LENCO DAR-061BK User manual

1
Model: DAR-061
USER MANUAL
DAB+/FM radio with CD player and Bluetooth
HANDLEIDING
DAB+/FM-radio met CD-speler en Bluetooth
BEDIENUNGSANLEITUNG
DAB+/FM-Radio mit CD-Player und Bluetooth
MODE D’EMPLOI
Radio DAB+/FM avec lecteur CD et Bluetooth
MANUAL DEL USUARIO
Radio DAB+/FM con reproductor de CD y Bluetooth
BRUGERVEJLEDNING
DAB+/FM-radio med CD-afspiller og Bluetooth
BRUKSANVISNING
DAB+/FM-radio med CD-spelare och Bluetooth

2
Index:
English.............................................................................................................................3
Nederlands.................................................................................................................... 18
Deutsch ......................................................................................................................... 34
Français......................................................................................................................... 51
Español.......................................................................................................................... 67
Dansk/Norsk.................................................................................................................. 83
Svenska ......................................................................................................................... 99
Version: 2.0

3
English
DAR-061
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When placing the device on a shelf,
leave
5 cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and
other heat-generating products or naked flame. The device can only be used in
moderate climates. Extremely cold or warm environments should be avoided. Working
temperature between 0° and 35°C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and
restart the device following the instruction manual. During file transmission, please
handle with care and operate in a static-free environment.
6. Warning! Never insert an object into the product through the vents or openings. High
voltage flows through the product and inserting an object can cause electric shock
and/or short circuit internal parts. For the same reason, do not spill water or liquid on
the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near
swimming pools.
8. The device shall not be exposed to dripping or splashing and make sure that no objects
filled with liquids, such as vases, are placed on or near the apparatus.
9. Do not use this device when condensation may occur. When the unit is used in a warm
wet room with damp, water droplets or condensation may occur inside the unit and
the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours
before turning on the power: the unit should be dry before getting any power.
10. Although this device is manufactured with the utmost care and checked several times
before leaving the factory, it is still possible that problems may occur, as with all
electrical appliances. If you notice smoke, an excessive build-up of heat or any other
unexpected phenomena, you should disconnect the plug from the main power socket
immediately.
11. This device must operate on a power source as specified on the specification label. If
you are not sure of the type of power supply used in your home, consult your dealer or
local power company.
12. Keep away from animals. Some animals enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.
To remove severe stains, you may use a damp cloth with dilute detergent.
14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
15. Do not interrupt the connection when the device is formatting or transferring files.
Otherwise, data may be corrupted or lost.
16. If the unit has USB playback function, the USB memory stick should be plugged into the
unit directly. Don’t use an USB extension cable because it can cause interference
resulting in failing of data.
17. The rating label has been marked on the bottom or back panel of the device.
18. This device is not intended for use by people (including children) with physical, sensory
or mental disabilities, or a lack of experience and knowledge, unless they’re under

4
supervision or have received instructions about the correct use of the device by the
person who is responsible for their safety.
19. This product is intended for non professional use only and not for commercial or
industrial use.
20. Make sure the unit is adjusted to a stable position. Damage caused by using this
product in an unstable position vibrations or shocks or by failure to follow any other
warning or precaution contained within this user manual will not be covered by
warranty.
21. Never remove the casing of this device.
22. Never place this device on other electrical equipment.
23. Do not allow children access to plastic bags.
24. Only use attachments/accessories specified by the manufacturer.
25. Refer all servicing to qualified service personnel. Servicing is required when the device
has been damaged in any way, such as the power supply cord or the plug, when liquid
has been spilled or objects have fallen into the device, when the device has been
exposed to rain or moisture, does not operate normally, or has been dropped.
26. Long exposure to loud sounds from personal music players may lead to temporary or
permanent hearing loss.
27. If the product is delivered with power cable or AC power adaptor:
⚫If any trouble occur, disconnect the AC power cord and refer servicing to qualified
personnel.
⚫Don’t step on or pinch the power adaptor. Be very careful, particularly near the
plugs and the cable’s exit point. Do not place heavy items on the power adaptor,
which may damage it. Keep the entire device out of children’s reach! When
playing with the power cable, they can seriously injure themselves.
⚫Unplug this device during lightning storms or when unused for a long period.
⚫The socket outlet must be installed near the equipment and must be easily
accessible.
⚫Do not overload ac outlets or extension cords. Overloading can cause fire or
electric shock.
⚫Devices with class 1 construction should be connected to a main socket outlet
with a protective earthed connection.
⚫Devices with class 2 construction do not require a earthed connection.
⚫Always hold the plug when pulling it out of the main supply socket. Do not pull
the power cord. This can cause a short circuit.
⚫Do not use a damaged power cord or plug or a loose outlet. Doing so may result
in fire or electric shock.
28. If the product contains or is delivered with a remote control containing coin/cell
batteries:
Warning:
⚫“Do not ingest battery, Chemical Burn Hazard” or equivalent working.
⚫[The remote control supplied with] This product contains a coin/button cell
battery. If the battery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death.
⚫Keep new and used batteries away from children.
⚫If the battery compartment does not close securely, stop using the product and
keep it away from children.
⚫If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
29. Caution about the use of Batteries:
⚫Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
⚫Battery cannot be subjected to high or low extreme temperatures, low air
pressure at high altitude during use, storage or transportation.
⚫Replacement of a battery with an incorrect type that can result in an explosion or
the leakage of flammable liquid or gas.

5
⚫Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of
a battery, that can result in an explosion.
⚫Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or that leakage of flammable liquid or gas.
⚫A battery subjected to extremely low air pressure that may result in an explosion
or the leakage of flammable liquid or gas.
⚫Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
•Unpack all parts and remove protective material.
•Do not connect the unit to the mains before checking the mains voltage and before all
other connections have been made.
WARNING
Class 1 Laser Product
Warning: Do not touch the lens.
FRONT VIEW
1. Remote Control Receiver
2. TFT LCD Display
3. Power/Mode/Volume
7. Scan/Pause/play Button
8. Eject Button
9. Next Button

6
4. Menu Button
5. Prev Button
6. Preset Button
10.Up/Down/Stop/OK Button
11.CD door
12.Speaker
REAR VIEW
12. Inverter tube
14. Earphone/Aux in/DC in jack
13. Telescopic Antenna
15. Inverter tube

7
REMOTE CONTROL
1. Standby button
2. Speaker mute ON/OFF
3. Menu-Main menu and Info
4. Preset-saved stations,Favorites,etc
5. Scan-DAB/FM scan
6. Eject button
7. Go back one track
8. Play/Pause
9. Go forward one track
10. Stop play button
11. Mode button
12. EQ-Set tone
13. Up cursor button
14. Left cursor button
15. Enter Confirm selection
16. Right Cursor button
17. Down cursor button
18. V- Decrease volume
19. V+ Increase volume
20. 0.....9 Call up favorites/Memory; input
letters and numbers
21. Prog for USB/CD
22. Rep. for USB/CD

8
1. Getting stared
BATTERY INSTALLATION (REMOTE CONTROL)
1: Connect the DC mains plug to the DC mains input socket on the rear of the unit.
2: Connect the plug to a mains outlet and switch on.
Battery installation (Batteries not included):
1. Press the tab on the battery door and lift it off.
2. Install two (2) x AAA size batteries into the battery compartment as the figure on right
and the polarity markings, inside the battery compartment.
3. Replace the battery door.
Battery Precautions:
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Beware to follow the correct polarity when installing the battery as indicated in the
battery compartment. A reversed battery may cause damage to the device.
3. Don’t throw batteries into a fire. They may explode or leak.
4. Clean the battery contacts and also those of the device prior to battery installation.
5. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
6. If the batteries in the device are consumed or the device is not to be used for a long
period of time, remove them.
7. Do not try to recharge the battery not intended to be recharged; it can overheat and
rupture.
2.1 The packaging box contains following items:
SYSTEM SETTINGS
Standby & power on mode
1: Press and hold the POWER/MODE button to put the system into ON or STANDBY mode.
The date and time are displayed during standby.
2: When in standby mode press the POWER/MODE to power on.

9
Set time and date
Should you need to set the time & date manually follow the below steps.
1. Press and hold the ‘Menu’ button (In Bluetooth/AUX in mode, you only need to press
the MENU button to enter the MENU settings), the screen will appear as below.
2. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired time setup, then press the OK knob on the unit or press the OK
button on remote control to continue.
3. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
set the digit to the correct date/time, then press the OK knob on the unit or press the
OK button on remote control to confirm.
Set Alarms
Should you need to set the Alarms manually follow the below steps.
1. Press and hold the ‘Menu’ button (In Bluetooth/AUX in mode, you only need to press
the MENU button to enter the MENU settings), the screen will appear as below.
1. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Alarm setup, then press the OK button on the unit or press the OK
button on remote control to continue.

10
2. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Alarm1 setup, then press the OK button on the unit or press the
OK button on remote control to set Alarm1.
3. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Enable setup, then press the OK button on the unit or press the OK
button on remote control to set Alarm mode(OFF, Daily, Once, Weekdays, Weekends)
4. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired time setup, then press the OK button on the unit or press the OK
button on remote control to set Alarm time, Turn the ‘Prev/Next’ knob on the unit or
press the button on remote control to set the digit to the correct time, then press
the OK button on the unit or press the OK button on remote control to confirm.
5. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Mode setup, then press the OK button on the unit or press the OK
button on remote control to set source of the Alarm, turn the ‘Prev/Next’ knob on the
unit or press the button on remote control to choose DAB/FM/Buzzer, then press
the OK button on the unit or press the OK button on remote control to confirm.
6. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Preset setup, then press the OK button on the unit or press the OK
button on remote control to set source of the DAB and FM, turn the ‘Prev/Next’ knob
on the unit or press the button on remote control to choose DAB/FM station.
Then press the OK button on the unit or press the OK button on remote control to
confirm.
7. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Volume setup, then press the OK button on the unit or press the
OK button on remote control to set alarm volume, turn the ‘Prev/Next’ knob on the unit
or press the button on remote control to adjusting volume, then press the OK
button on the unit or press the OK button on remote control to confirm.
8. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired saved setup, then press the OK button on the unit or press the OK
button on remote control to save.
Set sleep time
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Sleep setup, then press the OK button on the unit or press the OK
button on remote control to set sleep time, turn the ‘Prev/Next’ knob on the unit or press
the button on remote control to choose 15/30/45/60/90. Then press the OK button
on the unit or press the OK button on remote control to confirm.
Set EQ
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired EQ setup, then press the OK button on the unit or press the OK button
on remote control to set EQ mode. Turn the ‘Prev/Next’ knob on the unit or press the
button on remote control to choose NORMAL/CLASSIC/ROCK/POP/JAZZ/DANCE/MANUAL,

11
then press the OK button on the unit or press the OK button on remote control to confirm.
Set Backlight
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Backlight setup, then press the OK button on the unit or press the OK
button on remote control to set backlight. Turn the ‘Prev/Next’ knob on the unit or press
the button on remote control adjusting backlight, then press the OK button on the
unit or press the OK button on remote control to confirm.
Factory reset
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Factory reset setup, then press the OK button on the unit or press the
OK button on remote control to set Factory reset. Turn the ‘Prev/Next’knob on the unit or
press the button on remote control to choose the YES or NO, then press the OK
button on the unit or press the OK button on remote control to confirm.
Software version
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired software version, then press the OK button on the unit or press the OK
button on remote control to check the software version.
Set Language
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Language setup, then press the OK button on the unit or press the OK
button on remote control to set lauguage. Turn the ‘Prev/Next’ knob on the unit or press
the button on remote control to choose language, then press the OK button on the
unit or press the OK button on remote control to confirm.
Adjusting volume
Turn the Volume knob or V-/V+ button on the remote control to adjusting volume.
DAB Mode
Press the Power I Mode button to turn the radio on.
Note: If this is the first time you have turned the radio on it will automatically search for all
available DAB radio stations
Selecting DAB mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the ‘Prev/Next’ knob on the unit or press the
button on remote control to choose the DAB icon, or press the mode button on the remote
control, then press the OK button on the unit or press the OK button on remote control to
confirm.
Finding a DAB station
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to the
selected station.

12
Storing DAB station presets
It is possible to store up to 10 of your favourite DAB stations. This will enable you to access
your favorite stations quickly & easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold the PRESET button for 1 second. The LCD will then show "Preset"
2. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
choose the preset number from 1-10 you wish to use, then press the OK button on the
unit or press the OK button on remote control to store the preset.
Recalling DAB station presets
1. You can recall the preset stations list by pressing the PRESET button or button on
the remote control.
2. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
select the preset station, then press the OK button on the unit or press the OK button
on remote control to activate.
NOTE: If you choose a preset that hasn’t been allocated a station, then “Preset Empty” will
be displayed.
DAB quick scan
Press the button on the unit or scan button on the remote control to quick scan.
DAB manual tuning
You can use this option to manually tune DAB radio stations.
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Manual tuning setup, then press the OK button on the unit or press
the OK button on remote control to select the DAB frequency. Then press the OK button on
the unit or press the OK button on remote control to confirm.
Prune station
When your radio has performed multiple scans in different regions, you may find you that
you have stored stations that you can no longer receive. This function automatically
removes any stations that you cannot listen to.
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Prune station setup, then press the OK button on the unit or press the
OK button on remote control to select the YES or NO. Then press the OK button on the unit
or press the OK button on remote control to confirm.
DRC (Dynamic Range Control)
This causes the radio to reduce the dynamic range of the audio signal. The purpose of this it
to adapt the dynamic range of the audio signal when listening in a noisy environment.
Note: This feature is not available on all DAB stations.
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired DRC setup, then press the OK button on the unit or press the OK
button on remote control to select the Off/Low/High. Then press the OK button on the unit
or press the OK button on remote control to confirm.
Station list

13
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Station list setup, then press the OK button on the unit or press the OK
button on remote control to enter the DAB station list. Turn the ‘Prev/Next’ knob on the
unit or press the button on remote control to select the DAB station, then press the
OK button on the unit or press the OK button on remote control to confirm.
Full scan
Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
highlight the desired Full Scan setup, then press the OK button on the unit or press the OK
button on remote control to confirm.
FM Mode
Selecting FM mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the ‘Prev/Next’ knob on the unit or press the
button on remote control to choose the FM icon, or press the mode button on the remote
control, then press the OK button on the unit or press the OK button on remote control to
confirm.
Storing FM station presets
It is possible to store up to 10 of your favourite FM stations. This will enable you to access
your favorite stations quickly & easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold the PRESETbutton for 1 second. The LCD will then show "Preset"
2. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
choose the preset number from 1-10 you wish to use, then press the OK button on the
unit or press the OK button on remote control to store the preset.
Recalling FM station presets
1. You can recall the preset stations list by pressing the PRESET button or press the
button on the remote control.
2. Turn the ‘Prev/Next’ knob on the unit or press the button on remote control to
select the preset station, then press the OK button on the unit or press the OK button
on remote control to activate.
NOTE: If you choose a preset that hasn’t been allocated a station, then “Preset Empty” will
be displayed.
FM Scan
1. Press and hold either the buttons on the unit or on the remote control
to scan up or down the frequency range. When a station is found the scan will stop and
play the located station.
2. You can fine tune the frequency by pressing either the Prev or Next buttons or press the
on the remote control to advance 0.05 MHz with each press.
3. Press the scan button on the unit or scan button on the remote control to scan the
frequency range, when a station is found the scan will stop and play the located station.

14
BT Mode
Selecting bluetooth mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the ‘Prev/Next’ knob on the unit or press the mode
button on remote control to choose the Bluetooth mode, then press the OK button on the
unit to confirm.
Make sure that no other Bluetooth device is connected to the radio. “No Connection"will
appear on the display.
Activate Bluetooth mode on the device that you want to connect. Look for the radio on the
list of detected devices on the Bluetooth device (refer to the instruction manual of the
device). Once the devices have found each other, the radio will appear as “Lenco DAR-061”
on the Bluetooth device.
Select Lenco DAR-061 from the list. If you are required to enter a PIN code, enter 0000 (four
zeros). Certain devices may also require you to approve the connection.
Once the connection has been successful, “Connected” will appear on the display of the
radio.
Start playback on your Bluetooth device.
Press or button on the unit and remote control to skip between tracks on the
device.
Press button on the unit and remote control to pause or play.
CD Mode
Selecting CD mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the ‘Prev/Next’ knob on the unit or press the mode
button on remote control to choose the CD mode, then press the OK button on the unit to
confirm.
1. Open the CD door by pressing the button on the unit or Eject on the remote control.
2. Insert a CD disc into the CD compartment with the label side up.
3. Close the CD door by pressing the button on the unit or Eject on the remote control.
PLAY/PAUSE operation
1. Press button on the unit and remote control to start play
2. Press button on the unit and remote control during playback to pause temporarily.
3. Press button on the unit and remote control again to resume playback from the
point playback is interrupted.
or operation
1. Press the button on the unit and remote control to skip backward or forward
to the desired track.
2. Press and hold the button on the unit and remote control to search backward
or forward to the desired point of the playback or track.
Press button to stop playing.

15
Repeat operation
1. Press the Rep. button on the remote control to choose the Repeat 1 or repeat all etc.
2. Repeat 1 to repeat the current track(song). “ ” will display.
Repeat all to repeat all tracks(full CD). “ ” will be displayed.
Repeat Album (in MP3 disc) to repeat the whole Album. “ ” will be displayed.
Random to shuffle all track and play them in random order. “ ”will be displayed.
Intro to play the first 10 seconds of every track.
PROGRAMMING TRACKS
In CD/MP3 mode, press the button to stop, press Prog button on remote control to start
the memory function.
In CD disc: “P01” and 001 will display, press or to select the trakc you want to
memory.
Press Prog button on remote control to confirm. Repeat this operation can memorize 99
tracks.
Press the button to start playing the tracks in order programmed. Press the button
twice to cancel memorized tracks.
Aux Mode
Selecting Aux in mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the ‘Prev/Next’ knob on the unit or press the mode
button on remote control to choose the AUX IN, then press the OK button on the unit to
confirm.
1. Use a standard 3.5 mm stereo connector (not included) to connect the external device
to the“AUX-IN “jack on the back panel of the unit.
2. start playback of the external device
Technical Specifications
Connections
12VDC IN, 3.5mm AUX-IN, 3.5mm headphone-
out
Adaptor Input
AC 100-240V ~ 50/60Hz
Adaptor Output
12VDC/2.5A
Output power
Batteries in remote control (not
included)
2 x 10W RMS
2 x AAA
DAB Frequency
174.928 - 239.200 MHz
FM Frequency
87.5 - 108 MHz
Bluetooth Frequency:
2402 - 2480MHz
RF Power
<20 dBm
Power consumption (standby)
< 1W
Power consumption (network standby)
< 2W
Operating Temperature
0°C-35°C
Operating position
Horizontal

16
Unit dimensions
Weight
380 x 218 x 145mm
3.2KG
Power supply adaptor: (For EU only)
Manufacturer: SHENZHEN SHI GUANGKAIYUAN TECHNOLOGY., LTD
Model number: GKYPS0250120EU1
Use only the power supply listed in the user instructions.
Information
Value and and precision
Manufacturers name or trade mark, commercial
registration and address
SHENZHEN SHI GUANGKAIYUAN
TECHNOLOGY LTD.
91440300053998927W
2 floor, 41 TianSheng Road, TianLiao
village, GongMing Street,
Guangming, Shenzhen, Guangdong,
P.R. China
Model Identifier
GKYPS0250120EU1
Input voltage
100-240V
Input AC frequency
50/60Hz
Output voltage
12V
Output current
2.5A
Output Power
30W
Average active efficiency
86.95%
Efficiency at low load (10%)
80%
No load Power consumption
0.095W
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of
the instruction, specifications and pictures in this documentation may differ slightly from
your particular situation. All items described in this guide for illustration purposes only and
may not apply to particular situation. No legal right or entitlements may be obtained from
the description made in this manual.

17
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery
should not be disposed of as general household waste in Europe. To
ensure the correct waste treatment of the product and battery, please
dispose them in accordance to any applicable local laws of
requirement for disposal of electrical equipment or batteries. In so
doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of
electrical waste (Waste Electrical and Electronic Equipment Directive).
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type [Lenco DAR-061] is in compliance
with directive 2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address:
https://commaxx-certificates.com/doc/dar-061_doc.pdf
Type RF
Frequency range (MHz)
Power (dBm)
DAB
174-240
-
FM
87.5-108
-
Bluetooth
2402-2480
<6
Service
For more information and helpdesk support, please visit www.lenco.com
Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands.

18
Nederlands
DAR-061
LET OP:
Het gebruik van afstandsbedieningen of aanpassingen of de uitvoering van procedures die
niet in dit document zijn gespecificeerd, kan leiden tot gevaarlijke blootstelling aan straling.
VOORZORGSMAATREGELEN VOOR GEBRUIK
ONTHOUD DE VOLGENDE INSTRUCTIES:
1. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het apparaat op een schap
plaatst, dient u 5 cm (2”) vrije ruimte rondom het gehele apparaat te behouden.
2. Installeer het product volgens de meegeleverde gebruikershandleiding.
3. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verwarmingen,
kachels, kaarsen en andere hittegenererende producten of open vuur. Het apparaat
kan alleen worden gebruikt in een gematigd klimaat. Extreem koude of warme
omgevingen dienen te worden vermeden. Het bedrijfstemperatuurbereik ligt tussen
0 °C en 35 °C.
4. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.
5. Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het
apparaat in dit geval slechts te resetten en opnieuw op te starten volgens de
gebruikershandleiding. Wees voorzichtig tijdens bestandsoverdracht en gebruik het
product in een omgeving zonder statische interferentie.
6. Waarschuwing! Steek nooit een voorwerp via de ventilatie- of andere openingen in het
product. Er is hoogspanning in het product aanwezig en als u er een object insteekt,
kan dat een elektrische schok veroorzaken en/of kortsluiting in de interne onderdelen.
Mors om dezelfde reden geen water of vloeistof op het product.
7. Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende keukens of in
de buurt van zwembaden.
8. Het apparaat mag niet worden blootgesteld aan druppels en spetters en zorg ervoor
dat er geen met vloeistof gevulde voorwerpen, zoals vazen, op of in de buurt van het
apparaat worden geplaatst.
9. Gebruik dit apparaat niet wanneer condensatie kan optreden. Wanneer het apparaat
in een warme, natte ruimte wordt gebruikt, kunnen zich waterdruppels of condens
vormen in het apparaat en kan het apparaat niet goed functioneren. Laat het apparaat
1 of 2 uur uit staan voordat u het inschakelt: het apparaat dient droog te zijn voordat
deze stroom ontvangt.
10. Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende keren
geïnspecteerd is voordat het de fabriek verlaat, is het nog steeds mogelijk dat er
problemen optreden, zoals met alle elektrische apparaten. Als u rook, een overmatige
hitteontwikkeling of enig ander onverwacht verschijnsel opmerkt, moet u onmiddellijk
de stekker van het netsnoer uit het stopcontact halen.
11. Dit apparaat moet worden gebruikt met een voedingsbron zoals gespecificeerd op het
specificatielabel. Als u twijfelt over het type voeding dat gebruikt wordt in uw huis,
raadpleeg dan uw dealer of plaatselijk energiebedrijf.
12. Buiten bereik van dieren houden. Sommige dieren kauwen graag op voedingskabels.
13. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen
oplosmiddelen of op benzine gebaseerde vloeistoffen. U kunt een vochtig doekje met
verdund schoonmaakmiddel gebruiken om hardnekkige vlekken te verwijderen.
14. De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt
door storing, misbruik, modificatie van het apparaat of batterijvervanging.
15. Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden
overdraagt. De gegevens kunnen anders corrupt of verloren raken.

19
16. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick
rechtstreeks op het apparaat worden aangesloten. Gebruik geen USB-verlengkabel,
omdat die kan leiden tot storingen met foutieve gegevens als gevolg.
17. Het classificatielabel bevindt zich op de onderkant of het achterpaneel van het
apparaat.
18. Dit hulpmiddel is niet bedoeld voor gebruik door mensen (inclusief kinderen) met een
fysieke, zintuiglijke of mentale handicap, of een gebrek aan ervaring en kennis, tenzij zij
toezicht of instructies hebben gekregen over het juiste gebruik van het hulpmiddel
door een persoon die verantwoordelijk is voor hun veiligheid.
19. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel
of industrieel gebruik.
20. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld. Schade die
wordt veroorzaakt door het gebruik van dit product in een onstabiele positie, trillingen
of schokken of het niet opvolgen van de waarschuwingen of voorzorgsmaatregelen in
deze gebruikershandleiding wordt niet gedekt door de garantie.
21. Verwijder nooit de behuizing van dit apparaat.
22. Plaats dit apparaat nooit op andere elektrische apparatuur.
23. Geef kinderen geen gelegenheid in aanraking met plastic zakken te komen.
24. Gebruik uitsluitend uitbreidingen/accessoires gespecificeerd door de fabrikant.
25. Laat alle reparaties over aan gekwalificeerd onderhoudspersoneel. Onderhoud is nodig
als het apparaat is beschadigd, bijvoorbeeld als de voedingskabel of de stekker is
beschadigd, als er vloeistof op het apparaat is gemorst, als er voorwerpen in het
apparaat zijn gevallen, als het apparaat is blootgesteld aan regen of vocht, als het
apparaat niet normaal werkt of als het is gevallen.
26. Langdurige blootstelling aan harde geluiden van persoonlijke muziekspelers kan leiden
tot tijdelijk of permanent gehoorverlies.
27. Als het product wordt geleverd met voedingskabel of wisselstroomvoedingsadapter:
⚫Als er zich problemen voordoen, moet u de voedingskabel loskoppelen en het ter
onderhoud aanbieden aan gekwalificeerd personeel.
⚫Nooit op de voedingsadapter stappen of deze indrukken. Wees zeer voorzichtig,
vooral in het gebied rond de stekkers en de kabelaansluitingen. Plaats geen zware
voorwerpen op de voedingsadapter, om beschadiging ervan te voorkomen. Houd
het gehele apparaat buiten bereik van kinderen! Wanneer kinderen met de
voedingskabel spelen, kunnen zij ernstig letsel oplopen.
⚫Haal de stekker uit het stopcontact tijdens onweer of wanneer u deze langere tijd
niet gebruikt.
⚫Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd en
eenvoudig te bereiken zijn.
⚫Laat AC-stopcontacten of verlengsnoeren nooit overbelast raken. Overbelasting
kan brand of een elektrische schok veroorzaken.
⚫Apparaten met een Klasse 1 structuur dienen te worden aangesloten op een
stopcontact met een beschermende aardverbinding.
⚫Apparaten met een Klasse 2 structuur vereisen geen aardverbinding.
⚫Houd altijd de stekker vast wanneer u deze uit het stopcontact trekt. Trek nooit
aan de voedingskabel. Dit kan tot een kortsluiting leiden.
⚫Gebruik nooit een beschadigde voedingskabel of stekker of een los stopcontact.
Dit vormt namelijk een risico op brand of elektrische schokken.
28. Indien het product knoopcelbatterijen bevat of wordt geleverd met een
afstandsbediening die knoopcelbatterijen bevat:
Waarschuwing:
⚫“Batterij niet inslikken, chemisch brandgevaar” of gelijkwaardige werking.
⚫De meegeleverde afstandsbediening bevat een knoopcelbatterij. Als de batterij
wordt ingeslikt, kan deze in slechts 2 uur ernstige interne brandwonden
veroorzaken en tot de dood leiden.
⚫Houd nieuwe en gebruikte batterijen buiten bereik van kinderen.

20
⚫Als de batterijhouder niet goed kan worden gesloten, dient u het product niet
meer te gebruiken en buiten bereik van kinderen te houden.
⚫Als u denkt dat batterijen zijn ingeslikt of binnenin een willekeurig lichaamsdeel
terecht zijn gekomen, dient u onmiddellijk medische hulp te zoeken.
29. Waarschuwing m.b.t. het gebruik van batterijen:
⚫Als de batterij onjuist wordt geplaatst, bestaat er explosiegevaar. Vervang de
batterij alleen door een zelfde of vergelijkbare soort batterij.
⚫Stel de batterij niet bloot aan extreem hoge of lage temperaturen of een lage
luchtdruk op grote hoogte tijdens gebruik, opslag of transport.
⚫Vervanging van een batterij door een incorrect type kan leiden tot een ontploffing
of de lekkage van ontvlambare vloeistoffen of gas.
⚫Het weggooien van een batterij in het vuur of een hete oven, of het mechanisch
verpletteren of insnijden van een batterij, kan leiden tot een explosie.
⚫Het achterlaten van een batterij in een omgeving met extreem hoge
temperaturen kan leiden tot een explosie of het lekken van brandbare vloeistof of
gas.
⚫Een batterij die aan een extreem lage luchtdruk wordt blootgesteld, kan leiden
tot een explosie of het lekken van brandbare vloeistof of gas.
⚫Aandacht voor het milieu is nodig bij het verwijderen van de batterijen.
INSTALLATIE
⚫•Pak alle onderdelen uit en verwijder de beschermende materialen.
⚫•Sluit het apparaat niet aan op het stopcontact, voordat u de netspanning
hebt gecontroleerd en voordat alle andere aansluitingen zijn gemaakt.
WAARSCHUWING
Klasse 1 Laserproduct
EN
NL
CLASS 1 LASER PRODUCT
KLASSE 1 LASERPRODUCT
CAUTION
LET OP
INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED.
ONZICHTBARE STRALING WANNEER OPEN
EN BEVEILIGING NIET INTACT.
AVOID EXPOSURE TO BEAM
VERMIJD BLOOTSTELLING AAN DE BUNDEL
This product contains a low power laser
device.
Dit product bevat een laser met laag
vermogen.