Lee Jackson PLATINUM DISTORTION User manual

PLATINUM DISTORTION
USER MANUAL

About the Lee Jackson Platinum Distortion
I wanted the Platinum Distortion to be the next step in distortion pedals, and
be the next iconic and ground breaking pedal
I feel we have done it with the Platinum Distortion, creating features not seen
before, and a sound that is just amazing.
I thank you for being a part of the next generation of iconic artists, that
together will create the new tonal frontier.
The Platinum Distortion pedals are built with the best parts available and you can hear it.
From the warmest distortion to the heaviest metal. We know you will be extremely excited
every time you turn it on and play through it.
_______________________________________________
Lee Jackson

FRONT PANEL CONTROLS
1) INPUT instrument jack (Right side)
2) OUTPUT jack (Left side)
3) TONE control
4) TONE SWITCH
5) GAIN control
6) DISTORTION SWITCH
7) POWER connector - 2.1 mm Center Tip Ground - +9 vdc
8) LED light
9) FOOTSWITCH switch
INPUT JACK provides input to the Platinum Distortion amplifier.
OUTPUTJACK provides output to an effects chain or amplifier.
TONE adjusts the overall frequency response of the pedal.
In the middle it is close to a flat response, turning it left increases highs,
And turning it right increases low's.
TONE SWITCH turns the tone control on and off,
Every pedal that has a tone circuit, limits some of the frequencies when used.
By bypasses it you can allow the full frequency of your instrument to pass through.
GAIN adjusts the signal strength coming out of the instrument, and going into the first
Dsitortion stage.
DISTORTION SWITCH Has three positions, in the middle it is off and allows the second
distortion stage to operate cleaner.
Position 1 and Position 2 are completely different styles of distortion, and by activating them
you can get sounds from smooth singing distortion to full Metal Meltdown.
OUTPUT (MASTER) sets the master volume of that channel

MODEL: Platinum Distortion
SERIAL #: _______________________
INPUT VOLTAGE: +9v - +12 vdc 2.1 mm center tip ground
Http://www.leejackson.com/
MADE IN THE USA