Lenovo Q24h-10 Instructions for use

1
Q24h-10 Simplified service manual for dismantling
Model Name: Lenovo Q24h-10

2
Exploded Diagram

3
1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD y the side
carefully and DON’T touch
or
press panel directly.

4
2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver
(#2)
C/D disassembly tool
Gloves or soft cloth

5
3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE under the monitor)
Pull out of stand
Remove the screw * 4
pcs
Tool : Screwdriver #
Use the C/D disassembly tool to
release Rear cover hook from
disassemble hole on bottom
Remove all the foil and tape

6
Unplug the lightbar and speaker
connector
Remove the speaker
Remove the K/P PCB
Remove
the screw * 5pcs
Tool : Screwdriver #
Rasie the chassis and remove the
foil*1pcs
Unplug LVDS line

7
Remove the chassis
Remove the screw * 9
pcs
Tool : Screwdriver #
Remove the base from panel
Remove the mylar
Remove All screws*7pcs
Tool : Screwdriver #
Take out of the PCB