LEGRAND 4 305 53 User manual

4 305 54
4 305 55
USER MANUAL
4 305 53
• LAN recorder for 4/8/16 cameras
4 305 53 / 54 / 55
LE03754AC

CONTENTS
1. CONTENTS OF THE PACKAGING ...............................................................................3
2. CONTROLS AND LOCATIONS.....................................................................................4
2.1 4 305 53 FRONT PANEL................................................................................................................ 4
2.2 4 305 53 REAR PANEL .................................................................................................................. 6
2.3 4 305 54 / 4 305 55 FRONT PANEL .............................................................................................. 7
2.4 4 305 54 / 4 305 55 REAR PANEL ................................................................................................. 8
2.5 CONNECTING A MOTORISED DOME CAMERA, AN ALARM OUTPUT OR A SENSOR .......... 9
2.6 REMOTE CONTROL ...................................................................................................................... 11
2.7 CONTROL VIA THE MOUSE......................................................................................................... 13
2.8 PLAYBACK MODE......................................................................................................................... 15
2.9 PTZ MODE ................................................................................................................................... 16
3 STANDARD OPERATION AND MENU SETUP ............................................................19
3.1 MAIN MENU19
3.2 RECORDING SETUP ..................................................................................................................... 20
3.3 EVENT SETUP ............................................................................................................................... 23
3.4 SCHEDULE SETUP ....................................................................................................................... 25
3.5 CAMERA SETUP ........................................................................................................................... 27
3.6 ACCOUNT SETUP ......................................................................................................................... 28
3.7 NETWORK SETUP ........................................................................................................................ 29
3.8 PTZ AND RS-485 SETUP .............................................................................................................. 33
3.9 SYSTEM SETUP ............................................................................................................................ 34
3.10 UTILITIES SETUP .......................................................................................................................... 39
3.11 DIAGNOSTICS ............................................................................................................................... 40
4. SEARCHING AND BACKING UP..................................................................................41
4.1 SEARCH ................................................................................................................................... 41
4.2 BACKUP ................................................................................................................................... 44
4.3 PLAYING EXPORTS ON A COMPUTER....................................................................................... 45
4.4 CONVERTING IRF FILES TO AVI FILES ...................................................................................... 47
5. REMOTE CONNECTION ...............................................................................................48
5.1 SOFTWARE INSTALLATION AND SETUP .................................................................................. 48
5.2 OPERATION OF THE SOFTWARE ............................................................................................... 50
6. MOBILE APPLICATION ................................................................................................51
6.1 INSTALLATION AND OPERATION WITH ANDROID ................................................................... 51
6.2 INSTALLATION AND OPERATION ON IPHONE/IPAD................................................................. 56
6.3 INSTALLATION AND OPERATION WITH WINDOWS MOBILE ................................................... 63
7. SPECIFICATIONS..........................................................................................................65
2

1. CONTENTS OF THE PACKAGING
1. Digital video recorder
2. Installation CD, Client Viewer
software
3. User Manual 4. Remote control
7. Batteries
6. Mains adaptor
5. Power supply cord
8. Female SUB-D (DB25)
connector
Safety instructions
This product should be installed in line with installation rules, preferably by a qualified electrician. Incorrect installation and use can lead to risk of electric shock or fire. Before carrying out the
installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained
and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
EN
3

2. CONTROLS AND LOCATIONS
2.1 4 305 53 FRONT PANEL
Control Description
1 ESC/BACKUP Exits the menu screen and the various functions.
Accesses the backup menu.
2 SEARCH
Accesses the search screen menu. Use the up/down keys to move
around the menu.
Press 17 (ENTER) to access the required item.
3 PIP
Enables “picture in picture” format. Use the up and down keys to move
around.
Press 17 (
) to access the required item.
4 ZOOM Enables or disables the zoom function.
Press 17 (ENTER) to change channel.
5 AUTO Enables sequential mode, as defined in the SPOT Setup.
6 REC INDICATOR Recording indicator.
7 POWER INDICATOR Indicates that the recorder is on.
8 USB 2.0 The USB 2.0 port can be used to connect a USB mouse or a USB
storage device.
9 REC Starts/stops a recording.
10 PLAY Starts playback.
11
MENU/PAUSE (
) Accesses menu mode Use the up and down keys to move around the
menu screen.
Pauses playback.
12 IR SENSOR IR sensor for signals from the remote control.
13 RIGHT DIR. KEY/FAST FORWARD
(
)
Right direction key.
Fast forward, speed: 2x, 4x, 8x, 16x, 32x, 64x.
14 UP DIR. KEY/SLOW FORWARD
(
)
Up direction key.
Slow forward, speed: 1/2x, 1/4x, 1/8x, 1/16x and frame by frame.
15 DOWN DIR. KEY/STOP
(
)
Down direction key.
Stops playback.
16 LEFT DIR. KEY/FAST REWIND
(
)
Left direction key.
Fast rewind, speed: 2x, 4x, 8x, 16x, 32x, 64x.
17 ENTER/MODE (
)Switches between full screen mode or division of the screen into 4
(quad screen).
Confirms a selection.
4

In direct view mode, keys 13 - 14 - 15 and 16 are used to set up the PIP screens and to enable the sound on the camera:
5

2.2 4 305 53 REAR PANEL
Item Description
1 VIDEO INPUTS 4 x BNC inputs. Connection of 4 analogue cameras.
2 VGA OUTPUT Output for a VGA monitor.
3 AUDIO INPUT RCA input for the audio signal.
4 RS485/RELAY/SENSOR Male SUB-D (DB25) connector, inputs and outputs for connecting PTZ
cameras, relays and alarms (see section 2.5 for the connections).
5 NETWORK CONNECTION Connection to the LAN, RJ45 connector.
6 POWER SUPPLY 12 VDC.
7 VIDEO/SPOT OUTPUT BNC output for an analogue monitor, for sequential display of the cameras
(in SPOT mode).
8 AUDIO OUTPUT RCA output for an audio signal.
9 USB USB port for connecting a peripheral (mouse, USB key, external hard
disk, etc.).
1VIDEO INPUT
2VGA OUTPUT 3AUDIO INPUT
4RS485/RELAY/
SENSOR
5NETWORK
CONNECTION
6POWER SUPPLY
7VIDEO/SPOT OUTPUT
8AUDIO OUTPUT
9 USB
1 RS485D- 9-13, 21-25
2Relay1_CM 14 RS485 D+
3GND 15 RELAY1_ND
4SENSOR2 16 RELAY1_NC
5SENSOR4 17 SENSOR1
6GND 18 SENSOR3
6

2.3 4 305 54 /4 305 55 FRONT PANEL
Control Description
1 CD/DVD recorder location Function not available.
2 IR SENSOR IR sensor for signals from the remote control.
3 EJECT Function not available.
4 USB 2.0 The USB 2.0 port can be used to connect a USB mouse or a USB
storage device.
5 Numeric keys Used to select a camera (use the "+10" key for cameras 10 to 16) and
for entering numbers.
6 LOCK Locks the keys on the front panel (ON/OFF).
7 PTZ Pan/Tilt/Zoom menu.
8 REC Starts/stops a recording.
9 INDICATOR LIGHTS
POWER: Indicates that the DVR is on.
LAN: Network indicator.
HDD: Playing from/writing to the hard disk.
10
LEFT DIR. KEY/FAST REWIND
(
)Left direction key.
Fast rewind, speed: 2x, 4x, 8x, 16x, 32x, 64x.
11 UP DIR. KEY/SLOW FORWARD
(
)
Up direction key.
Slow forward, speed: 1/2x, 1/4x, 1/8x, 1/16x.
12
RIGHT DIR. KEY/FAST FORWARD
(
)Right direction key.
Fast forward, speed: 2x, 4x, 8x, 16x, 32x, 64x.
13 DOWN DIR. KEY/STOP (
)Down direction key.
Stops playback.
14 PLAY Starts playback.
15 SEARCH Accesses the search screen menu. Use the up/down keys to move
around the menu.
16 ESC/BACKUP Exits the menu screen and the various functions.
Accesses the backup menu.
17 ENTER/MODE (
)Confirmation key. Displays all the cameras in full screen then in multi-
screen, in a loop.
18
MENU/PAUSE (
) Accesses menu mode.
Use the up and down keys to move around the menu screen
Pauses playback.
19 MUTE Enables the audio inputs or mute mode.
20 AUTO Enables sequential mode. Shows all cameras in loop mode.
21 FREEZE Freezes the frame (ON/OFF) in direct view mode.
22 ZOOM
Enables or disables the zoom function which doubles the size of the
image on the screen.
Press 17 (
) to change channel.
23 STATUS Displays the software version, the IP address, the MAC address and
the status of the hard disk (DIAGNOSTIC menu).
24 PIP Enables “picture in picture” format.
Use the up and down keys to move around.
25 MULTI CH1->...CH16->CH1-4->CH5-8->CH9-12->CH13-16->CH1-9->
CH8-16->CH1-13->CH1-16
In direct view mode, keys 13 - 14 - 15 and 16 are used to set up PIP screens (see image on page 5).
7

Item Description
1 VIDEO INPUTS 8x or 16x BNC inputs for connecting analogue cameras.
2 AUDIO INPUTS RCA inputs for the audio signal.
3 NETWORK CONNECTION Connection to the LAN, RJ45 connector.
4 VGA OUTPUT Output for a VGA monitor.
5 POWER SUPPLY 12 VDC input.
6 VIDEO/SPOT OUTPUT BNC output for an analogue monitor, for sequential display of cameras.
7 AUDIO OUTPUTS RCA outputs for an audio signal.
8 USB USB port for connecting a peripheral (mouse, external hard disk, USB key).
9 RS485/RELAY/SENSOR Male SUB-D (DB25) connector, inputs and outputs for connecting PTZ cameras,
relays and alarms (see section 2.5 for the connections).
10 ON/OFF button Electricity supply button.
11 NTSC/PAL NTSC/PAL switch. In Europe leave the switch in PAL position.
12 IR Connector for an IR sensor extension.
13 E-SATA Connector for an E-SATA external hard disk.
8-channel recorder
16-channel recorder
2.4 4 305 54 / 4 305 55 REAR PANEL
2AUDIO
INPUT
3NETWORK
CONNECTION 4VGA OUTPUT
5POWER
SUPPLY
6VIDEO/SPOT OUTPUT
8USB
OUTPUT
7AUDIO OUTPUT
9RS485/RELAY/
SENSOR
1CAMERA 1-8
1CAMERA 1-16
6VIDEO/SPOT OUTPUT
7AUDIO OUTPUT
8USB
OUTPUT
4VGA OUTPUT 3NETWORK
CONNECTION 9RS485/RELAY/
SENSOR
2AUDIO
INPUT BNTSC/PAL
AON/OFF BUTTON
5
POWER
SUPPLY
DE-SATA
CIR
8

2.5 CONNECTING A MOTORISED DOME CAMERA, AN ALARM OUTPUT OR A SENSOR
No. COLOUR 4 305 53 4 305 54 4 305 55 No. COLOUR 4 305 53 4 305 54 4 305 55
1. BROWN RS 485_B- 14. RED RS 485_D+
2. ORANGE RELAY1_COMMON 15. YELLOW RELAY 1 NO (2)
3. GREEN SENSORS_COMMON 16. BLUE RELAY 1 NC (3)
4. PURPLE SENSOR 2 17. GREY SENSOR 1
5. WHITE SENSOR 4 18. BLACK SENSOR 3
6. BROWN NA (1) SENSOR 6 SENSOR 6 19. RED NA (1) SENSOR 5 SENSOR 5
7. ORANGE NA (1) SENSOR 8 SENSOR 8 20. YELLOW NA (1) SENSOR 7 SENSOR 7
8. GREEN NA (1) NA (1) SENSOR 10 21. BLUE NA (1) NA (1) SENSOR 9
9. PURPLE NA (1) NA (1) SENSOR 10 22. GREY NA (1) NA (1) SENSOR 11
10. WHITE NA (1) NA (1) SENSOR 14 23. BLACK NA (1) NA (1) SENSOR 13
11 BROWN NA (1) NA (1) SENSOR 16 24. RED NA (1) NA (1) SENSOR 15
12. ORANGE NA (1) NA (1) RELAY 2
COMMON
25. YELLOW NA (1) NA (1) RELAY 2
NO (2)
13. GREEN NA (1) NA (1) RELAY 2
NC (3)
NA (1): Not applicable
NO (2): Normally open
NC (3): Normally closed
Relays AC DC
Maximum Switch Power 120 W 48 W
Maximum Switch Voltage 120 V 24 V
Maximum Switch Currency 1 A 2 A
Sub DB25 connector

Relay specifications
9

Connection for a PTZ camera
Connecting a device to the relay output
(example: relay 1NC)
Connecting a device to the sensor input
(example: sensor 1)
10