Levitaz BOOM Series User manual

FOILBOARDS
USER MANUAL

RELEASE DATE: MARCH 2021
VERSION: GDM001707-ENG-E

THANK YOU FOR CHOOSING LEVITAZ.
FOR THE BEST RIDE YOU NEED THE BEST GEAR. EXPERIENCE
HIGH PERFORMANCE WITH LEVITAZ, AND FIND OUT HOW A
PASSION FOR INNOVATION AND OUR TECHNICAL KNOW-HOW
IN THE FOIL INDUSTRY COMBINE TO PRODUCE SUPERIOR
EQUIPMENT – DESIGNED TO ENABLE RIDERS TO STEP UP
THEIR GAME IN ANY CONDITIONS.
FLY OVER WATER

4
CONTENTS
1 INTRODUCTION......................................................................................... 5
2 WARNING AND SAFETY PRECAUTIONS................................................ 6
3 FOIL BOARD OVERVIEW.......................................................................... 8
4 FOIL BOARD ASSEMBLY........................................................................... 10
4.1 ATTACHING YOUR LEVITAZ FOIL TO YOUR FOIL BOARD
WITH SLIDING TRACK SYSTEM................................................................ 11
4.2 ATTACHING YOUR LEVITAZ FOIL TO YOUR FOIL BOARD
WITH TUTTLE BOX...................................................................................... 13
4.3 FOIL MOUNTING POSITION GUIDE.................................................... 15
4.4 FOOT STRAPS INSTALLATION............................................................ 15
5 MAINTENANCE AND CARE.................................................................... 18
6 PACKAGING AND DISPOSING OF USED PARTS................................ 19
7 REPLACEMENT PARTS.......................................................................... 20
8 SERIAL NUMBER..................................................................................... 20
9 WARRANTY POLICY............................................................................... 21

USER MANUAL FOILBOARDS 5
1 INTRODUCTION
GENERAL INFORMATION
The Levitaz foilboards are for foiling on water only. This manual contains important in-
formation about the proper use of the product and its safety. Follow these instructions
carefully and precisely. This helps to reduce the risk of damage to the product, personal
injury or death.
• This manual is part of the product.
• Keep this manual in a safe place for the entire life of the product.
• If the product is transferred to a new owner, this manual and all associated docu-
ments must be passed on to the new owner.
The meaning and appearance of safety symbols used in this manual are as follows:
NOTICE!
The text after the signal word „NOTICE!“ contains in-
formation, which must be followed to avoid damage
to the product.
WARNING!
The text after the signal word “WARNING!” contains
important information, which must be followed to
avoid serious personal injury or death.
Use of this product and any of its components, as well as hydrofoiling in any type of wa-
ter sports involves certain inherent risks, dangers and hazards. Even if all the following
instructions are followed, the risk of serious injury or death to you or others will not be
eliminated.
Levitaz, a brand of Geislinger GmbH or any of its agents shall not be liable for any loss,
cost, claim, damage, demand or expense you may suff er whatsoever arising as a result
of your actions when using the product.

6
WARNING!
Hydrofoiling in any kind of water sports is inherently a dangerous activity that can
result in serious injury or death to the user or people in the proximity of the user, with
or without a Levitaz product. These risks include drowning or being hit by the product
if the user loses control of it. The product may increase the risk of some injuries to
users or bystanders by adding additional structure to the board that may strike users
or bystanders; by increasing the speed at which the board can be operated, or by
changing the manner in which an out-of-control board reacts as it contacts water or
ground during an out-of-control situation. The user of this product should understand
that the use and participation in the sport and any foiling activity could cause injury or
death to you and/or others around you.
OBSERVE THE FOLLOWING SAFTY STANDARDS WHENEVER USING THIS
PRODUCT:
• Hydrofoiling and kite boarding are dangerous sports.
• Use of this product exposes the user to unexpected and unavoidable risks, dan-
gers and hazards.
• Read the manual for important information about the installation, care and main-
tenance of the board before use.
• Always use extreme caution when using this product.
• Never use this product unless you are in good physical health.
• Never use this product unless you are an experienced swimmer.
• Never act in a careless manner when using this product.
• We do not recommend hydrofoiling in breaking surf.
• Always observe local rules and regulations when using this product.
• Always wear an approved life and protection vest.
• Always wear a suitable helmet.
• This product is designed for use on water only.
• Make sure you take lessons before using this product on the water. Never use
this product in conditions that are above your ability level.
• Surf under control and do not use at speeds that exceed the skills of the rider.
2 WARNING AND SAFETY PRECAUTIONS

USER MANUAL FOILBOARDS 7
• Never use this product in shallow water or near the shore, or near docks, pylons,
swimmers or other activities.
• Do not use this product in thunderstorm and/or lightning conditions.
• The users are responsible for their safety and the safety of those around them.
• Components in this product are subject to the random forces of natural elements
and are subject to irregular wear.
• Only use original Levitaz replacement parts.
• It is the user´s responsibility to inspect equipment for wear before every use.
• It is the user´s responsibility to repair and maintain this product.
• The use of damaged products is not allowed.
• Before riding ensure that the bolts are tightened with the tightening torque that is
described in this manual.
• Geislinger GmbH is not responsible for injuries, death or damage to the product
due to misuse or any use not consistent with these instructions.
• Do not use this product under the infl uence of alcohol, drugs or medications.
• Minimum age of rider: 18 years.
• At temperatures above ≥ 650 °C (1200 °F), decomposition of the carbon fi ber can
cause respirable fi ber particles (WHO-fi bers). Do not inhale combustion gases.
Failure to follow these instructions may increase the risk of serious personal injury or
death, damage to the product or both.

8
3 FOIL BOARD OVERVIEW
1
2
3
6
7
8
1 - Front Foot Strap Inserts for Center Strap (1 angled front foot strap for goofy or regular)
2 - Front Foot Strap Inserts for V-Position (2 front foots straps)
3 - Deck Carrying Handle
4 - Rear Foot Strap Insert
5 - Leash Plug
6 - Bottom Carrying Handle
7 - Sliding Track System
8 - Serial Number
Please note that the Foot Strap Insert position and amount does vary depending on the
model. Not every model is equipped with V-Position Inserts and Center Strap Inserts.
l vtz21BOOM96001
4
5
Drawing for BOOM Board Series:

USER MANUAL FOILBOARDS 9
1
2
3
3
5
6
1 - Front Foot Strap Inserts for V-Strap
2 - Front Foot Strap Inserts for 2 front foots straps
3 - Tuttle Foil Mount Holes
4 - Rear Foot Strap Insert
5 - Tuttle Box
6 - Serial Number
Drawing for RAZE Series with Tuttle Box:
4
4

10
4 FOIL BOARD ASSEMBLY
Please note that the foil system is sold seperatly. For foil assembly please see the Levi-
taz Hydrofoil Manual online at levitaz.com.
NOTICE!
Do not use power tools for the assembly or disas-
sembly process.This may cause serious damage to
the product as control of torque and power is limited.
Doing so will render your warranty void.
NOTICE!
Over tightening screws can cause irreversible dama-
ge to the inserts. Doing so will render your warranty
void.
NOTICE!
Use the Inbus tool provided in the scope of delivery.
Using the wrong tool will damage the screw head
and create sharp edges that will cause harm.
NOTICE!
Ensure that all surfaces are free from dirt or sand pri-
or to the assembly. Pay close attention to the Board
Adapter on the foil system and the board tracks.

USER MANUAL FOILBOARDS 11
Use the four M8 bolts with washers and
T-Nuts for mounting which are supplied in
the accessory bag. Make sure that the se-
quence (bolt head, metal washer, plastic
washer) is correct.
Insert two T-Nuts with its washers and T-
Nuts into each track using the central track
entry points, ensuring the correct T-Nut
orientation is maintained. You may need
to perform some minor adjustments to the
T-Nut alignment in order for the T-Nuts to
locate correctly down into the central track
entry opening.
Slide the T-Nuts with its bolts and washers
towards the ends of the tracks.
4.1 ATTACHING YOUR LEVITAZ FOIL TO YOUR FOIL BOARD
WITH SLIDING TRACK SYTEM
The Levitaz BOOM Foil Boards have a track mounting system to work with the industry-
standard 165 x 90 mm bolt pattern to attach the foil system to the board.
It is very likely that other foil systems on the market will be compatible with your Levitaz
Foil Board. However no guarantees can be given. For best results, we recommend using
your Levitaz Foil Board with the Levitaz Hydrofoil System.

12
Position the mast plate of the assembled
foil in alignment with the tracks on the bot-
tom of the board. The leading edge of the
mast should be pointing towards the nose
of the board.
Slide the four bolts into the open fi xing
points of the mast plate and tighten the
bolts, so that they are still able to slide in
the tracks.
Slide the foil system, together with the loo-
sely tightened bolts and T-Nuts, along the
tracks into your desired position, using the
Foil Mounting Position Guide (chapter 4.3)
as a reference. When you are satisfi ed with
the positioning, tighten all the bolts fi rmly
using the Torx tool in a diagonal sequence
(1►2►3►4) until the foil system is fully
secured and the bolts are fi rmly tight.
(Tightening torque 9 +/- 1 Nm)
1.
3.
2. 4.

USER MANUAL FOILBOARDS 13
NOTICE!
Ensure that you tighten the bolts in a diagonal se-
quence until the foil system is fully secured and the
bolts are fi rmly tight. Tightening with the wrong se-
quence or wrong tightening torque will damage the
tracks and create sharp edges that will cause harm.
4.2 ATTACHING YOUR LEVITAZ FOIL TO YOUR FOIL BOARD
WITH TUTTLE BOX
Care about a safe underground and put
your board with bottom up on it.
Stabilize the board with one foot carefully
or ask somebody to hold your board.
Slide the mast with its tuttle head slowly
into the box while moving the mast from
nose to tail.
The leading edge of the mast should be
pointing towards the nose of the board.

14
NOTICE!
Ensure that you tighten the bolts in an alternating
sequence until the foil system is fully secured and
the bolts are fi rmly tight. Tightening with the wrong
sequence or wrong tightening torque will damage the
boards deck laminate, tuttle box, mast inserts and
create sharp edges that will cause harm.
When the mast has entered approximatel-
ly 90% into its fi nal position, you are ready
to fl ip the board.
Insert the enclosed two M6 counterhead
bolts into the designated holes (see dra-
wing on page 9) and tighten both bolts
fi rmly using the Torx tool in an alternating
sequence until the foil system is fully secu-
red and the bolts are fi rmly tight.
Re-tighten the bolts after a few minutes of
riding, as the mast will have found its fi nal
position inside the tuttle box.
(Tightening torque 9 +/- 1 Nm)

USER MANUAL FOILBOARDS 15
Only for sliding track systems
The further front the foil is mounted the more pressure you will have at your front foot.
For initial installation we recommend to mount the foil in a middle position and slowly
adjust the mounting position to fi nd your preferenced personal setting. You may consider
that diff erent Glider confi gurations require diff erent foil mounting positions.
Basically the more advanced the rider, the more front foot pressure makes sense. Ad-
ditionally the riders weight plays a keyrole for the correct position. Riders < 75 kg (< 165
lbs) might need less front foot pressure why they should position the foil further towards
the tail (-). Heavier riders will be able to control more front foot pressure and should posi-
tion the foil tendencially more to the front (+).
4.3 FOIL MOUNTING POSITION GUIDE
Inventory List
3 pcs Strap
6 pcs Single Washers
6 pcs Self-Tapping Screws
The Levitaz Straps are designed to fi t a range of possible positions allowing you to cus-
tomise your stance position to suit your personal preference and size.
On all Levitaz Foil Boards with strap screw inserts the base spacing between each insert
is 25 mm. For a narrow stance use the innermost screw inserts, for a wider stance move
outwards with a maximum stance option by using the outmost screw insert.
Please note that the Foot Strap scope of delivery does vary depending on the model. Not
every model is equipped with same straps and its accessories.
4.4 FOOT STRAPS INSTALLATION

16
NOTICE!
Do not use power tools for the assembly or disas-
sembly process. This may cause serious damage to
the product as control of torque and power is limited.
Doing so will render your warranty void.
NOTICE!
Tighten the screws fi rmly. Over tightening screws
can cause irreversible damage to the inserts. Doing
so will render your warranty void.
Ensure the straps, board, screw inserts
and screws are free from dirt and sand.
Place the plastic washer under the nylon
cover of the strap and line it with the screw
inserts on the board.
While holding back the nylon cover of the
strap, insert one screw through the plas-
tic washer into the screw insert of your
choice. Tighten the screw fi rmly.
Repeat for remaining strap end using the
dedicated plastic washer, metal washer
and screw.
Use same method as above for the instal-
lation of the remaining straps.

USER MANUAL FOILBOARDS 17
NOTICE!
For multiple asembly in same foot strap insert: Make
sure that you insert the screw into the pre-tapped
threads. The thread of initial mount should always be
reused. Non-observance will cause irreversible da-
mage to the inserts.
Backfoot Strap for Raze series
Insert the enclosed M6 counterhead bolt
through the footstrap into the desired rear
footstrap hole (see drawing on page 9)
and tighten fi rmly using the Torx tool.
Overview of the thread inserts in the mast
and the corresponding holes in the board.
From left to right: Tuttle Foil Mount Hole,
3x Rear Foot Strap Inserts and Tuttle Foil
Mount Hole.

18
NOTICE! Failure to do so may cause serious damage to the
product and void the warranty.
5 MAINTENANCE AND CARE
• Clean your Levitaz board in fresh water after every use.
• Use recommended Levitaz Hydrofoils foot straps and accessories.
• Check your board prior to each use. Ensure that the screws are tight and that there
are no cracks or holes which could compromise your boards structure.
• Do not overtighten screws as they are subject to extreme loads. Screw tightness
should be checked regulary.
• Avoid unnecessary sun exposure to your board.
• Avoid exposure to hot temperatures like inside an unventilated car.
• Store your Levitaz board in a suitable board bag for optimal protection to prevent
from any unnecessary tear and wear.
• Do not place heavy parts on top of the product.
NOT PERMITTED OPTIMAL PERMITTED UP
TO
NOT PERMITTED
< -30 °C (-22°F) -10°C - +25°C
(+14°F - +77°F)
+45°C (+113°F) > 45°C (+113°C)
Storage Temperatures:

USER MANUAL FOILBOARDS 19
6 PACKAGING AND DISPOSING OF USED PARTS
All parts are packed in a cardboard box
• Take the parts out of the box.
• Remove the packing fi lm from the product parts.
• Check the product parts for the completeness of its scope of delivery.
• Check the product parts for possible damage that may have occurred during trans-
portation.
• The cardboard box and PE fi lm can be recycled.
After replacing individual components:
• All metal parts can be recycled (scrap metal).
• The board and straps must be disposed of as residual waste.
Federal, state or local regulations must always be observed when disposing of the pro-
duct or parts thereof.

20
7 REPLACEMENT PARTS
NOTICE!
Use only original Levitaz replacement parts.
Failure to do so may cause serious damage to the
product and void the warranty.
8 SERIAL NUMBER
Boom Board serial number
Each board has an individual Part ID (serial number). On the Levitaz foil boards the
serial number can be found at the tail on the bottom of the board.
Raze Board serial number