Polanik T2-S410 User manual

TECHNICAL SPECIFICATION
INSTRUCTION MANUAL
Pole vault stand position board
T2-S410
File:2016-08-11
WSPARCIE TECHNICZNE
Paweł Ciechanowski
[e-mail]

Technical specification / Instruction manual T2-S410 2
I. General description and use
The T2-S410 board is used during pole vault competitions to inform about chosen by an athlete distance
between a stand and a landing area.
Main features:
Innovative construction –consist of parts easy to assembly, transport and store.
Simple operating –possibility of fast assembly and easy setup required distance on digital plastic
units
High durability and quality –all metal elements are made of aluminium powder painted steel.
Other elements and digital plastic units are made of high class, weatherproof material.
Possibility of exchange used elements

Technical specification / Instruction manual T2-S410 3
II. Technical specification
Code
T2-S410
Type
2-digits
Number of components
3
Board
Waterproof, foamed PVC with thickness 10mm
Numeric units
Plastic, switched manually, easy to replace
Supporting structure
Steel, powder painted, two-segment post with synthetic connector, rotation 360°, blocked
in desired position with hand wheel
Base
Steel, powder painted
Weight [kg]
~20

Technical specification / Instruction manual T2-S410 4
III. Parts/sets list
Item
Part/set description
Q-ty
pcs
Part/set sketch
1
Round base
S-0028-000-00-01-02
1
2
Clamping ring with constant
tube
S-271-02-00
1
3
Backing plate with
rotary tube with bell
S-246-03-00
+
Pole vault board with brackets
and digital plastic units
S-0410-000-04-00-00
1

Technical specification / Instruction manual T2-S410 5
IV. Assembly
The pole vault stand position board T2-S410 is delivered partially disassembled. The sequence of the assembly
operations is described in this manual. Assembly starts with setting the base.(item 1). Then screw down the
clamping ring with the constant tube(item 2) to the base, using screws(item 6) and washers (item 5).
Afterwards put backing plate with rotary tube(item 3) and factory installed subassembly of pole vault stand
position board wind speed with brackets and digital plastic units(item 4) on the clamping ring with the constant
tube (item 2).
The T2-S410 pole vault board is ready to use.
V. Operating and maintenance
Attention !
Digital plastic units have self-locking handles to move numbers. While setting the distance do not move more
than 2-3 digits –it will provide failure-free and long lasting operating.
After each use the product should be cleaned and stored in a dry, roofed place. Dirt remove with moist
cloth and mild detergent. Damages of protective coating fill with metal paint.
Even the best technical solutions cannot substitute for common sense. The usage of the product must take
place under the supervision of sports facility technical staff. The producer shall not be liable for any incidents
caused by the improper assembly or misuse of pole vault stand position board T2-S410.
VI. Packing and transport
The product is packed in box with dimensions 1500 x 500 x 230 [mm].

Technical specification / Instruction manual T2-S410 6
VII. Declaration
1) No. 2016-08-11
2) Issuer’s name: POLANIK
Issuer’s address: Życzliwa 11, 97-300 Piotrków Tryb.
3) Objects of declaration
4) Technical specification described above is in accordance with the factory’s internal engineering standards.
Additional Information
5) Declaration for:
Buyer/Distributor/User
Signed for and in behalf for:
POLANIK Spółka z Ograniczoną Odpowiedzialnością
2016-08-11 Piotrków Tryb.
(Date and place of issue)
Paweł Ciechanowski
Product Manager
6) ……………………………………… ……………………………………………………………………………
(Name, function) (Signature or equivalent authorized by the issuer)
No.
Name
Code
1
Pole vault stand position board
T2-S410