LevelOne POR-0102 User manual

POR-0102
2-Port Power over Ethernet
Repeater
POE
Ethernet Switch
15.4W
100 m
POR-0102
100 m 100 m
Power
POR-0102
POR-0102
PD1+PD2
≦
6.5
PD3+PD4
≦
6.5
PD1
PD2
PD3
PD4

Maximum Range
Connect with Standard 15.4W PSE
End to end distance 100m 200m 300m 400m 500m
Daisy-Channing
( PoE Repeater )
0 1 2 3 N/A
Total Output Power
(Out 1+Out 2)
≦10.9 W ≦6.5 W ≦3.84 W Data only
No power
Connect with Hi-Power 30W PSE
End to end
distance
100m 200m 300m 400m 500m 600m 700m 800m
Daisy-Channing
( PoE Repeater )
0 1 2 3 4 5 6 7
Total Output Power
(Out 1+Out 2)
≦
25.5W
≦
21W
≦
16.5W
≦
12W
≦
7.5W
≦
3.84W
Data only
No Power
Connect with Hi-Power 40W PSE
End to end
distance
100m 200m 300m 400m 500m 600m 700m 800m 900m
Daisy-Channing
( PoE Repeater)
0 1 2 3 4 5 6 7 8
Total Output Power
(Out 1+Out 2)
≦
28W
≦
25.5W
≦
21W
≦
16.5W
≦
12W
≦
7.5W
≦
3.84W
Data only
No Power
Quick Guide
Step 1: Connection to Power over Ethernet Switch
A. Connect one of the Ethernet Switch port with PoE power supply to the PoE IN port of P0R-0102
as the following connection.
B. The LED indicators “POWER” and “IN” will turn on indicating the PoE and Ethernet connection.
C. The LED indicators “IN” will flash to indicate Ethernet data activity.
PoE Switch
100 m

Step 2: Connection to PoE PD
D. Connect the PoE OUT1 & OUT2 port of PR102 to power up the PD device as the following
connection.
E. The LED indicators “OUT1” will turn on indicating the PoE and Ethernet connection.
F. The LED indicators “OUT1” will flash to indicate Ethernet data activity.
G. The LED indicators “OUT2” will turn on indicating the PoE and Ethernet connection.
H. The LED indicators “OUT2” will flash to indicate Ethernet data activity.
** Note: If the Ethernet cable is not standard CAT5 cable, the POR-0102 may be working for shorter
length than 100 meter.
V1.0
POE
Ethernet Switch
100 m 100 m
POR-0102
Power