50°c
Working Humidity 10%~90%RH
Working life 50000h
Net weight 4.7kg 8.0kg
IP Rating IP65
Working Humidity 4-8m 10-20m
128 175
Bl
ue
Yellow/Green
Brown
Attention
Product Feature
Installation
● Please do not modify the lamp or change the parts by yourself to avoid the
damage, fault, re and electric shock accident.
● Please ask the qualied company or professional people to make installation
according to the instruction. If install without care it may cause fault, electric
shock, re accident and no warranty .
● When cleaning, please use a soft rag with liquid to make the cleaning rst, then
use a dry rag to remove dust and water. Please do not clean with corrosive
material to avoid the color fade and damage.
● When there is abnormal phenomena to the lamp, please cut the power
immediately and contact our local agent or professional engineer to check, do
maintenance, or replacement with new ones.
● If you have any questions to our instruction, please consult qualied engineer.
● The lamp body surface is anodized, it is corrosion protective and compact
structure.
● Green and eco-friendly lamp. No pollution to the environment, not containing lead
and mercury material.
● CREE led source, high efciency, long stable working life.
● Easy installation, can be used in all elds.
● Saving above 60% electricity comparing with the conventional lamps.
● Super long working life, very low maintenance cost.
● Power factory above 0.9. No bad affect to the power grid.
● Make a ¢ 10mm hole in the ceiling where you install the lamp and put the plug
inside the hole.
● Screw the hoop into the plug.
● Take the lamp out from the box and install the lamp hanging on the hoop.
(Contact Us if you need any special safety hook for the installations) For
mounting with arm, you have to follow the same procedure, but use bolts to the
ceiling/wall construction.
● The electric wire connection: Brown wire connect to (L) , Blue wire connect to (N)
, Yellow/Green wire connect to Earth, and make sure of insulation.
● Turn the power on. Make sure that lamp working fine, then finish the installation.
If any fault please contact your local dealer as soon as possible.
STOREHAUGEN 100 LED STOREHAUGEN 200 LED
Unit:mm