LevelOne WBR-6003 User manual

0
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
LevelOne Wireless Router
(WBR-6003) Setup User’s Guide

1
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
1 Get to know LevelOne (WBR-6003) Wireless Router.........................................................2
A. Tech Specs - Connections and Expansion .................................................................2
B. Minimum System Requirements (bb500/ FibreHome500/ bb1000/ FibreHome1000).2
2 Connecting to LevelOne Router..........................................................................................3
3 Switching your broadband Internet service to HKBN..........................................................9
4 Factory default reset of LevelOne Router.........................................................................11

2
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Get to know LevelOne (WBR-
6003) Wireless Router
1 Get to know LevelOne (WBR-6003) Wireless Router
A. Tech Specs - Connections and Expansion
B. Minimum System Requirements (bb500/ FibreHome500/ bb1000/ FibreHome1000)
To ensure that you have a fast and stable network, please refer to the following as a
recommended minimum system requirement:
Central Processing Unit (CPU)
Intel Core2 Duo P8700/2.5 (3 GHz or above)
System Memory
4GB or above
Hard disk
64GB SATA II SSD (Min. I/O speed of 200MB/s)
Network Adaptor
100/1000M Network Adaptor
Status LED
WAN LED
Wireless LAN LED
LAN LED
LAN
Port
WAN
port
AC
Socket

3
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Connecting to LevelOne Router
2 Connecting to LevelOne Router
Make sure you have a LAN cable connected from the HKBN wall plate/ONT to the WAN port
of your LevelOne Router (WBR-6003). Using a second LAN cable, connect it from the Router
LAN port to the computer LAN port. Once finished, switch on the power supply for the router
and turn on the computer.
Open your Internet browser, and input [http://192.168.1.1 ] into the address-bar then press
[Enter]. Enter [admin] as the default password, click [Login]

4
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Connecting to LevelOne Router
2Connecting to LevelOne Router
Choose [Wizard] and click [Enter]
Click [Next] to begin setup.

5
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Connecting to LevelOne Router
2Connecting to LevelOne Router
Input [admin] under[Old Password]. Create anewpassword under [NewPassword] and input
again under [Reconfirm], click [Next].
Choose [Auto Detecting WAN Type], click [Next].

6
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Connecting to LevelOne
Router
2Connecting to LevelOne router
Select [Obtain an IP address from ISP automatically. (Dynamic IP Address)], click [Next].
In the [Dynamic IP Address] page, click [Next] again.

7
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Connecting to LevelOne Router
2Connecting to LevelOne Router
Select [Enable] under Wireless function, then create a [Network ID(SSID)], then choose [Auto]
under [Channel]. Click [Next] to continue.
Choose [WPA-PSK/ WPA2-PSK] under [Security], click [Next].

8
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Connecting to LevelOne Router
2Connecting to LevelOne Router
Choose [ASCII] under [Preshare Key Mode], then create a wireless password under
[Preshare Key], click [Next].
Confirm all settings displayed in the [Summary] page are correct, click [Apply Settings]. The
device will automatically reboot to apply the settings made. Click [Next] then [Finish] to
complete the setup.

9
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Switching your broadband
Internet service to HKBN
3Switching your broadband Internet service to HKBN
After logging in to the router through your browser, select [Advanced Setup] then click [Enter].
Select [Primary Setup] on the left-hand side. Click [Change] under [WAN Type].

10
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Switching your broadband
Internet service to HKBN
3Switching your broadband Internet service to HKBN
Choose [Dynamic IP Address] then click [Save].
Confirm the [WAN Type] that is displayed [Dynamic IP Address] under [Primary Setup] page,
click [Save] to update the settings.

11
HKBN_SETUP_ROUTER_LEVELONE_ENG_230315
Factory default reset of
LevelOne Router
4Factory default reset of LevelOne Router
If the device is not accessible from the router setting page, you can reset to the factory default
setting by pressing the reset button:
1. Confirm your TP-LINK router is switched on.
2. Manually reset your router by pushing the button (5 sec) located at the back of device
when power is on
3. Default Setting:
Password
IP Address
SSID
admin
192.168.1.1
LevelOne
The Reset Button is located between the WAN port and the power supply socket:
Reset Button