Description of extension
settings
•Device information - Basic information about the device and its owner
•Tap-to-Run and Automation - View scenes and automations assigned to the
device. Creation of scenes is possible directly in the main menu of the
application in the section
"Scenes". For H4053, this could be for example an automation where a
lower sensitivity of motion detection would be set between 18:00 and 7:00.
•Basic Function Settings - Enable/disable basic control functions such as
automatic screen rotation or watermarking with time and date display.
Another important setting is the ability to select one-way or two-way
communication.
•IR Night Vision - Night mode setting.
•Detection Alarm Settings - Alarm settings.
•Activity Area - Set the zone in which the camera captures motion. For
example, if your camera is sensing a road you don't want the camera to
alert you to every car that passes by, so this feature allows you to select the
area that will be sensed by the motion sensor.
•Human Body Filtering - Human Body Contour
Recognition. When you turn this feature on, the
device should not alert you to every movement,
but only when it recognizes the human body.
•PIR set - Switching on/off the motion sensor
and setting its sensitivity.
•Power Management Settings - Displays the
current battery status, power source, and
notifies you if the battery drops below a
specified percentage.
•Offline Notification - To avoid constant
reminders, a notification will be sent if the
device remains offline for more than 30 minutes
•Cloud Storage - Cloud storage settings. The cloud is not included in the box,
but can be purchased additionally through the app.
•Offline Notification - To avoid constant reminders, a notification will be sent
if the device remains offline for more than 30 minutes.
•FAQ & Feedback - View the most common questions along with their
solutions plus the ability to send a question/suggestion/feedback directly to
us
•Share Device - Share device management to another user
•Add to Home Screen - Add an icon to your phone's home screen. With this
step, you don't have to open your device through the app every time, but
just click directly on this added icon and it will take you straight to the
camera view
•Device update - Device update. Option to enable automatic updates
•Remove Device - Remove and evaporate the device. An important step if
you wish to change the owner of the device. After adding the device to the
app, the device is paired and cannot be added under another account.
