Lenovo TIO Flex22i User manual

TIO Flex22i Simplified service manual for dismantling
Model Name: Lenovo TIO Flex22i

Exploded Diagram

1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch
or
press panel directly.

2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver (#2)
spacer screwdriver
C/D disassembly tool
Gloves or soft cloth

3. Disassembly SOP
Put the monitor on a flat surface
(Put the pe bag under the
monitor)
Push the button to release the
stand
Remove the
screw * 4pcs
Tool : Screwdriver #2
Pull away from the front chin

Remove All tape and foil
Remove the chassis screw.
Tool : Screwdriver #2
Release the keypad pcb from the
middle frame
Remove the lens pcb
Unplug light bar line and LVDS
line

Remove the middle frame
Remove the acetate tape
Take out the mylar sheet from
Main chassis
Remove All screw.
Tool : Screwdriver #2

Take out PCB and Peel off all
Gasket、mylar.