Lestov LT-TPL-B135 User manual

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
Special Declaration
All the content of this manual has been already checked carefully, Any
misunderstanding or printing error will be kept by the manufacturer
Any technical improvement will be recorded in the new manual which
printed newly, Any change of color and design will no notice by the
manufacturer, Please check the real products
Please read this operation manual carefully before using the induction griddle in the
right way
Commercial Tabletop Induction Griddle Manual
Model No.：LT—TPL-B135 / 105
Thanks for choosing our Induction griddle
Please read this manual before using
Please keep this manual after reading for checking in the future
The company reserves the right to modify

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
1、Operating Principle
The Induction cooker is a kind of new kitchen product in the kitchenware market,
which had broken the traditional way of cooking by using the most advanced magnetic
field induction eddy current heating technology. As the current cross, the coil and the
magnetic field will be formed. When this magnetic line crosses through the magnetic field
and whirlpool have been formed and makes the effect of a griddle, heating the food in the
grill plate.
2、Technical Specification
(1) Magnetic field induction eddy current heating technology
Current (17-40) kHz crosses the coil and makes a magnetic field, when the magnetic
line crosses the field, heat will be caused to heat the pot and cook the food in the pot.
(2) AC: 220V Currency: 50 / 60 HZ Power: 3.5KW / 5KW
(3) The requirement for the grill plate which use in the induction griddle
Because the no-magnetic materials have not made the magnetic line, So the
whirlpool can not be formed, and so, the heat can not be made. Moreover, the magnetic
materials with bad electric conduction can not make bigger whirlpools that need to make
little heat (P=I²R). So only high conductive materials can be used as the induction pot,
such as iron plates, A3 iron plates, and stainless steel plates.
Noted: Without any operation for more than 3 hours, the cooker will shut off
automatically
3、Installation and Debugging
The water input part is at the back top part of the induction griddle. And the wire part
at the bottom of the induction griddle, with voltage 220V 1~，should install with a
suitable current leakage protection switch, and contact with the ground line. Please
consult a professional about this.
Keep the griddle’s back panel 35 CM away from the wall for maintenance. If cannot
leave such distance, at least leave 5CM for heat radiation.
4、Introduction of operation
Make the power switch to the “0” position
After switching on, “Bee” all the LED displays will flash one time. one second later,
the power light (red) flickers, and then the working lights(blue) shut down. Then

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
Place the food on the grill plate for cooking use.
Twist the magnetic switch, and the power light, and the working light flash, the
cooling fan works, the display shows 1, and the stove starts work at gear 1; then
adjust the switch to different power and the LED shows the working gears. When
twisting the gears the stove sounds “Bee” and there are 8 gears.
After the cook is finished, twist the switch to “0”, LED will display “0”, power
light and working light will be shut off, Motor fan will continue working for 1
Minute and then power off automatically.
After the fan stops working, shut off the power.
After use, controlling the close unit can not depend on the temperature detector in the
stove.
This equipment is suitable for ambient temperature: - 10 ~ 38 ℃, humidity ≤90%.
5、The Structural Representation
( Front Views ) ( Side Views )
( Top Views )
6、Safety and Maintenance
Please read the manual carefully before using the griddle.
The core part of the griddle should be dry and ventilated.
When using the griddle, please don’t switch the knob frequently, which may lead to
no operation effect.
Do not shut off the power when the griddle is working for protecting the power
switch damaged.
Before cutting off the power, Please confirm the griddle and motor fan stopped.
When using, please don’t shelter the LED display in order to indicate the work
condition of the griddle.
Do not flush on the bottom of the griddle, Cannot block the air outlet.
Cannot place metal in the grilling area, such as fork, spoon., etc.
Please don’t wear a ring & watch during cooking.
When connecting the griddle with power, should contact with a 3mm GFCI first.
If the griddle would place near the wall, panel, or another machine, suggest covering
that with non-combustible materials and be careful of fire regulations.
If abnormal things appear on the machine, don’t repair them privately, should consult
professional people.
Warning: If the coil is damaged, should replace by professional people.
Warning: It’s in high voltage inside of the griddle, prohibit dismantling the machine
privately.
If the user should work with Cardiac pacemakers, please contact the supplier first.
Warning: This manual does not apply to physical or mental defect people
Warning: If the cooker is cracking, turn off the electricity rapidly.

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
The connecting wire should be an anti-oil wire, not a normal YZW.
7、Error and Maintenance
When the cooker do not work, please check below items:
Error
Maintenance
(1) Power on, No “Bee” Sound
①Check the main power cable
OK
②The GFCI or air switch trip
Check leakage first, the power on
(2) Power on with “Bee”, but cannot heating
①Switch did not turn to “0” before
power on
Make the switch turn to “0”, then
restart the machine
②Switch turning, but No. On LED
display is the same
Switch or button damage, replace
with new one
(3) When cooker working, No any
response or power reduce down and
return to normal and repeat this error
1Overheat protection, check the
power connection and fan working or
not
2Abnormal voltage result in
over-voltage or over-current protection
(4) When heating, LED display
appear “3” or “8” over-heating
Turn off, then restart
8、Error Code
If still cannot work with upper info, please contact our agent and salesman
9、Thermostat Control Panel
(1) Display the Process Value (PV) , parameter, set point and parameter setting
(3) Deviation Indicators: Show the relation between the PV and the set point
Lit: The PV is more than 5℃/℉higher than the set point
Lit: The PV is more than 5℃/℉Lower than the set point
Lit: The PV is within 5℃/℉of the set point
The Relevant deviation indicator will flash during autotuning
(4) SP: Lit while the set point is display on display No.1
Out (6): Lit while the control out put is ON. Not lit while the Control Output is OFF
(7) Stop: No lit during operation. Lit while operation is stopped
(8) Level Key: Changes the parameter within the setting level
(9) Mode Key: Changes the parameter within the setting level
(10) Down Key: Reduces the setting
(11) Up Key: Increases the Setting
E1
No pot
E2
Wire coil overheat
E3
Wire coil
thermistor cut off
E4
IGBT
Overheating
E8
Overheat for
bottom pot
E5
IGBT thermistor
cut off
E9
Pot thermistor
cut off

Commercial Induction Cooker Manufacturer https://leadstov.com/ [email protected]
(12) Press these key for at least 1 Seconds in operation level or adjustment
level to go to protect level; Press these keys for at least 1 second in protect level to return
to operation level
(13) Press these keys for at least 2 second in protect level to return to operation
level. *1
(14) Press these keys for at least 2 seconds to start or stop operation. *2
*1: These keys are disabled when starting and stopping autotuning has been disabled
with operation control key protection.
*2: These keys are disabled when starting and stopping operation has been disabled
with operation control key protection.
10、The parameters of power gears
11、Mark Meaning
GB/T 5465.2-5140 None ionization electromagnetic radiation Indicating the radiation
is higher than normal standard or there is potential risk; or indicating the device or
the system for example the radiate equipment in diagnosis or treatment or the areas
of applying medical electronics device which used radio frequency electromagnetic
energy firing.
GB/T 5465.2-5036 Dangerous voltage Meaning dangerous voltage, caused danger
Earthed circuit Identifying the terminal of the outside protection conductor which
prevents electric shock or the terminal connected with the protective earthing
electrode.
12、Cleaning and Maintenance
When cleaning the induction cooker, it must be powered off, strictly prohibit flushing
water or cleaning with the steam cleaner, and should be cleaned with a cleaning
cloth.
To ensure the good heat dissipation efficiency of the core machine, we suggest its
inlet should be cleaned monthly.
3.5KW Countertop Commercial Induction Griddle Power Parameter
Power Gear
1
2
3
4
5
6
7
8
Current (A)
4.6
4.6
6.1
8.2
9.8
11.7
13.4
15.1
Power (W)
1012
1012
1342
1804
2156
2574
2948
3322
Description
Gap heating, stop
for 3 seconds
every 3 seconds
Continuous Heating
5KW Countertop Commercial Induction Griddle Power Parameter
Power Gear
1
2
3
4
5
6
7
8
Current (A)
7.2
7.2
9.6
12.3
14.8
17.3
19.9
22.5
Power (W)
1584
1584
2112
2706
3256
3806
4378
4950
Description
Gap heating, stop
for 3 seconds
every 3 seconds
Continuous Heating