Legacy Blakeslee BB914 User manual

BLAKESLEE
Division of The Legacy Companies
MODELS BB914, BB2016, BB1224
BURNISHER
1228 Capitol Dr.
Addison, IL 60101
Phone [phone]
Fax [phone]
www.blakesleeinc.com
[email protected]
1149 Bellamy Road North Unit 19
Scarborough, Ontario Canada M1H1H7
Phone [phone]
Fax [phone]
Revised 01/2013
OWNER’S
MANUAL
BB914
BB1224
BB2016

●
●
In no case can this warranty exceed eighteen (18) months from the date of shipment from our
plant at Addison, Illinois
Tub lining is guaranteed for 3 years from date of installation. Service labor is not included in
this extended warranty.
Your new Blakeslee product has been carefully manufactured and tested.
Occasionally you may experience a problem with your new machine and if it is due to a defective part
or workmanship, we will be more than happy to repair it at no charge to you as stated in our
guarantee.
Like any other piece of equipment that is being heavily used, the machine will require periodic
cleaning and maintenance. This cleaning and maintenance is the owner’s responsibility and is not
covered under out warranty. The compound recirculating tank must be emptied and replenished
every eight hours of use to prevent the waste material from damaging the pump seal. Compound and
water must be in the tank whenever the machine is in operation to lubricate the seal of the pump.
Date of Installation
Serial
No.
Model
No.
Limited Warranty
Your new Blakeslee burnisher is warranted for one year from date of installation shown
above against defective materials and workmanship. If any defects are found within the
warranty period; parts, and labor involved with their replacement will be covered free of
charge. Service must be performed by a Blakeslee authorized service agency. All labor to
be performed during regular working hours. Overtime premium will be charged to the
customer. All warranty parts are shipped by surface transportation. If other means of
transportation is requested the customer is required to pay the premium. This warranty
does not apply to damages resulting from errors in installation on the part of other
contractors, nor does it apply to machines which have been subject to accident, misuse, or
abuse. It is understood that Blakeslee’s warranty obligation with respect to machines
located outside of the United States or located in the state of Alaska is limited to the
furnishing of replacement parts only. In the state of Hawaii, repair labor is provided free of
charge; travel time and expenses paid by the customer. On the island of Oahu, repair labor,
travel time and expenses are provided free of charge. This is the entire and only warranty
of Blakeslee. We neither assume nor authorize anyone else to assume for us any other
obligation or liability in connection with Blakeslee Machines.

TABLE OF CONTENTS
SECTION 1.
INTRODUCTION
1
1-1.
1-2.
1-3.
General
Description
Specifications
1
1
1
SECTION 2.
INSTALLATION
3
2-1.
2-2.
Unpacking the Unit
Installation
3
4
SECTION 3.
OPERATION
7
3-1.
3-2.
3-3.
3-4.
General
Preparing the compound
Operation
Draining and cleaning the Unit
7
7
7
8
SECTION 4.
MAINTENANCE
9
4-1.
4-2.
4-3.
4-4.
4-5.
4-6.
4-7.
4-8.
4-9.
4-10.
4-11.
4-12.
4-13.
Daily
Monthly
Bi-Monthly
Replacing Tub Drain Screen
Media Replacement
Motor Belt Replacement & Adjustment
Converting “V” Belt Drive to “O” Ring Drive
Eccentric Bearing Replacement
Media Tub Replacement
Compound Pump
Drive Motor Rotation
Wiring Diagrams and Schematics
Troubleshooting
9
9
9
9
10
10
10
11
12
13
13
13
14
SECTION 5.
ILLUSTRATED PARTS LIST
15

1/2

3

4

5/6

7

8

9

10

11

12

13

14

15
BLAKESLEE
1844 S. Laramie Avenue
Chicago, Illinois 60804
708-656-0660

16

FIGURE 5-1. MODEL BB914 MAIN ASSEMBLY
ITEM
NO.
PART
NO.
DESCRIPTION
QTY.
REQD.
1
W-0-17916
FRAME ASSY, w/electric box and casters, epoxy painted
1
2
W-0-17917
TUB WELDMENT, Complete w/urethane lining and epoxy paint
1
3
W-0-17919
RUBBER BUMPER
8
4
W-0-17920
SPRING, Painted, set of 4
1
5
W-0-17921
CASTER, w/brake, w/o bracket
1
6
W-0-18017
CASTER w/brake, w/ bracket
1
7
W-0-17922
BRACKET, For casters, unpainted
1
8
W-0-17923
ABS GUARD, Left side switch opening, w/double coated tape and rivets
2
9
W-0-17924
ABS GUARD, Right side w/tape and rivets
1
10
W-0-17925
ABS GUARD Front and/or rear, w/o fasteners
1
11
W-0-17926
FASTNER KIT, Quick disconnect, for front and rear guards, 3 piece Assy.
1
12
W-0-17942
TOGGLE SWITCH (Older machines)
1
12A
W-0-77589
STARTER SWITCH
1
12B
W-0-77590
HEAT ELEMENT
1
13
W-0-17929
COMPOUND PUMP 110V 60 CYCLE
1
13A
W-0-95556
COMPOUND PUMP 230V 50/60 CYCLE
14
W-0-17930
HOSE ASSY, Compound supply, ¼”-28 x 1 ½” long
1
15
W-0-95016
DRAIN HOSE ASSY, Complete with 5/8” hose
1
16
W-0- 17932
COMPOUND TANK
1
17
W-0-17933
FLANGED BEARING ASSY, Painted
2
18
W-0-17935
BEARING BOLT KIT
1
19
W-0-17934
SHAFT
1
20
W-0-20766
ECCENTRIC WEIGHT ASSY, Consists of:
1
21
W-0-20765
•ECCENTRIC WEIGHT
1
22
W-0-20460
•SCREW, Socket head, ¼”-28 x 1 ½: long
1
23
W-0-07023
•LOCKWASHER, ¼”
1
24
W-0-20313
•NUT, ¼”
1
25
W-0-20456
PULLEY, Driven, double groove, serial no. 77-001 and up
1
25A
W-0-17936
PULLEY, Driven, single groove, serial no. 77-000 and below
1
26
W-0-20458
PULLEY, Drive, double groove, serial no. 77-001 and up
1
26A
W-0-17938
PULLEY, Drive, single groove, serial no. 77-000 and below
1
27
W-0-20459
BELT, “O”-ring type, serial no. 77-001 and up
2
27A
W-0-16907
BELT, “V” type, serial no. 77-000 and below
1
28
W-0-95057
MOTOR, ½hp, 3450 rpm, 110/220 V, 1 phase, 60 cycle
1
28A
P-1-05280
MOTOR, 1/3 hp, 1725 rpm, 110/220 V, 1 phase, 60 cycle
1
28C
W-0-76306
MOTOR, ¾hp, 3450 rpm, 110/220 V, 1 phase, 60 cycle
1
29
W-0-17940
CABLE, Electrical w/connectors, motor to switch
1
30
W-0-17941
CABLE, Electrical, w/connectors power supply
1
31
W-0-17943
COVER s/s toggle switch
1
32
NLA
33
W-0-17927
MEDIA RETURN TOP DECK, w/decal and chrome fastener
1
34
W-0-17928
TUB COVER, Can be used only with media return top deck
1
35
W-0-18618
DECAL, Silver Saver
1
36
W-0-20340
DECAL, Serial no.
1
17

18

FIGURE 5-2. MODEL BB2016 MAIN ASSEMBLY
ITEM
NO.
PART
NO.
BB2016
DESCRIPTION
QTY.
REQD.
1
W-0-18675
FRAME ASSY, w/electric box and casters, epoxy painted
1
2
W-0-17917
TUB WELDMENT, Complete w/urethane lining and epoxy paint
1
3
W-0-17919
RUBBER BUMPER
8
4
W-0-17920
SPRING, Painted, set of 4
1
5
W-0-17921
CASTER, w/brake, w/o bracket
1
6
W-0-18017
CASTER w/brake, w/ bracket
1
7
W-0-17922
BRACKET, For casters, unpainted
1
8
W-0-18678
COVER, Left side w/switch opening, included double sided tape and screws
2
9
W-0-18678
COVER, Right side includes double sided tape and screws
1
10
W-0-18680
COVER, Front and/or rear
1
11
W-0-17926
FASTNER KIT, Quick disconnect, for front and rear guards, 3 piece Assy.
4
12
W-0-17942
TOGGLE SWITCH (Older machines)
1
12A
W-0-77589
STARTER SWITCH
1
12B
W-0-77590
HEAT ELEMENT
1
13
W-0-17929
COMPOUND PUMP 110V 60 CYCLE
1
13A
W-0-95556
COMPOUND PUMP 230V 50/60 CYCLE
14
W-0-17930
HOSE ASSY, Compound supply, ¼”-28 x 1 ½” long
1
15
W-0-95016
DRAIN HOSE ASSY, Consists of the following parts
1
•FAUCET AERATOR
1
•ADAPTER, Hose connector to aerator
1
•HOSE CONNECTOR, ½” male
1
•POLYVINYL TUBING, 5/8” x ½” x 6 ½” long
1
W-0-20325
•COUPLING, Reusable
1
16
W-0- 18681
COMPOUND TANK
1
17
W-0-20459
BELT, “O”-ring type, serial no. 77-001 and up
2
17A
W-0-16907
BELT, “V” type, serial no. 77-000 and below
1
18
W-0-20456
PULLEY, Driven, double groove, serial no.20S-77-001 and up
1
18A
W-0-17936
PULLEY, Driven, single groove, serial no. 20S-77-000 and below
1
19
W-0-20458
PULLEY, Drive, double groove, serial no. 20S-77-001 and up
1
19A
W-0-17938
PULLEY, Drive, single groove, serial no. 20S-77-000 and below
1
20
W-0-95058
MOTOR, 1 hp, 3450 rpm, 110/220 V, 1 phase, 60 cycle
1
20A
W-0-18684
MOTOR, ¾hp, 1725 rpm, 110/220 V, 1 phase, 60 cycle
1
21
W-0-17940
CABLE, Electrical w/connectors, motor to switch
1
22
W-0-17941
CABLE, Electrical, w/connectors power supply
1
23
W-0-17943
COVER, s/s toggle switch
1
24
W-0-20336
RELAY, Timing, (late production models) 110V 60cycle
1
24A
W-0-95557
RELAY, Timing, (late production models) 220V 50cycle (export only)
1
25
W-0-20335
SOCKET, Timing, (late production models)
1
26
W-0-15971
TIE WRAP, Timing, (late production models)
1
27
NLA
28
W-0-18687
TUB EXTENSION
1
29
W-0-18618
DECAL, Silver Saver
1
30
W-0-18688
TUB COVER
1
31
W-0-18691
HOSE KIT, Compound tank drain, includes connector and spring clip
1
32
W-0-20338
ECCENTRIC SHAFT ASSY (See fig. 5-4 for details)
1
33
W-0-20338
DECAL
1
34
W-0-20340
DECAL
1
19