Legacy LR185D User manual

Maximum Output Power.........................................................80 Watts
Power Supply Requirements.......................DC 12 Volts. Negative Ground
Chassis Dimensions............................................181(W)X147(D)X53(H)
SPECIFICATION
ANTI-THEFT FULL DETACHABLE SYSTEM
WITH AM/FM TUNING RADIO
Frequency Range..........................................................88MHz-108MHz
Frequency Range........................................................530KHz-1700KHz
FM SECTION
AM SECTION
GENERAL
WIRING CONNECTION
REAR CABINET
ANTENNA JACK
RCA LINE OUT
RED FUSE 3A
FUSE 0.5A
TO +12V BATTERY
RED
B+ MEMORY
PINK
AUTO ANT+ YELLOW
R
+
GREEN
- -
+
GREY
BLACK
L
WHITE
GROUND
LEFT
SPEAKER RIGHT
SPEAKER
LEGACY
LR185D
INSTRUCTION MANUAL

LOCATION AND FUNCTION OF CONTROLS
1. SEL AND +/- BUTTON
Press it can select VOL/BAS/TRE/BAL. And with the +/- to adjust volume,
treble, bass, balance, when select the VOL/BAS/TRE/BAL function, LED
will indicate.
2. LOUD BUTTON
Press it to get the best loudness quality during it is for bass. And word
LOUD will indicate.
3. EJECT BUTTON
Press it to eject the tape.
4. FAST FORWARD/REWIND PROGRAM BUTTONS
5. LO/DX BUTTON
Press this button for distance reception when you are located at weak signal
location. Depress this button for stronger signal.
6. TUNE KNOB
Rotate this knob to get your desired radio station.
7. LED INDICATORS
8. CD INPUT JACK
9. LCD [LIQUID CRYSTAL DISPLAY]
10. CLOCK ADJUSTMENT BUTTON
When time on display push SET button and H or M button together
at the same time to adjust HOUR or MINUTE. When adjustment is
completed, release both buttons.
11. BAND BUTTON
Press the button to select you desired band.
12. MO/ST BUTTON
Press it to change sound effect. [MONO keep remain]
13. PWR BUTTON
Press it to turn on or off the unit.
14. RELEASE BUTTON
Press it to eject the front panel the unit.
INSTALLATION