LevelOne WBR-6800 User manual

LevelOne
User Manual
Ver. 1.0
WBR-6800
N Wireless 3G Router

2
Safety
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV technician for help.
CE Declaration of conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022
class B for ITE, the essential protection requirement of Council Directive 89/336/EEC on the
approximation of the laws of the Member States relating to electromagnetic compatibility.
CE Marking Warning
Hereby, Digital Data Communications, declares that this product (Model-no. WBR-6800) is in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The CE-Declaration of Conformity can be downloaded at:
http://www.levelone.eu/support.php

3
General Public License
This product incorporates open source code into the software and therefore falls under the guidelines
governed by the General Public License (GPL) agreement.
Adhering to the GPL requirements, the open source code and open source license for the source
code are available for free download at http://global.level1.com.
If you would like a copy of the GPL or other open source code in this software on a physical CD
medium, LevelOne (Digital Data Communications) offers to mail this CD to you upon request, for a
price of US$9.99 plus the cost of shipping.

4
Table of Content
1. INTRODUCTION................................................................................................................................................................5
USER MANUAL OVERVIEW .........................................................................................................................................................5
2. UNPACKING AND SETUP................................................................................................................................................6
FEATURES ...................................................................................................................................................................................6
PACKAGE CONTENTS ..................................................................................................................................................................6
3. HARDWARE INSTALLATION ........................................................................................................................................7
FRONT VIEW ...............................................................................................................................................................................7
REAR VIEW.................................................................................................................................................................................8
HARDWARE INSTALLATION STEPS...............................................................................................................................................9
4. CHECK YOUR NETWORK SETTINGS .......................................................................................................................10
5. CONFIGURATION WIZARD .........................................................................................................................................11
6. ADVANCED SETUP .........................................................................................................................................................14
BASIC SETTING .........................................................................................................................................................................15
Primary Setup.......................................................................................................................................................................16
DHCP Server........................................................................................................................................................................21
Wireless Settings ..................................................................................................................................................................22
Change Password.................................................................................................................................................................32
FORWARDING RULES ................................................................................................................................................................33
Virtual Server.......................................................................................................................................................................34
Special AP............................................................................................................................................................................36
Miscellaneous Items .............................................................................................................................................................37
SECURITY SETTINGS .................................................................................................................................................................38
Packet Filter.........................................................................................................................................................................39
Domain Filter.......................................................................................................................................................................41
URL Blocking.......................................................................................................................................................................42
MAC Address Control ..........................................................................................................................................................43
Miscellaneous Items .............................................................................................................................................................45
ADVANCED SETTINGS...............................................................................................................................................................46
System Time..........................................................................................................................................................................47
System Log ...........................................................................................................................................................................48
Dynamic DNS.......................................................................................................................................................................49
SNMP Setting .......................................................................................................................................................................50
Routing.................................................................................................................................................................................51
Schedule Rule.......................................................................................................................................................................53
QoS Rule...............................................................................................................................................................................55
TOOLBOX..................................................................................................................................................................................56
View Log...............................................................................................................................................................................57
Firmware Upgrade...............................................................................................................................................................58
Backup Setting......................................................................................................................................................................58
Reset to Default....................................................................................................................................................................58
Reboot ..................................................................................................................................................................................58
Miscellaneous Items .............................................................................................................................................................59
APPENDIX A 802.1X SETTING...........................................................................................................................................60
APPENDIX B FAQ AND TROUBLESHOOTING...............................................................................................................64
TECHNICAL SPECIFICATIONS...........................................................................................................................................70
Default Settings
IP Address
192.168.0.1
Password
password
Wireless Mode
Enable
Wireless SSID
WBR-6800
Wireless Security
None

5
1. Introduction
Congratulations on your purchase of LevelOne WBR-6800 N Wireless 3G Router. This product is
specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution
for Internet surfing, and is easy to configure and operate even for non-technical users.
Instructions for installing and configuring this product can be found in this manual. Before you install
and use this product, please read the manual carefully for fully exploiting the functions of this product.
User Manual Overview
Introduction
Describes the NWireless 3G Router.
Unpacking and Setup
Helps user to get started with the basic installation of the N Wireless
3G Router.
Hardware Installation
Describes the LED indicators of the N Wireless 3G Router.
Configuration
Describes the functionalities and its settings.
Technical Specifications
Lists the technical (general, physical and environmental)
specifications of the N Wireless 3G Router.

6
2. Unpacking and Setup
This chapter provides the package contents and setup information for the N Wireless 3G Router.
Features
Integrates with 1-Port Ethernet LAN: 10/100Mbps MDI-MDI-X Auto-Sensing
Provides 10/100Mbs RJ45 or 3G (USB) WAN interface for Broadband Internet Access
Auto-fallback Feature to Ensure Always-On Connectivity
Secured Wireless with WEP, WPA, WPA2-PSK or 802.1x RADIUS Encryption
Backwards compatible with IEEE 802.11g/b standards
Built-in Firewall and Quality of Service functions
Quick Setup or Web-Based Interface Configuration and Management
Features Built-In VPN Pass-Through, Universal Plug and Play and Advanced DDNS Services
Package Contents
Open the box of the N Wireless 3G Router and carefully unpack it. The box should contain the
following items:
WBR-6800 N Wireless 3G Router
Power Adapter
RJ45 Ethernet LAN Cable
Antenna
Desktop Stand
CD Manual / Utility
Quick Installation Guide
If any item is found missing or damaged, please contact your local reseller for replacement.

7
3. Hardware Installation
Front View
Label
Status
Indicators
3G
Flashing
Flashes when unit is ready
(No 3G Modem is attached)
On
When unit is ready
(3G Modem is attached)
Off
Power is Off
LAN
Flashing
Flashes when data is being transferred
On
Indicates link is active
Off
Indicates no active link
WAN
Flashing
Flashes when data is being transferred
On
Indicates WAN link is active
Off
Indicates no WAN link
WLAN
Flashing
Indicates Wireless is enabled
Off
Indicates Wireless is disabled

8
Rear View
Antenna
To connect the supplied antenna
WAN
10/100 RJ-45 Ethernet Port to connect to a modem or router
LAN
10/100 RJ-45 to connect to Ethernet network card or Hub/Switch
Reset
To reset the WBR-6800 to factory default settings.
Press and hold the reset button for 5 seconds.
(All your customized settings will be lost)
Power
Connect to the included Power Adapter
WPS
WiFi Protected Setup Push Button
Press the button for 1 second to initiate WPS.

9
Hardware installation steps
Decide where to place your Wireless Router
You can place your Wireless Router on a desk or other flat surface. For optimal performance, place
your Wireless Router in the center of your office (or your home) in a location that is away from any
potential source of interference, such as a metal wall or microwave oven. This location must be close
to power and network connection.
Setup LAN connection
Wired LAN connection: Connect an Ethernet cable from your computer’s Ethernet port to the
LAN port of the Wireless Router. Or plug a 3G USB Modem to WBR-6800
Wireless LAN connection: Locate the WBR-6800 at a proper position to gain the best transmit
performance.
3. Setup WAN connection
Prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet
backbone.
4. Power on
Connecting the power cord to power inlet and turning the power switch on, this product will
automatically enter the self-test phase. When it is in the self-test phase, the Status indicator will
be lighted ON for about 10 seconds, and then it will be flashed 3 times to indicate that the self-test
operation has finished. Finally, the Status indicator will be continuously flashing once per second
to indicate that this product is in normal operation.

10
4. Check Your Network Settings
1. Please make sure your PC can get IP address automatically so the WBR-6800 can communicate
with your PC during configuration.
Select “Control Panel” > “Network Connections”.
Right click the “Local Area Connection” and choose “Properties”.
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the following screen and make sure you
have selected “Obtain IP address automatically”
2. Reboot computer to make sure you have received the IP address correctly.

11
5. Configuration Wizard
Once properly configured, the WBR-6800 N Wireless 3G Router will obtain and assign IP address
information automatically. Configuration settings can be established through the Web-Based
Configuration Menu.
Open a web browser (Internet Explorer/Firefox/Safari) and type in the IP Address
http://192.168.0.1
Note:
If you have changed the default IP Address assigned to the WBR-6800, ensure you enter the
correct IP Address.
Type in “password” (without quotes) in the Password box, Then click Login
Note: password is the default login password for the unit.
The user can setup step by step to finish the connection with Wizard.
If you are an advanced user, you can access the configurations directly in the Advanced Setup

12
Setup Wizard will guide you through a basic configuration procedure step by step. Press Next to
begin.

13
Once the user finishes those steps and the router screen displayed as below. It means that the
Internet connection is now established.

14
6. Advanced Setup
To access the Advanced Setup, click on Advanced Setup at the top of the page.
Once in the Advanced Setup, you will be presented with the following menu.

15
Basic Setting
These are the basic settings of the unit. Click on the menu on the left to access the respective
settings page.

16
Primary Setup
This page lets you change the LAN (Local Area Network) settings on your WBR-6800 N 3G Wireless
Router and WAN (Wide Area Network) connection.
1. LAN IP Address: The local IP address of this device. The computers on your network must
use the LAN IP address of your product as their Default Gateway. You can change it if
necessary.
2. WAN Type: WAN connection type of your ISP. You can scroll down the box to choose the
most suitable one from the following options:

17
This option is primary to enable this product to work properly. The setting items and the web
appearance depend on the WAN type. Choose correct WAN type before you start.
Static IP Address: ISP assigns you a static IP address.
Dynamic IP Address: Obtain an IP address from ISP automatically.
PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.
PPTP: Some ISPs require the use of PPTP to connect to their services.
L2TP: Some ISPs require the use of L2TP to connect to their services
3G: The WAN type will be changed to 3G automatically, if the wired-WAN is defunct
Static IP Address
WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting
provided by your ISP.
Dynamic IP Address
1. Host Name: Optional. Required by some ISPs, for example: @Home.
2. Renew IP Forever: This feature enables this product to renew your IP address automatically when
the lease time is expiring-- even when the system is idle.
PPP over Ethernet
1. PPPoE Account and Password: the account and password your ISP assigned to you. For security,
this field appears blank. If you don't want to change the password, leave it empty.
2. PPPoE Service Name: Optional. Input the service name if your ISP requires it. Otherwise, leave it
blank.
3. Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session.
Set it to zero or enable Auto-reconnect to disable this feature.
4. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The most common MTU
value is 1492.
5. Connection Control: There are 3 modes to select:
6. Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
7. Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.
8. Manually: The device will not make the link until someone clicks the connect-button in the Staus-
page.

18
PPTP
First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address.
1. My IP Address and My Subnet Mask: The private IP address and subnet mask your ISP assigned
to you.
2. Server IP Address: The IP address of the PPTP server.
3. PPTP Account and Password: The account and password your ISP assigned to you. If you don't
want to change the password, keep it empty.
4. Connection ID: Optional. Input the connection ID if your ISP requires it.
5. Maximum Idle Time: The time of no activity to disconnect your PPTP session. Set it to zero or
enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will
connect to ISP automatically, after system is restarted or connection is dropped.
6. Connection Control: There are 3 modes to select:
7. Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
8. Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.
9. Manually: The device will not make the link until someone clicks the connect-button in the Status
page.
L2TP
First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address.
For example: Use Static
1. My IP Address and My Subnet Mask: The private IP address and subnet mask your ISP assigned
to you.
2. Server IP Address: the IP address of the PPTP server.
3. PPTP Account and Password: the account and password your ISP assigned to you. If you don't
want to change the password, keep it empty.
4. Connection ID: optional. Input the connection ID if your ISP requires it.
5. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or
enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will
connect to ISP automatically, after system is restarted or connection is dropped.
6. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the connect-button in the
Status-page.

19
3G
For 3G WAN Networking. The WAN Fields may not be necessary for your connection. The
information on this page will only be used when your service provide requires you to enter a User
Name and Password to Connect to 3G network. Please refer to your documentation or service
provider for additional information.
1. APN: Enter the APN for your PC card here.
2. Pin Code: Enter the Pin Code for your SIM card.
3. Dial-Number: This field should not be altered except when required by your service provider.
4. User Name: Enter the new User Name for your PC card here.
5. Password: Enter the new password for your PC card here.
6. Primary DNS: This feature allows you to assign a Primary DNS Server (Optional)
7. Secondary DNS: This feature allows you to assign a Secondary DNS Server (Optional)
8. Maximum Idle Time: The Connection will be broken when the idle time arrives

20
Virtual Computers (Only for Static and dynamic IP address WAN type)
Used when WAN is set as DHCP or Static IP, the user can assign a global IP address to a LAN IP
Address.
Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one
mapping of multiple global IP address and local IP address.
Global IP: Enter the global IP address assigned by your ISP.
Local IP: Enter the local IP address of your LAN PC corresponding to the global IP address.
Enable: Check this item to enable the Virtual Computer feature.