Englefield PREMIUM BATHSCREEN User manual

-1-
V087600-A02-M 07-09-2012
Kohler Co.
IMPORTANT
READ ALL INSTRUCTIONS CAREFULLY
BEFORE STARTING
THE INSTALLATION
Failure to comply
may void warranty
Bath screens must be installed in situations where the floor of the bathroom has a waterproof membrane installed.
For New Zealand, the bath screen must be installed in accordance with NZBC E3/AS1 clause 3.1.1.
For other countries, the bath screen must be installed in accordance with local building codes.
NOTE:
•A floor waste is recommended.
•Do not install in bathrooms where the floor is carpeted.
INSTALLATION GUIDE
PREMIUM
BATHSCREEN

-2-
V087600-A02-M 07-09-2012
Kohler Co.
Parts List - Exploded View

-3-
V087600-A02-M 07-09-2012
Kohler Co.
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
NOTE: WHEN ORDERING, THE FOLLOWING INFORMATION IS ALWAYS REQUIRED: WIDTH OF ENCLOSURE, COLOUR.
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
PARTS LIST - BATH SCREEN
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
NOITPIRCSED.ONTRAP.ONMETINOITPIRCSED.ONTRAP.ONMETI
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
1 Q6080XX Door Hinge Post Retainer 9 Q6334XX Hinge Post Screw Plug
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
2 Q6090XX Door Hinge Post 10 Q633250 Hinge Post Ajuster S/S
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
3 Q6150XX Hinge Body 11 Q910100 Screw 8 x 65 Pan Head
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
4 Q6155XX Hinge Inner 12 Q634045 Seal Door Edge
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
5 Q633200 Hinge Pad 13 Q634080 Seal Wall
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
6 Q912325 Screw M8 x 16 14 Q634060 Seal Drip Edge
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
7 Q616000 Slotted Nylon Bush 15 Q6356XX Top/Bottom Cap Hinge Post
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
8 Q6338XX Hinge Covers
Tools required
•Level
Tools required
Tools required
•Tape
•Pencil
•Flat blade screwdriver
•Philips screwdriver
•
Ruler
•Philips screwdriver
•Philips screwdriver
• Drill
• Centre-punch
• Hacksaw
• Soft hammer/mallet
• Caulking gun
• Stanley knife
• Caulking gun
• Caulking gun
TOOLS AND MATERIALS REQUIRED
The recommended sealant is (Not Supplied):
• Sika Sikasil NG

-4-
V087600-A02-M 07-09-2012
Kohler Co.
CAUTION: BEFORE DRILLING
HOLES ENSURE THERE ARE NO
ELECTRIC CABLES OR WATER
PIPES BEHIND WALLS.
DRILLING INTO THESE CAN
ENDANGER LIFE AND PROPERTY.
Tape over waste outlet.
Bath
MUST
be installed level.
SCREW No.8 x 65 mm
BRICK
CONSTRUCTION
SCREW No.8 x65 mm
6.0mm
NYLON
ANCHOR
BRICK
NYLON
Position Hinge Post retainer central
on top of bath Tiling Bead.
Using a 3mm drill bit, mark position
of holes on wall through extrusion.
Fix with Screw No.8 x 65mm.
Insert Hinge Post over Wall
Retainer and slide down into
position on Bottom Cap.
3.
4.
Set adjusting screws using
6mm spacer provided.
ASSEMBLED UNIT
1.
1.
2.
Bath
Bath
WALL
RETAINER
HINGE POST
L/H SIDE PANEL
R/H SIDE PANEL
Fit Bottom Cap to Hinge Post
Retainer.
Fit Bottom Cap to Hinge Post
Retainer.
CAUTION: Fixing the retainer only to
the backboard may void warranty as
a backboard by itself is not able to
provide enough support for the bath
screen.
Ensure Hinge Post Retainer
3.
3.
profile is plumb.
3.
3.
Anchor Hinge Post Retainer into
wall stud for maximum support.
TIMBER
TIMBER
CONSTRUCTION
CONSTRUCTION

-5-
V087600-A02-M 07-09-2012
Kohler Co.
On the inside of the Hinge
Post, fit slotted plastic bush
through the hole in the glass.
IMPORTANT: ADJUSTMENT
SCREWS MUST BE ADJUSTED IN
SEQUENCE TO AVOID
DISTORTION OF HINGE POST.
Position Door Edge Seal.
DOOR EDGE
DOOR EDGE
SEAL
I
MPORTANT: ENSURE BOTTOM
OF DOOR EDGE SEAL IS
CORRECTLY FITTED AS SHOWN.
7
Position glass by taping the
7
7
spacer supplied to the bath as
7
7
.
.
shown below. Level top of glass
with top cap.
CAUTION: Care must be taken
to avoid cross-threading the
cap screws in the Hinge Plate.
8
On the inside of the Hinge
On the inside of the Hinge
Post, fit slotted plastic bushPost, fit slotted plastic bush
Post, fit slotted plastic bush
Post, fit slotted plastic bush
Trim the top of the Door
Edge Seal flush with the
glass.
9.
For “out-of-true” walls, level
Hinge Post using adjusting
screws.
5.
Max 22mm
Max 22mm
6.
Fit Top Cap in place using
silicone and tape down.
10.
Ensure that the slot in
the top bush is
vertica
l
and the slot in the bot-
tom bush is
horizonta
l.
IMPORTANT
Using M8 CSK screw
attach
Inner Hinge Plate.
NOTE: Fix top hinge first.
Tighten screws firmly
to secure glass.
BOTTOM HINGE
TOP HINGE

-6-
V087600-A02-M 07-09-2012
Kohler Co.
Position the logo as shown after
door installation. One logo on
the front of the door and one on
the reverse.
HORIZONTAL DIMENSIONS
VERTICAL DIMENSIONS
EQUAL
IMPORTANT: NOTE ORIENTATION
OF SCREW PLUG HEAD.
MARK SHOULD BE LOCATED TO
SIDE AS SHOWN.
Fit Screw Plugs
Using recommended Sealant,
seal full height between walls
and Wall Retainer Profiles,
and all other exterior joins.
Using recommended Sealant,
IMPORTANT
SEALANT SHOULD BE APPLIED TO
ALL OUTSIDE JOINTS - DO NOT
SEAL FROM INSIDE.
Attach Door Drip Edge Seal.
11.
Slide on the. four Hinge Covers.
11.
11.
12.
12.
Slide on the. four Hinge Covers.
All rights reserved to alter designs and specifications without notice.
WARNING: Products in this leaflet are subject to Industrial Property Protection. All dimensions given are approximate only.
©
Copyright Kohler NZ Ltd 2009
LOGO
LOGO
Follow the sealant manufacturer’s
directions.
13.
13.
14.
14.
INSTALLATION COMPLETE