Lee Filters SW150 User manual

SW150 Lens Adaptor Assembly Instructions
FUJIFILM 8-16MM F2.8 XF LENS ADAPTOR
Stage 2
Slide the Compression Ring over the lens hood
and down the lens until it clicks in position and
can be pushed no further. Make sure the text on
the ring is facing the front of the lens.
F
U
J
I
F
I
L
M
8
-
1
6
m
m
Stage 1
The Lens Adaptor is made up of three rings:
1. Front Ring (small lugs)
2. Compression Ring (split)
3. Locking Ring (largest threaded ring)
All three rings are supplied screwed together, unscrew from each other before
assembly. To fix the Lens Adaptor the lens must be o the camera.
1 2 3

Stage 3
Place the Front Ring over the lens shade, making
sure the small lugs are furthest from the lens body.
The ring will then locate into the correct position.
Stage 4
Invert the lens, keeping the front ring in place
with your fingertips. Slide the Locking Ring
over the rear of the lens and position it over
the Compression Ring. Ensure the flange of the
Locking Ring is facing towards the rear of the lens.
Stage 5
Screw the Locking Ring into the Front Ring in a
clockwise direction until tight. The Adaptor is now
fixed in place and ready to use with the SW150
Filter Holder.
www.leefilters.com