LEGRAND HPM Forta LFL0110WBL User manual

Forta LED Floodlight
Instruction Manual
Cat. No: LFL0110WBL, LFL0120WBL,
LFL0130WBL, LFL0140WBL
1Specification
Cat. No. LFL0110WBL LFL0120WBL LFL0130WBL LFL0140WBL
Nominal Input Voltage 230-240 V a.c 50 Hz
Input Power 11 W 23 W 32 W 43 W
Lumens Output 730 lm 1040 lm 2250 lm 3000 lm
Colour Temperature Cool White 4000K (Nominal)
Protection Class Class 1
Lens/Glass >2m (recommended)
IP Rating IP44
Dimensions 115 x 87
x 130 mm
180 x 140
x 135 mm
228 x 188
x 175 mm
228 x 188
x 175 mm
Weight (excl.packaging) 0.6 kg 0.9 kg 1.5 kg 1.6 kg
Power cord requirement H05RN-F 3G 1mm2(not included)
Fig 1
1Lamp Cover Screw
2Terminal Block
3Junction Box Cover Screws (x 4pcs)
4 Wall Mounting Bracket Screws (x 2pcs)
5 Wall Mounting Bracket
6Gland
7Power Cable (not included)
Read all the instructions before installation. This instruction manual is to be left at the installation site. These floodlights
must be installed by a licensed electrician.
Installation
Installing a wall switch adjacent to the power source is recommended.
1. Remove mounting bracket from the fitting and use to mark position on
the wall/ceiling.
2. Mount the bracket on the wall/ceiling. Ensure the method of fixing can
support up to a 10kg weight.
3. Reattach fitting to the bracket.* Do not tighten bolts completely
to allow for mains wiring termination.
* Ensure that cord gland faces downwards in the final mounting
position (as shown in Fig.1).
N
L
Fig 2
Blue wire to Neutral
Green-Yellow to Earth
Brown wire to Switch
White wire to Light
Green-Yellow to Light
White wire to Light
4. Choose rubber-sheathed 3-core circular cord, H05RN-F 3G 1mm2
(not supplied) for the mains wiring.
5. Remove junction box cover, strip insulation from cord and insert into
cord gland. Wire up as shown in Fig 2.
6. Replace junction box and tighten screws to ensure a weatherproof
seal. Tighten gland.
7. Orient fitting to desired position and tighten bolts completely.
7
65
4
3
2
12

08/2021 LE13194AA
Warranty
Legrand warrants this product for a period of 3 years from the date of purchase.
These goods come with guarantees that cannot be excluded under the Australian and New
Zealand Consumer Laws. You are entitled to a replacement or a refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
See the Warranty card enclosed with this product for further details.
Customer Service
For all Customer Service and Technical Support
please call Monday to Friday during business hours.
Legrand Australia
1300 369 777
www.hpm.com.au
Legrand New Zealand
0800 476 009
www.hpm.co.nz
ABN: 31 000 102 661
Paper
1. Installation is to be made in dry weather conditions.
2. Choose a wall mount position that is in a sheltered location
(e.g under the eaves of the house). A mounting height of greater
than 2m is recommended.
3. Do not operate in close proximity to combustible materials or
substances affected by heating or drying. Keep a minimum
distance of 0.5m from adjacent objects.
4
Where to mount your flood light Product Notes
1. This product must be installed and used as per these
instructions.
2. This product contains no serviceable parts and no attempt
should be made to repair this product. If the product is faulty it
should be discarded.
3. This product has been designed to operate in ambient
temperatures -10°C to +40°C.
4. This product is not suitable for use in hazardous environments
and/or corrosive areas.
5. An IP rating of IP44 is generally considered suitable for
external walls with supplementary protection such as
overhanging eaves.
6. The material in this product may vary in colour from batch to
batch. Colour matching from one batch to another cannot be
guaranteed.
7. Extended exposure to UV rays (such as exposure to direct
sunlight) may cause discolouration of this product.
8. This product is not suitable for marine environments such as
areas subject to salt spray and/or mist.
9. This product utilises intellectual property in the form of
registered designs, trademarks, and/or patents. Such
intellectual property remains the property of Legrand in all
cases.
10. Legrand reserves the right to modify the specification of this
product at any time.
3