Lenovo ThinkVision T25d-10 Instructions for use

T25D-10 Simplified service manual for dismantling
Model Name: Lenovo T25D-10

Exploded Diagram

1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch
or
press panel directly.

2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver (#2)
spacer screwdriver
C/D disassembly tool
Gloves or soft cloth

3. Disassembly SOP
Step
Figure

Press the
button at the
bottom of the
Stand and pull
out the Stand
and Base by
hand.
1.Use the
Screwdriver to
remove the
Screws.
2.Pull the
middle frame
out by hand.
3.Open the
latches by
Scraper and
remove the
Keyboard to
separate from
rear cover by
hand

1.Remove the
Screws by the
Screwdriver to
separate the
Middle frame
and Panel.
2. Tear out all
Tapes by
hand.
3. Remove the
screws by
screwdriver
and
disconnect the
connectors
to separate the
MAINFRAME
And PANEL by
hand.

Remove
mylar and
Remove the
screws by
screwdriver to
remove the
MAIN BOARD
by hand.
Tear out all
Tapes by
hand to
separate the
Main board
and power
board.