Lestov LT-TPM-A135 User manual

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
Special Declaration
All the content of this manual has been already checked carefully, Any
misunderstanding or printing error will be kept by the manufacturer
Any technical improvement will be recorded in the new manual which
printed newly, Any change of color and design will no notice by the
manufacturer, Please check the real products
Please read this operation manual carefully before using the induction cooker in the
right way
Commercial Induction Cooker Manual
Model No. LT-TPM-A135
Thanks for choosing Lestov Induction Cooker
Please read this manual before using
Please keep this manual after reading for checking in the future
The company reserves the right to modify

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
1、Operating Principle
The Induction cooker is a kind of new kitchen product in the kitchenware market, which
had broken the traditional way of cooking by using the most advanced magnetic field
induction eddy current heating technology. As the current cross, the coil and the magnetic
field will be formed. When this magnetic line cross through the magnetic field and
whirlpool have been formed and make the effect of a pot or boiler, heating up the food in
the pot.
2、Technical Specification
(1) Magnetic field induction eddy current heating technology
Current (17-40) kHz crosses the coil and makes a magnetic field, when the magnetic
line crosses the field, heat will be caused to heat the pot and cook the food in the pot
(2) AC: 220V Current: 50 / 60HZ Power: 3.5KW
(3) The requirement for the pot which used in the cooker
Because the no magnetic materials have not made the magnetic line, So the whirlpool
can not be formed, and so, the heat can not be made. Moreover, the magnetic materials
with bad electric conduction can not make bigger whirlpools that need to make little heat
(P=I²R). So only high conductive materials can used as the induction pot, such as iron pots,
A3 iron pots, and stainless steel pots.
Noted: Without any operation for more than 3 hours, the cooker will shut off
automatically
3、Error and Maintenance
Error
Maintenance
(1) Power on, No “Bee” Sound
①Check the main power
cable
OK
②Check power switch power
or leakage
Check leakage and circuit
(2) No working switch on and Not heating
①Switch on, LED display no
changing
Change the switch
(3) When cooker working, no
response or power reduce down and
return to normal repeat this error
1No operating cooker for more
than 2 hours, restart the cooker
2Overheat protection, check the
power connection and fan working or not

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
4、Error Code
E1
No pot
E5
IGBT Thermistor
cut off
E9
Short circuit
E2
Overheat for bottom
pot
E6
Low voltage
EA
Wire coil cut off
E3
Thermistor cut off
E7
High voltage
EB
Fan no working
E4
IGBT Overheat
E8
IGBT Over-current
When you have checked up above without the trouble cleaning please contact the
agent or our salesman
5、Introduction of Operation
After switching on, all the LED displays will flash one time. Then one second later
power light flickers, the latter three digital LED display lights on and the stove starts
to work
Turn on with general 3000W, then the cooker starts to work, press on “+”, and “-”
with 500W per level to turn it up or down.
Press on the soup cook button, and the stove cooks soup automatically, the LED
display “AU” and the cooking time show in turn. If you want to cancel it, press the
button again, then you can adjust the power.
Press on the heat insulating button and the cooker begins to keep warm, the LED
display shows. If you want to cancel it, press the button again, then you can adjust
the power.
When the cooker starts to work, press the time control button and click the “+”, and
“-” to limit the time by 1 minute per level, Long pressing the buttons will limit the
time by 10 minutes per level. When time is up the cooker will keep in standby mode.
When the cooker is in shutdown condition, press the reserve button, then the cooker
begins to reserve, click “+”, and “-” to reserve by 5 minutes per level to adjust, and
long press it will reserve by the hour. When time is up the cooker starts to work
automatically.
After the cook is finished, press the on-off button, power light and working light will
be shut off, Motor fan will continue working for 1 Minute and power off
automatically.
After use, controlling the closed unit can not depend on the temperature detector in
the stove.
This equipment is suitable for ambient temperature: - 10 ~ 38 ℃, humidity ≤90%
6、The Structural Representation
( Front Views ) ( Side Views )
( Upward Views )

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
7、Installation and Debugging
The water input part is at the back top part of the induction cooker. And the wire part
at the bottom of the induction stove, with voltage 220V 1~，should install with a
suitable current leakage protection switch, and contact with the ground line. Please
consult a professional about this.
Keep the cooker’s back panel 35cm away from the wall for maintenance. If cannot
leave such distance, at least leave 5cm for heat radiation.
8、Safety Operation Notes
1. No water in the cooker and ventilation and dry condition are needed. Remark: the
waterproofing grade of the induction cooker is IPXO.
2. When using the cooker, the steel around the burner will be in temperature, please
be careful.
3. Do not shut off the power when the cooker is working for protecting the power
switch damaged.
4. Before cutting off the power, Please confirm the cooker and motor fan stopped
5. When using, please don’t shelter the LED display in order to indicate the work
condition of the cooker.
6. Glass ceramics are easy to break, No striking and shaking hardly.
7. Do not use any pot and kitchenware which not certificated by the manufacturer.
8. Heating pot or kettle must be￠20-35cm if not machine will be easily damaged.
9. Do not block the inlet and outlet. No flush the motor fan and outlet.
10. Do not place any kitchenware pot or other spoon knife on the glass ceramics for
protection broken.
11. Attention when using the cooker, any ring and watch with the operator will be
heated.
12. No plug connecting the power, because big current, confirm enough power
outputting before using.
13. When connecting power, the leakage protection switch is needed.
14. If the cooker is close to the wall, fire protection should be taken and follow the
fire protection policy strictly.
15. Any maintenance which is not authorized by the manufacturer will not be
allowed, Please contact the nearest agent.
16. Must use the pot or kettle recommended by the manufacturer, and the heating
diameter must be more than 160mm.
17. Warning: The line cord needs to be repaired by the manufacturer or authorized

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
agent.
18. The operator with a pacemaker could not use this product.
19. Warning: No dismount of the machine for laypeople because of the high voltage
in the machine and dangerous.
20. Keep protection away from the Child.
21. Warning: Children and the disabled do not use this machine.
22. Warning：Any cracking on the surface, Please cut off the power
9、The Power Gears parameter
3.5KW Countertop Commercial Induction Cooker Power Parameter
Power Gear
1
2
3
4
5
6
7
8
Current (A)
4.6
4.6
6.1
8.2
9.8
11.7
13.4
15.1
Power (W)
1012
1012
1342
1804
2156
2574
2948
3322
Description
Gap heating, stop
for 3 seconds
every 3 seconds
Continuous Heating
10、Cleaning and Maintenance
When cleaning the induction cooker, it must be powered off, strictly prohibit flushing
water or cleaning with the steam cleaner, and should be cleaned with a cleaning
cloth.
To ensure the good heat dissipation efficiency of the core machine, we suggest its
inlet should be cleaned monthly.
11、Mark Meaning
GB/T 5465.2-5140None ionization electromagnetic radiation Indicating the
radiation is higher than normal standard or there is potential risk; or indicating the
device or the system for example the radiate equipment in diagnosis or treatment or
the areas of applying medical electronics device which used radio frequency
electromagnetic energy firing.
GB/T5465.2-5036 Dangerous voltage Meaning dangerous voltage caused danger.
Earthed circuit Identifying the terminal of the outside protection conductor which
prevents electric shock or the terminal connected with the protective earthing
electrode..