LEKUS HitFit Neo User manual

HitFit Neo - English

Please read the manual before use.
The information in this document won't be modified or
extended in accordance with any notice.
The watch should be charging 2 hours at least before use.
1. Caution:
1.1 Waterproof and dustproof
The watch supports waterproof and dustproof. Please follow below
guidelines to maintain the waterproof and dustproof function.
Otherwise your device might be damaged.
· Do not use watch under the strong pressure water.
· Do not use watch when diving, snorkeling or other sports in
turbulent water.
· Please dry your hands or watch fully before operating.
· If the watch is exposed to water, please dry it fully with soft cloth. If
it is exposed to other liquids (such as salt water, pool water, soapy
water, oil, perfume, sunscreen, hand sanitizer) or chemicals (such as
cosmetics), please wash it with clean water and dry it fully with soft
cloth. Do not follow these instructions may damage its performance
and appearance.

· If the watch is dropped or hit, the waterproof and dustproof
function may be damaged.
· Do not disassemble your watch. The waterproof and dustproof
function may be damaged.
· Do not use watch in extremely high or low temperature
environments.
· Do not use blowers and other heated equipment to dry the watch.
· In sauna room, the waterproof function may be damaged.
1.2 Cleaning and management of HitFit Neo
Follow the below points to ensure that HitFit Neo is operating
normally and looks good. Otherwise, maybe damage HitFit Neo and
cause skin irritation.
· Protect watch from dust, sweat, ink, oil and chemical products (such
as cosmetics, antibacterial sprays, hand sanitizers, detergents, and
insecticides). Otherwise, the internal and external parts may be
damaged or causes performance degradation. If HitFit Neo is stained
with above substances, please clean it with lint-free soft cloth.
· When cleaning HitFit Neo, do not use soap, detergent, abrasive
materials, compressed air, ultrasonic waves or external heat sources.
Otherwise, HitFit Neo may be damaged. Soap, detergent, hand
sanitizer, or detergent residue may cause skin irritation.

· After exercising or sweating, please clean your wrist and strap. Use
water to clean HitFit Neo and dip a small amount of alcohol to wipe,
then dry it thoroughly.
· If HitFit Neo is stained or infiltrated with other objects, please use
wet soft toothbrush to clean it.
1.3 If you are allergic to material on HitFit Neo, please
pay attention when using
· Manufacturer conducted testing about hazardous materials on HitFit
Neo by internal and external certification agency, including testing of
all materials contact skin, skin toxicity testing, and wearing testing.
· HitFit Neo contains nickel. If your skin is very sensitive or you are
allergic to the materials on HitFit Neo, please take necessary
precautions.
– Nickel: HitFit Neo contains a small amount of nickel. The content is
lower than the reference value of European REACH regulations. You
will not be exposed to the nickel in HitFit Neo and our device has
passed the international certification test. However, if you are allergic
to nickel, please use HitFit Neo with caution.
· All materials used on HitFit Neo comply with relevant inspection
standards such as REACH and RoHS.

2. Product specification
Model HitFit Neo
CPU RTL8762D
ARM Cortex-M0 53MHz
Memory RAM 128KB + ROM 128Mb
Full touch screen
1.7” IPS
240*280 big screen
2.5D glass
Bluetooth version 5.0
Battery Lithium-ion 3.7V/240mAh
Function
IP68 waterproof, 24h Body Temperature, Heart
Rate, Sleep, Daily activity, sports tracking,
female care, stylish Dials Push, DIY favorite dial
customized, 7 days weather forecat, Notification
(Ins/Facebook/Skype/Whatsapp ect),
2 operations styles choose
Other features
alarm clock, Do not disturb mode, battery saving
mode, show time setting, multi-languages
supported, changeable strap

3.Product details
3.1 Charge your watch
Connect and charge the watch according to the picture. It needs to be
charged to activate the watch when it is started for the first time.
3.2 Operate your watch
(1) Power on: When the watch is Off status, press and hold the power
key for 5 seconds to turn it on. The home screen of the watch will be
displayed after booting.
(2) Touch screen operation: From the home screen, swipe to the right
to the menu screen, then tap the function icon to enter the
corresponding sub-menu.

(3) Wake up screen: When the watch screen is Off status, you can
press the power key to wake up the screen. If the gesture control
button is turned on in the APP, you can also wake up the screen by
turning the wrist.
(4) Shutdown: Click the Setting icon, click System - Shut down, click
to shut down.
3.3 Replace the strap
Remove the strap from the watch by sliding the snap lock on the
strap.
4. Products quick into
4.1 Products quick into
(1) Long press the main interface to enter the home page thumbnail.
You can view it left and right, click touch to switch the home page.
(2) Swipe to the right: Display function list -> Daily activity, Sports,
Sports record, Temperature, ect.. Swipe up and down to navigate the
Snap lock

list, and tap a function to select.
(3) Swipe down: Display Battery, Bluetooth, Timer, and shortcut icons.
(4) Swipe up: Storage information.
(5) Swipe to the left: Display the static icon list, click to enter the
corresponding function, right stroke to return to the previous level.
Setting Menu style method:
You can choose the Menu style from menu Setting > Choose style:
List or Smart.

4.2 Clock Display
Setting dial watch method:
When the watch in clock mode, please long press on the middle
screen and set different clock interfaces if you like.
5.Product quick use
5.1 Download and install App
You can set up the watch through the " HitFit Pro " App for iOS or
Android devices. You need download and install the " HitFit Pro " App
from APP Store or Google Play Store:
5.2 Connection and Synchronize data
5.2.1 Bluetooth connection

Notice:
Wrong operation: Pair the watch directly with the Bluetooth in your
mobile phone’s settings.
Please don’t shut the Bluetooth notify service when you are clearing
software by background or close background application software. It
will affect the sync function between watch and phone if shut it.
5.3 Basic functions
5.3.1 Daily activity
The watch will display the user's total number of steps on the day,
walking distance, calories burned on the same day, and the data will
be cleared at 0 o'clock (midnight) every day.
5.3.2 Sports
In sports mode: the single-point function icon allows you to enter
sports modes such as Walking, Running, Climbing, Riding, Basketball,
Yoga, Elliptical, Treadmill and Fitness.
5.3.3 Sports record
If you have done any sports and saved, in this function will show the
information of sports record.
5.3.4 Temperature

(1) Function introduction: The watch will measure the user's
temperature under the temperature measurement interface. After
the test is completed, the vibration will display the result.
(2) Operating instructions: Swipe to the left on the main interface and
click the temperature static icon to switch to the temperature
measurement interface. Once the interface is entered, the
measurement will start. The left data is for Body surface temperature,
it is changed in real time. The right data is for Body temperature,
measuring 60s to complete the measurement. During the
measurement, the interface value will be show “ --°”. After the
measurement is completed, the value will be displayed.
Remark: During testing body temperature, environment temperature
requires within 18-30°C.
5.3.5 Heart rate
(1) Function introduction: The watch will measure the user's heart
rate under the heart rate measurement interface. After the test is
completed, the vibration will display the result. After no operation,
the screen will automatically go out.

(2) Operating instructions: Swipe to the left on the main interface and
click the heart rate static icon to switch to the heart rate
measurement interface. Once the interface is entered, the
measurement will start. During the measurement, the interface value
will be zero. After the measurement is completed, the value will be
displayed.
5.3.6 Sleep
(1) Function introduction: The watch will display the user's sleep time
the night before. (Sleep measurement time 21:30 - 12:00 next day)
(2) Operation instructions: Swipe the main interface left and right,
click sleep to switch to the sleep interface, you can view the sleep
time of the previous day.
5.3.7 Message

When connected to Bluetooth, notifications from your phone will be
sent to your watch. (You need to open the push switch in the app in
advance)
5.3.8 Weather
After connected with APP, the watch will show local weather
information.
5.3.9 Relax
Adjust your breathing and relax.
5.3.10 Alarm clock
When you set alarm clock in the APP, the watch will show the alarm
clock information, and you also can open or close it in the watch.
5.3.11 Timer
Click to start timing. During the timing, you can start/pause/reset
switching with a single touch.
5.3.12 Countdown
You can choose 1min, 3min, 5min, 10min, 20min, 30min, 1H, 2H, or
set any time you want to use countdown function. You can

pause/start switching with a single touch.
5.3.13 Music
After connected with the Bluetooth, you can manipulate Mobile to
play music and adjust the volume, voice will come out from mobile
phone.
5.3.14 Female care
After you set the menstruation in the APP, and open reminder, the
watch will display relevant information simultaneously.
5.3.15 Find phone
When you connect your phone, the phone vibrates and rings when
you click the Find Phone icon.
5.3.16 Setting
Screen display: Including Brightness,Screen time,Turn
wrist wake,Change dial, Always on setting.
Choose style: Choose menu style for List or Smart.
Battery: Show the battery power, set Power saving mode .
Vibration: Set vibration intensity.
Do not disturb: Set enter or exit do not disturb mode.
System: Including Language, System version,Shut down,
Reset settings.

6. Caveat
Please follow the doctor's instructions and measure the results of
self-diagnosis and treatment. Users with blood circulation disorders
and blood diseases should be treated under the guidance of a doctor.
The measurement results of this product are for reference only and
are not intended for any medical use or basis.

HitFit Neo – Español

Lea el manual antes de uso.
La información de este documento no se modificará ni
ampliará de acuerdo con ningún aviso.
El reloj debe cargarse 2 horas como mínimo antes de su uso.
1. Precaución:
1.1 Resistente al agua y al polvo
El reloj es resistente al agua y al polvo. Siga las siguientes pautas para
mantener la función impermeable y a prueba de polvo.
De lo contrario, su dispositivo podría resultar dañado.
· No utilice el reloj bajo agua a presión fuerte.
· No utilice el reloj al bucear, hacer buceo u otros deportes en aguas
turbulentas.
· Seque sus manos o mire completamente antes de operar.
· Si el reloj está expuesto al agua, séquelo completamente con un
paño suave. Si está expuesto a otros líquidos (como agua salada, agua
de piscina, agua con jabón, aceite, perfume, protector solar,
desinfectante de manos) o productos químicos (como cosméticos),
lávelo con agua limpia y séquelo completamente con un paño suave.
No seguir estas instrucciones puede dañar su rendimiento y
apariencia.
· Si el reloj se cae o se golpea, la función resistente al agua y al polvo
puede dañarse.

· No desmonte su reloj. La función resistente al agua y al polvo puede
resultar dañada.
· No utilice el reloj en entornos con temperaturas extremadamente
altas o bajas.
· No utilice sopladores ni otros equipos calientes para secar el reloj..
· En la sala de sauna, la función impermeable puede dañarse.
1.2 Limpieza y manejo de HitFit Neo
· Siga los puntos a continuación para asegurarse de que HitFit Neo
esté funcionando normalmente y se vea bien. De lo contrario, puede
dañar el HitFit Neo y causar irritación de la piel.
· Proteja el reloj del polvo, el sudor, la tinta, el aceite y los productos
químicos (como cosméticos, aerosoles antibacterianos,
desinfectantes para manos, detergentes e insecticidas). De lo
contrario, las partes internas y externas pueden dañarse o provocar
una degradación del rendimiento. Si HitFit Neo está manchado con
las sustancias anteriores, límpielo con un paño suave sin pelusa.
· Al limpiar HitFit Neo, no utilice jabón, detergente, materiales
abrasivos, aire comprimido, ondas ultrasónicas o fuentes de calor
externas. De lo contrario, HitFit Neo puede resultar dañado. Los
residuos de jabón, detergente, desinfectante de manos o detergente
pueden causar irritación de la piel.