Lenovo ThinkVision M14 Instructions for use

M14 Simplified service manual for dismantling
Model Name: Lenovo M14

Exploded Diagram

1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch or
press panel directly.

2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver
(#2)
C/D disassembly tool
Gloves or soft cloth

3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE on under the
monitor)
Remove the rubbers
* 4pcs
Tool : Hand
Remove the
screw * 4pcs
Tool : Screwdriver #2

Remove the screw * 2
pcs
Tool : Screwdriver #2
Release base top cover
(Notes: three hooks)
Remove the hinge screw* 6pcs.
Unplug edp from PCBA
Tool : Screwdriver #2

Remove the PCBA screw* 4pcs.
Remove the Tilt-foot screw* 4pcs.
Tool : Screwdriver #2
Take out the buttons
Tool : Screwdriver #2
Remove all gasket and thermal pad
Take off the mylar bezel from
back cover

Remove back cover screw* 6pcs.
Tool : Screwdriver #2
Peel off double-sided tape and
Take out Panel .

Unplug edp line from panel