8. When powered by 2 x AAA batteries, time display will automatically disappear in 5 seconds,
you can press any of the buttons to show the time display.
LIGHT:
1. First touch the button to switch on white light and use it as a bedside lamp. You can
adjust the white light intensity by touching the buttons , there are 10 different
levels of brightness.
2. Touch the button a second time to enter into automatically colour changing mode
and use it as a mood light. You can touch the buttons repeatedly to choose to
display a single colour light. The light colour options are green, red, blue, pink, orange and
aqua.
3. Third touch button to switch off the light.
SETTING THE ALARM/WAKE UP TIME:
1. Touch the button if you want to switch the alarm on or off. The alarm symbol
appears on the time display when you switch on the alarm. It disappears when you switch
off the alarm.
2. Long touch the button for 3 seconds to set the alarm, the hour indication will start to
blink and you can adjust the hour of alarm time by pressing the buttons. Setting
will be cancelled if nothing is pressed within 5 seconds.
3. Touch the button. The minute indication will start to blink and you can adjust the
minutes of alarm time by pressing the buttons.
Setting will be cancelled if no action in 5 seconds.
4. Touch the button to save the alarm time.
5. Press the button on the rear of the unit, then touch the buttons on the
front of the unit to choose between 1 and 7 as a wake-up sound. 1-6 are pre-set natural
sounds and 7 is FM radio). If switching between 1 and 6 as a new alarm sound, a preview of
that sound will be played for 10 seconds. Switching to number 7, no sound will be played
and your last listened to FM station will be the wake-up sound.
