LEITZ ICON User manual

Quick Start Guide for Mac
1
Unpacking the Leitz Icon Printer
Check that the items below are included in your printer package. If any of these items are missing
or damaged, visit www.leitz.com/icon to contact Customer Support.
Getting to Know the Printer
Installing the Software
Software installation must be complete before connecting the printer to your computer.
Installing the Software
1. Download the latest version of the Leitz Icon Software from the Leitz website at
www.leitz.com/icon.
2. Open the Downloads folder on your computer and double-click the Leitz Icon Software
installer file.
3. In the dialog box that appears, double-click to start the installer.
4. Follow the on-screen instructions to install the software.
Connecting the Power
The printer is powered using the included AC power adapter and power cord.
1. Plug the power cord into the power
adapter.
2. Plug the power adapter into the power
connector on the back of the printer.
3. Plug the power cord into an available
power outlet.
An optional, external, rechargeable battery
is available for using the printer as a
portable device. Refer to the Leitz Icon
Printer User Guide (available at
www.leitz.com/icon) for information on
using the optional battery.
ALeitz Icon printer DCleaning card GUSB cable
BStarter label cartridge EPower adapter
CWarranty leaflet FPower cord
AFeed button EWireless status light IBattery connector
BCutter button FLabel exit slot JUSB connector
CCartridge door button GLabel guide latch/platen release KPower connector
DPower status light HLabel compartment LWi-Fi Protected Setup (WPS) button
A
D
B
C
E
F
G
B
A
E
F
H
G
D
C
JK
I
L

2
Connecting the Printer to Your Computer
You can connect your printer to your computer wirelessly or using the included USB cable. See the
following sections for details:
•Setting Up the Printer Using USB
•Setting Up the Printer for Wireless Use
Setting Up the Printer Using USB
After downloading and installing the software, connect the power to the printer (see Connecting
the Power) and attach the USB cable to your computer.
1. Plug the USB cable into the USB connector located on
the back of the printer.
2. Plug the other end of the USB cable into an available USB
port on your computer.
The necessary driver to print to your printer is installed.
Once the installation is complete, you will be able to print
your first label.
Next, see Getting to Know the Label Cartridge to learn more about the Leitz Icon Intelligent
Label Cartridges.
Setting Up the Printer for Wireless Use
In order to use your printer via a wireless connection, the following two discrete steps are required:
1. Connect the printer to your network.
2. Add the printer to your computer and install the printer driver.
On initial setup, and later, in the absence of a recognized network, your printer will switch to what is
known as "Soft AP" mode, where the printer creates it's own Wi-Fi network for wireless printing.
When connecting your printer to an existing network, you will use Soft AP mode to connect to the
printer and select the home or office network to which you want the printer to be attached. Later, if
you move the printer to another location where the network is not available, the printer will switch
back to Soft AP mode so you can connect to it and print using its own broadcast network.
Connecting the Printer to Your Network
1. On your computer, search for available wireless networks.
For information on searching for wireless networks, see the documentation for your computer.
2. From the list of available networks, select your Printer ID.
The Printer ID is formatted as ICON-xxyyzz and can be found on the label on the bottom of
your printer.
3. Once connected, start a web browser on your computer.
4. In the address bar, type 192.168.1.1 and then press Enter.
5. Enter your user name and password in the User name and Password boxes.
The default user name and password are as follows.
User name: admin
Password: password
You can change this user name and password at any time; see the Leitz Icon Printer User
Guide for more information.
6. Click OK.
The Leitz Icon Control Panel is displayed.
7. Click Wi-Fi Setup Wizard.
8. Click Connect to Existing Network.
The Select Your Wireless Network page is displayed.
9. Select your wireless network in the Available Networks list.
10.If prompted, enter your network password and then click OK.
11.Click Next.
The Connection Settings page is displayed with the most common, default setting selected.
12.Unless you are performing an advanced installation needing a specific static IP address,
click Next to use the default settings.
13.On the Confirm & Connect page, click Connect.
As the printer connects to the selected network, you may hear a noise as the printer resets. At
the same time, the wireless connection from your computer to the printer is dropped and you
will need to reconnect your computer to your wireless network.
14.Close the Leitz Icon Control Panel.
NOTE Software installation must be complete before connecting the printer to your computer.
NOTE If the label on the bottom of your printer does not contain the Printer ID, you can determine the
Printer ID using the printer’s MAC address. In this case, the Printer ID is formatted as ICON-
xxyyzz, where xxyyzz is the last six characters of your printer’s MAC address (found on the label
on the bottom of your printer). For example, if your printer’s MAC address is
MAC:00:1E:CO:13:13:A5, the Printer ID is ICON-1313A5.

3
Adding the Printer to Your Computer
This section describes how to add the printer and install the printer driver.
1. Start System Preferences, and then click Printers & Scanners.
2. Under the Printers list, click +and then click Add Printer or Scanner.
The Add dialog box appears.
3. Click Leitz Icon in the list of available devices.
The Kind column should display Bonjour.
4. In the Use list, do one of the following:
•Select Leitz Icon.
•If Leitz Icon does not appear in the list, do the following:
a. Click Select Software.
b. In the Printer Software dialog box, click Leitz Icon.
c. Click OK.
5. (Optional) In the Name box, type a useful, recognisable name for the printer such as Matt’s
Leitz Icon.
6. (Optional) In the Location box, type the location of the printer.
7. Click Add.
The printer is added to the Printers list and is now available for printing.
Getting to Know the Label Cartridge
Leitz Icon Intelligent Label Cartridges are easy to load into the printer and are recyclable*. Each
cartridge has a folding label guide that opens to load and print labels and closes to protect labels
during storage. The Intelligent Label Cartridge uses a special cartridge identification chip to relay
information about the label cartridge, such as the type and size of the labels, the capacity of the
label cartridge, and the number of labels remaining, to the software.
*Intelligent Label Cartridges may not be recyclable in your area.
NOTE If more than one Leitz Icon version appears in the list, select the most recent version.
AFolding label guide BLabel exit slot CCartridge identification chip
NOTE Avoid handling the cartridge identification chip as this may damage the chip. If the chip becomes
damaged, the label cartridge may not work properly.
A
B
C

4
Loading Labels Getting to Know Leitz Icon Software
For details on all of the Leitz Icon Software features, click Help.
Printing Labels
Using the Leitz Icon printer, you can print a wide variety of adhesive labels as well as non-adhesive
name badges, notes, and appointment cards.
This section describes how to print a basic Address label. For detailed information about printing
other types of labels, refer to the Leitz Icon Software Help (available from the Help menu).
1. Click to start Leitz Icon Software.
2. Click Address on the label selection pane.
The label selection pane expands to display the available types of Address labels.
3. Click Address Label.
The label selection pane expands to display the available Address label templates.
4. Click Address Label.
The label selection pane collapses and an Address label is displayed.
5. Click once on the displayed label to edit the text.
6. Type an address or other text on the label.
7. If desired, use the formatting pane to change the text formatting.
8. Click Print to print the label.
Additional Information
Visit the Leitz website at www.leitz.com/icon for additional information, including the latest
software, firmware, user guides, news, and FAQs.
ASelect a printer DLock/unlock label design GCreate a custom Address Book
or use your Mac Contacts
B
Add addresses, text, counters,
the date and time, barcodes,
shapes, or images
EFormat objects and customize
object properties HZoom the displayed label
CSelect the label category, type,
and template FEdit the label IPrint a label
C
B
H
E
G
A
F
D
I
Copyright
© 2014 Esselte IPR AB. All rights reserved.
Leitz, Leitz Icon, Smart Labeling System, Intelligent Label Cartridge are trademarks of Esselte IPR AB or its affiliates.
Mac and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under
license to Apple.
The DYMO and DYMO Label trademarks are registered trademarks of Sanford, LP. Esselte is not affiliated with,
endorsed, or sponsored by Sanford, LP.
Revised 10/2014
1. Push the button on the top of the printer to
open the cartridge door.
2. Lift the label guide latch as shown.
3. Pull open the folding label guide on the
label cartridge until it locks into place.
4. Place the cartridge into the printer as
shown. Make sure the cartridge is
centered and seated securely in the
printer.
5. Lower the label guide latch.
6. Close the cartridge door.
The printer automatically feeds the labels
to the starting position.
NOTE Avoid handling the cartridge
identification chip as this may
damage the chip. If the chip becomes
damaged, the label cartridge may not
work properly.