Levoit Premier 100 User manual

Aroma Diuser
Model: Premier 100
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
USER MANUAL

2
Thank you for purchasing the
PREMIER 100 AROMA
DIFFUSER BY LEVOIT.
If you have any questions or concerns, please
We hope you enjoy your new aroma diuser!
Share the Levoit Love
Find @LevoitLifestyle on social media for
wellness + style inspiration. We make every
space mindful and chic.
@LevoitLifestyle
#LevoitLove • #LevoitLifestyle

3
Table of Contents
Package Contents
Specifications
Important Safety Information
Getting to Know Your Aroma Diuser
Getting Started
Using Your Aroma Diuser
Keeping Things Clean
Troubleshooting
Warranty Information
Customer Support
3
3
4
5
6
7
8
9
10
11
Package Contents
1 x Aroma Diuser
1 x Water Cup
1 x Brush
1 x Splash Guard
1 x Power Adapter
1 x User Manual
Specifications
Rated Power DC 24V, 12W
Adapter Rated Power Input: AC 100–240V, 50/60Hz
Output: DC 24V, 0.5A
Capacity 0.3 qt / 300 mL
Mist Output High: Max 50 mL/hr
Low: Max 20 mL/hr
Operating Time 6–14 hr
Note: The diuser will be able to run for a longer or shorter time
depending on the environmental temperature and humidity.
Ultrasonic Frequency 2.4MHz
Dimensions Diameter: 5.9 in / 15 cm
Height: 8.6 in / 21.8 cm

4
IMPORTANT SAFETY INSTRUCTIONS
• Closely supervise children near the diuser.
• Unplug when not using.
• Do not cover the mist tube while the diuser is on. This may damage the diuser.
• Do not place the diuser near heat sources or under direct sunlight.
• Do not handle the power adapter with wet hands. Keep the power adapter away
from liquids.
• Do not place foreign objects into the diuser.
• Do not use attachments that are not recommended by Levoit for the diuser.
• If the mist produces a bad or unusual smell, turn o the diuser immediately.
• Keep away from electrical appliances that may be damaged by humidity.
• Do not immerse the diuser base or power adapter in water.
• Drain water from the base away from the air outlet. Always keep water out of the air outlet.
• If the diuser is damaged or is not functioning properly, stop using it and contact
Customer Support (see page 11).
• Not for commercial use. Household use only.
WARNING – When using electric products, always follow basic precautions, including
the following. Read all instructions before using.
READ AND SAVE THESE
INSTRUCTIONS

5
GETTING TO KNOW YOUR AROMA DIFFUSER
A. Mist Tube
B. Cover
C. Ambient Light
D. Air Outlet
E. Base
F. ON Indicator Light
G. Mist Level Button
H. Timer Button
I. Light Button
Underside
Inside
J. Timer Indicator Lights
K. DC Socket
L. Air Inlet
M. Splash Guard Slot
N. Transducer
O. Water Cup
P. Brush
Q. Splash Guard
O
F
G H I P
Q
L
D
E
J
K
A
N
M
B
C

6
GETTING STARTED
1. Before first use, clean the diuser (see
page 8) and install the splash guard.
Remove the diuser cover and place the
splash guard into the splash guard slot.
[Figure 1.1 - 1.3].
Note:
• Use with essential oils and water. Never use
essential oils without water.
• Only use with natural essential oils.
Synthetic essential oils may damage
the diuser.
Figure 1.4
Figure 1.3
Figure 1.2
Figure 1.1
Note: Keep mist away from walls, furniture,
and appliances to prevent them from
getting wet.
Note: The splash guard helps prevent water
from splashing out of the diuser when the
cover is taken o.
Note: If you use water-soluble essential oil
with lower concentration, the aroma will be
very light.
2. Place the diuser on a level, elevated,
and water-resistant surface, such as a
table or nightstand.
Max Line
3. Attach the power adapter to the DC
socket base, then plug into an outlet.
4. Remove the cover from the base. Use the
included cup to fill the inside of the base
with cold or room temperature distilled
water (below 104°F / 40°C). Do not fill
above the “MAX” line. [Figure 1.4]
5. Add 1–2 drops of essential oil per 100 mL
(approx. ½ US cup) of water, based on
your preference.
6. Put the cover back on the base.

7
1. Press once. The diuser will start
on the low mist level, and the ON light will
turn on.
2. Press again to use the high mist
level. The ON light will blink twice, then
remain on.
3. Press a third time to turn misting o.
The ON light will turn o.
USING YOUR
AROMA DIFFUSER
• Press several times to cycle through
timer lengths (1, 3, and 6 hours) and to turn the
timer o.
• The diuser will turn o at the end of the timer.
• The timer will only be used when mist is
turned on.
When the diuser turns o, it will remember your
mist and light settings when turned back on.
Note:
• If there is no water in the base, the diuser
will not turn on and the ambient light will blink
red. Add water.
• To avoid spills, place the diuser on a stable,
level surface where it will not be overturned.
• Avoid removing the cover while the diuser
is running.
Mist Level
Timer
Memory Function
1. After turning on the diuser, press
once to turn on the ambient light. The
light will automatically cycle through color
and brightness settings (see Light Chart,
page 8).
Press and hold for several seconds to turn
the diuser o.
Turning the Diffuser Off
Light
2. Press a second time to lock a color
on the ambient light. The first color will be
white at 50% brightness.
3. Press again to switch to the next color
and brightness setting. The color will be
locked. Pressing repeatedly will cycle
color and brightness settings in the order
listed in Light Chart. After cycling through
all colors, pressing will turn the light
ring o. Pressing again will turn on
Automatic Color Cycle Mode.
4. Press and hold to turn the ambient light
o. The ambient light will remember your
last setting when turned back on, unless
the diuser is unplugged.
Note: controls the ambient light, not the mist.

8
Light Chart
* Note: Only used when manually cycling
through colors
KEEPING
THINGS CLEAN
Note:
• Do not allow any water to get into the air
outlet or DC socket.
• Clean the diuser once every other day.
• To avoid unusual smells, clean the diuser if
you change the type of oil being diused.
Cleaning
Storage
1. Unplug the power adapter and take o
the cover.
2. Drain any remaining water from the
diuser.
3. Clean the cover and the inside of the
diuser with warm water and a
non-corrosive detergent.
4. Use the included cleaning brush to
remove scale buildup inside the diuser.
5. Wipe with a cloth and rinse all parts.
6. Always allow all parts to completely air
dry before using or storing.
Note: Do not wash base directly under tap. Do
not immerse the diuser in water.
If not using the diuser regularly, store in a cool,
dry place. Do not store diuser with water in it.
Order Color, Brightness
1White, 50% Brightness
2White, 100% Brightness
3Red, 50% Brightness
4Red, 100% Brightness
5Yellow, 50% Brightness
6Yellow, 100% Brightness
7Green, 50% Brightness
8Green, 100% Brightness
9Light Blue, 50% Brightness
10 Light Blue, 100% Brightness
11 Deep Blue, 50% Brightness
12 Deep Blue, 100% Brightness
13 Purple, 50% Brightness
14 Purple, 100% Brightness
15 O*
16 Automatic Color Cycle Mode*

9
TROUBLESHOOTING
Problem Possible Solution
No mist comes out. Make sure the diuser is plugged in. Press to turn the diuser on.
Add water to the diuser.
The diuser may have overheated. Turn o the diuser and place in a
well-ventilated area away from sunlight for 10 minutes to cool.
Diuser produces
an unusual smell.
If the diuser is new, clean it thoroughly (see page 8). Use after
air drying.
Clean the diuser if you’ve changed the type of oil being diused.
Water may be dirty or may have been sitting in the diuser for a long
period of time. Clean the diuser (see page 8) and refill with clean water.
If synthetic essential oils were diused, clean the diuser (see page 8)
and use natural essential oils instead.
Water leaks from
the diuser.
Make sure the cover is securely placed on the base.
The temperature or humidity of the environment may be too high. Move
the diuser to a well-ventilated area.
Mist output is
abnormal.
There may be too much water in the diuser. Make sure water level is
below the “MAX” line.
Clean the diuser (see page 8).
There may not be enough water in the diuser. Add water.
If your problem is not listed, please contact Customer Support (see page 11).

10
Terms & Policy
Arovast Corporation warrants all products to be of
the highest quality in material, craftsmanship, and
service, eective from the date of purchase to the
end of the warranty period.
Arovast Corporation will replace any product
found to be defective due to manufacturer flaws
based on eligibility. Refunds are available within
the first 30 days of purchase. Refunds are only
available to the original purchaser of the product.
This warranty extends only to personal use and
does not extend to any product that has been
used for commercial, rental, or any other use for
which the product is not intended. There are no
warranties other than the warranties expressly set
forth with each product.
This warranty is non-transferrable. Arovast
Corporation is not responsible in any way for any
damages, losses, or inconveniences caused by
equipment failure or by user negligence, abuse,
or use noncompliant with the user manual or any
additional safety or use warnings included in the
product packaging and manual.
This warranty does not apply to the following:
• Damage due to abuse, accident, alteration,
misuse, tampering, or vandalism.
• Improper or inadequate maintenance.
• Damage in return transit.
• Unsupervised use by children under 18 years
of age.
Arovast Corporation and its subsidiaries assume
no liability for damage caused by the use of the
product other than for its intended use or as
instructed in the user manual. Some states do not
allow this exclusion or limitation of incidental or
consequential losses so the foregoing disclaimer
may not apply to you. This warranty gives you
specific legal rights and you may also have other
rights which may vary from state to state.
ALL EXPRESSED AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Additional 1-Year Warranty
You can extend your 1-year warranty by an
additional year. Log onto www.levoit.com/warranty
to register your new product for the extended
warranty.
Please fill out all required fields and include your
order ID, place of purchase, and purchase date, if
applicable.
Defective Products & Returns
If you discover your product is defective within the
specified warranty period, please contact Customer
your invoice and order ID. DO NOT dispose of your
product before contacting us. Once our Customer
Support Team has approved your request, please
return the product with a copy of the invoice and
order ID.
Product Name Aroma Diuser
Model Premier 100
Default Warranty
Period
1 year
For your own reference, we strongly recommend
that you record your order ID and date of
purchase.
Date of Purchase
Order ID
WARRANTY INFORMATION

11
CUSTOMER SUPPORT
If you encounter any issues or have any
questions regarding your new product, feel
free to contact our helpful Customer Support
Team.
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Email: [email protected]
Toll-Free: (888) 726-8520
Customer Support
Mon–Fri, 9:00 am–5:00 pm PST/PDT
Support Hours
*Please have your order invoice and order ID
ready before contacting Customer Support.

NOTES

NOTES


15
Connect with us @LevoitLifestyle

levoit.com
JJ_0819_CC_ M1.1_0719Premier100
Other manuals for Premier 100
1
Table of contents
Other Levoit Accessories manuals
Popular Accessories manuals by other brands

NATURE & DECOUVERTES
NATURE & DECOUVERTES 15198550 user manual

ASTRO-PHYSICS
ASTRO-PHYSICS Mach1GTO manual

Alpha
Alpha Alpha CombiMax Installation and servicing instructions

Big Country
Big Country OSTRICH WING AWNING Fitting instructions

Omron
Omron E2Q2 datasheet

Hamilton Beach
Hamilton Beach 74250 - ELECTRIC KNIFE COLOR manual