Lennox DL-700 User manual

Shower Niche
INSTALLATION GUIDE
DL-700 DS-650
SL-500 SS-400
Auckland Ph:09 2710168 Hamilton Ph:07 8477722
Christchurch Ph:03 3488885 Dunedin Ph:03 4775885
Online Order: www.lennoxbathroom.nz
- 1 -

Preparation
1. All Glue or Sealants could be acceptable for Polystyrene. We
recommend: Tite bond Multi-purpose. Holdfast Nail Power or
Fuller Max bond.
2. Rustproof screws.
Step one
Position niche between two studs
Step two
Apply silicon sealant to the back surface and to the sides of the
preformed shower niche
Step three
Insert the preformed shower niche into the desired wall and press
onto silicon surface side
Step four
Use silicon sealant between the backer board and around the
preformed shower niche
Step Five
Screw and fixing the edges of a shower niche by rustproof screws
reinforcement
Step Six
Secure your niche into the wall with fasteners. Tape and
waterproof the seam where the niche and the backer board meet.
Step Seven
Tile as usual
- 2 -