Levoit OasisMist1000S User manual

Levoit OasisMist1000S Smart Ultrasonic
Cool Mist Tower Humidifier
Questions or Concerns?
Please contact us MonFri, 9:00 am5:00 pm PST/PDT
at [email protected] or at [phone].
USER MANUAL

2
Table of Contents
Package Contents
Specifications
Safety Information
Getting to Know Your Smart Humidifier
Controls
Remote Control
Getting Started
VeSync App Setup
Using Your Smart Humidifier
Care & Maintenance
Troubleshooting
VeSync App Troubleshooting
Warranty Information
Customer Support
1 ×Smart Ultrasonic Tower Humidifier
3 ×Aroma Pad (1 Pre-Installed)
2 ×Cleaning Brush
1 × Screwdriver
4 ×Screw
1 ×Stand
1 ×Cable Winder
1 ×Remote Control
1 ×Quick Start Guide
1 ×User Manual
2
2
3
6
8
9
9
11
12
16
21
24
26
27 Specifications
Package Contents
Model LUH-M101S-WUS
Power Supply AC 120V, 60Hz
Rated Power 27.5W
Water Tank
Capacity 2.6 gal / 10 L
Max Mist
Ouput 350 mL/h
Max Runtime
100 hours on low mist
setting
Note: The humidier may
run for a longer or shorter
time depending on the
environmental temperature
and humidity.
Noise Level < 28dB
Eective
Range 300–600 ft² / 27–55 m²
Dimensions 8.4 x 10.0 x 28.7 in /
21.4 x 25.3 x 72.8 cm
Weight 6.4 lb / 2.9 kg
Note: To access additional smart humidier
functions, download the free VeSync app
(see page 11).

3
SAFETY INFORMATION
• Only use the humidifier as described
in this manual.
• Place the humidifier and cord so that
it will not be knocked over. Do not
place near large pieces of furniture or
in high-trac areas.
• When not in use, turn the humidifier
o and disconnect from power by
removing the plug from the outlet.
• Do not use the humidifier in wet
environments.
• Keep the humidifier out of reach from
children.
• Do not open the base or remove the
water level sensor for self-servicing.
• Always unplug your humidifier from
the power outlet before cleaning your
humidifier or detaching the humidifier
base from the water tank.
• Always make sure to place the
humidifier on a flat, level surface
before operation.
• Only fill the water tank with clean
water. Never fill the water tank with
any other liquids.
• Do not place the humidifier near
sources of heat, such as stovetops,
ovens, or radiators.
• Do not use other items as
replacement parts for this product.
To reduce the risk of fire, electric shock, or other injury, follow all instructions
and safety guidelines.
General Safety
• Do not cover the nozzle while
the humidifier is on. Doing so may
damage the humidifier.
• Do not immerse the humidifier base,
power cord, or plug in water.
• If the humidifier is damaged or is
not functioning properly, stop using
it and contact Customer Support
immediately (see page 27).
• This humidifier is not to be used by
persons (including children) with
reduced physical, sensory, or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Supervise children when they are
near the humidifier.
• Children should not clean
or perform maintenance on
the humidifier without supervision.
• Children should be supervised to
ensure that they do not play with the
humidifier.
• Not for commercial use. Household
use only.
READ AND SAVE THESE
INSTRUCTIONS

4
Power & Cord
Electromagnetic Fields (EMF)
• Ensure that the plug fits properly
into a polarized socket.
• Your humidifier has a polarized
plug (one prong is wider than the
other), which fits into a polarized
outlet only one way. This is a
safety feature to reduce the risk of
electric shock. If the plug does not
fit, reverse the plug. If it still does
not fit, do not use the plug in that
outlet. Do not bypass this safety
feature.
• Do not handle the power cord or
plug with wet hands. Keep the plug
and power cord away from liquids.
• If the power supply cord is
damaged, it must be replaced by
Arovast Corporation or similarly
qualified persons in order to avoid
an electric or fire hazard. Please
contact Customer Support (see
page 27).
• Unplugging the power cord
will disable remote control of
the humidifier and temporarily
disconnect the humidifier from
VeSync and other third-party apps.
This humidifier complies with all
standards regarding electromagnetic
fields (EMF). If handled properly and
according to the instructions in this
user manual, the appliance is safe
to use based on scientific evidence
available today.
Swallowing can lead to chemical burns,
perforation of soft tissue, and death.
Severe burns can occur within 2 hours
of ingestion. Seek medical attention
immediately.
SAFETY INFORMATION (CONT.)
• Only add essential oils to
the aroma pad.
• Do not add essential
oils, supplemental water
treatment liquids, or water
filters into the water inlet
tank, base chamber, or
water tank.
Caution: Risk of Leaks
and Electric Shock
• Place sticky tape around both sides
of the battery and dispose of it
immediately in an outdoor trashcan
or recycle safely;
• Store spare batteries securely;
• Empty recycling units on a regular
basis;
• Use non-transparent containers to
keep the batteries out of view.
This product contains a coin/button
battery.
WARNING: CHEMICAL
BURN HAZARD.
KEEP OUT OF REACH
OF CHILDREN.

5
These sorts of symptoms vary or
fluctuate, with the pain increasing and
then subsiding.
A specific symptom to button and coin
battery ingestion is vomiting fresh (bright
red) blood. If a child does this, seek
immediate medical help.
The lack of clear symptoms is why it is
important to be cautious with “flat” or
spare button or coin batteries in the home
and the products that contain them. Even
used cells may cause injury.
Unfortunately, it is not obvious when
a button or coin battery is stuck in a
child’s esophagus (food pipe). The
child might:
SAFETY INFORMATION (CONT.)
• Cough, gag or drool a lot;
• Appear to have a stomach upset or
a virus;
• Be sick;
• Point to their throat or stomach;
• Have pain in their abdomen, chest,
or throat;
• Be tired or lethargic;
• Be quieter or more clingy
than usual or otherwise “not
themselves”;
• Lose their appetite or have a
reduced appetite;
• Not want to eat solid food / be
unable to eat solid food.

6
GETTING TO KNOW YOUR SMART HUMIDIFIER
A. Top Cover
B. Nozzle
C. Muer
D. Mist Tube
E. Water Inlet Tank
F. Base Chamber
G. Control Panel
H. LED Display
I. Humidifier Base
J. Aroma Pad
K. Aroma Box / Air Inlet
L. Handles
M. Water Tank
N. Water Level Window
O. Power Cord
P. Cable Winder (Behind)
Q. Stand
Inside Water Tank
R. Silicone Tube
S. Filter
Inside Base Chamber
T. Overflow Valve
U. Water Inlet
V. Air Outlet
W. Pump Cover
X. Water Level Sensor
Y. Transducer
Water Inlet Tank
(Upside Down)
Base Chamber
(Top View)
A
C
B
L
R
S
U
V
X Y
M
F
Q
O
D
K
J
E
N
T
G
H
I
W

7
Auto Mode Indicator
Mist Level Indicators
Mist Level
Button
Mist Level
Indicators
Auto Mode
Button
Auto Mode
Indicator
Sleep Mode
Button
Sleep Mode
Indicator
On/O
Button
Power
Indicator
Mist Level Indicators
Low Mist
Medium Mist
High Mist
GETTING TO KNOW YOUR SMART HUMIDIFIER (CONT.)
Wi-Fi® Indicator
No Water Indicator
Relative Humidity (RH)
Percentage
Sleep Mode
Indicator

8
CONTROLS
On/O Button
• Tap to turn the humidifier on/
o.
Mist Level Button
• Tap repeatedly to cycle
through mist level settings:
low, medium, and high mist.
• Press and hold for 3 seconds
to turn the display o. Tap any
button (except ) to turn
the display back on.
Auto Mode Button
• Tap to turn Auto Mode on
(see page 12).
• Tap / to turn Auto
Mode o and resume manual
controls, or tap for Sleep
Mode.
Sleep Mode Button
• Tap to turn Sleep Mode on/o
(see page 13).
Wi-Fi Indicator
• Turns on, o, or blinks to
indicate pairing status. See
the VeSync in-app instructions
for more information.
No Water Indicator
• Blinks when there is no water
in the tank. After this indicator
blinks 10 times, the humidifier
will turn o. Refill the tank to
resume using your humidifier.
• Lights up when the humidifier
base is removed. Remains on
until the humidifier base is
replaced.
Note: You can also use the VeSync app to control these functions, as well as additional
app-only features (see page 11).
Note: During rst use, the
humidier may take 10–25
seconds to start misting.
• Press and hold for 5 seconds
to pair with the VeSync app.
See the in-app instructions for
more information.
• Press and hold for 15 seconds
to reset the humidifier. This will
restore the humidifier’s default
settings and disconnect it from
Wi-Fi® and the VeSync app
(see page 11).

9
GETTING STARTEDREMOTE CONTROL
1. Remove all packaging.
2. Flip the water tank over. Use the
screwdriver to attach the stand to the
water tank with the 4 included screws.
[ Figure 1.1 ]
3. Take out the filter from inside the water
tank. Remove the foam around the filter.
4. Place the humidifier base on the water
tank.
5. Optionally, peel o the sticker cover on
the cable winder and attach the cable
winder to the back of the humidifier base.
6. Choose a hard, flat location for the
humidifier at least 12 inches / 30 cm away
from any walls. The surface must be water-
resistant. [ Figure 1.2 ]
Figure 1.2
Note: Do not overtighten the screws.
Note: Placing the humidier away from walls
ensures that the humidity sensor and air inlets
function properly.
Note:
• Remove the plastic tab from the remote
control’s battery compartment before using.
• To replace the battery, see page 20.
On/O
Button
Mist
Level
Button
Humidity
Level
Button
Sleep
Mode
Button
Timer
Button
Auto Mode
Button
Display O
Button
The remote control can be used to control
any of the humidifier’s functions from a
distance. The remote must be within 16 ft /
5 m of the humidifier to work.
Display O Button
• Press to turn the humidifier display o.
• Press any button to turn the display
back on.
Humidity Level Button
• Press to set a target humidity level from
40–80% that’s used with Auto Mode.
• Continue pressing to cycle through target
humidity options in increments of 10%.
Timer Button
• Press to cycle through timer options from
1–12 hours.
• Press and hold to quickly cycle through
options in increments of 1 hour.
Figure 1.1
12 in /
30 cm

10
Filling & Refilling
Figure 1.4 Figure 1.5
Figure 1.3
Figure 1.6
Note: Make sure the water tank is clean before
lling.
1. Remove the top cover. [Figure 1.4 ]
2. Use a pitcher or bottle to fill the water
inlet tank with room-temperature water.
You can also add water directly to the
water tank. [ Figure 1.5 ]
7. Mist should be directed away from walls,
furniture, bedding, and appliances.
[ Figure 1.3 ]. Avoid letting too much mist
fall on the side of the humidifier with the
aroma box, as this may interfere with the
sensor inside the aroma box.
Note:
• We recommend using puried or distilled
water to ll the tank.
• Do not ll with hot water.
• Using tap water may result in a white dust
(dried minerals) on surfaces.
3. Use the water level window to see how
much of the tank is filled. Do not fill past
the max line or water may overflow out
of the vents in the handles.
4. Replace the top cover. [ Figure 1.6 ]
GETTING STARTED (CONT.)
Figure 1.7
• Do not remove the water inlet tank
during filling.
• Only add water into the water inlet tank
or water tank. Do not add water directly
into the base chamber or mist tube.
• Do not add essential oils into the
humidifier. Only add essential oils to the
aroma pad. [ Figure 1.7 ]
CAUTION
• Do not use water treatment liquids or
third-party water filters in this humidifier.

11
VESYNC APP SETUP
1. To download the VeSync app, scan
the QR code or search “VeSync” in the
Apple App Store® or Google Play Store.
Note: Due to ongoing updates and improvements,
the VeSync app may be slightly dierent than
shown in the manual. In case of any dierences,
follow the in-app instructions.
Note: You must create your own VeSync
account to use third-party services and
products. These will not work with a guest
account. With a VeSync account, you can
also allow your family and friends to control
your smart humidier.
Note: For Android™ users, choose “Allow” to
use VeSync.
Wi-Fi Connection
• To disconnect Wi-Fi, press and
hold for 15 seconds until the Wi-Fi
indicator turns o. This will restore the
smart humidifier's default settings and
disconnect it from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for
adding a device.
2. Open the VeSync app. If you already
have an account, tap Log In. To create a
new account, tap Sign Up.
3. Follow the in-app instructions to set up
your smart humidifier.
Note:
• You can use the VeSync app to connect
your smart humidier to Amazon Alexa
or Google Assistant™. Follow the in-app
instructions to connect VeSync to your
voice assistant.
• Your phone must have Location turned
on while your phone is connecting to
your smart humidier. This is required to
establish the Bluetooth® connection. You
can turn Location o after your smart
humidier is nished connecting to
the VeSync app.

12
USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier. The indicators
on the display will light up for 1 second,
then turn o.
2. Tap to turn your humidifier on. The
humidifier will start misting.
Note: Using the VeSync app allows you to control
your smart humidier remotely and access additional
functions and features (see page 11).
Note: You can also set the humidier to
automatically stop misting when the room
reaches a specic humidity level (see Auto
Mode, page 12).
Auto Mode
Figure 2.1
Figure 2.2
Note:
• During rst use, the humidier may take
10–25 seconds to start misting.
• If there is no water in the tank, will
ash 10 times, and the humidier will
turn o. Fill the water tank (see Getting
Started, page 9).
Note:
• Direct the nozzle away from any
furniture, walls, or other objects to
prevent them from getting wet.
• Do not inhale the mist directly from the
nozzle.
3. Tap repeatedly to cycle through
mist settings: Low, Medium, and High.
[ Figure 2.1 ]
4. Rotate the nozzle to adjust the direction
of the mist. [ Figure 2.2 ]
5. Optionally, use the controls or the
VeSync app to turn on Auto Mode,
activate Sleep Mode, and more (see
Controls, page 8).
6. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it o.
A comfortable humidity level is between
40–60%.
7. Tap to turn your humidifier o.
Low Mist
Medium Mist
High Mist
Auto Mode uses the humidifier’s sensor
to automatically adjust the mist level to
maintain a target humidity level. The default
target humidity level is 60%.
Note: The humidier will automatically mist
for 15 seconds after being turned on, even
if the room has reached the target humidity
level.
1. Tap to turn Auto Mode on.
2. By default, Auto Mode uses Automatic
Stop. The humidifier will stop misting
when the highest target humidity level is
reached (default 60%).

13
Room
Relative Humidity *
Automatic
Mist Level
Under 50% High
50–55% Medium
55–60% Low
Over 60% Automatic Stop
Setting Target Humidity
You can set a target humidity level from
40–80%, in increments of 10%. There are
several ways to change the target humidity:
*If you change the target humidity from
60%, the humidity percentages will change
accordingly.
• Change the target humidity in the
VeSync app.
• Press on the remote control.
Continue pressing to cycle through
target humidity options.
• Tap to turn Sleep Mode on/o.
• When Sleep Mode is on, you can
tap any button to wake up the
display. If you stop touching the
display, the display will turn o
again after 6 seconds.
• Once you wake up the display, tap
any button again to exit Sleep Mode
and resume manual controls.
• To turn o the display, press and
hold for 3 seconds, or press
on the remote control.
• To turn the display back on, tap any
button.
• Press and hold on the control
panel until the display flashes and
shows the target humidity. Continue
tapping to cycle through target
humidity options.
3. The humidifier will continue detecting
the humidity level in the room. It will
start and stop misting again according
to the following table:
AUTO MODE (CONT.)
Note:
• In the VeSync app, you can turn
Automatic Stop on/o.
• If Automatic Stop is o, the humidier will
keep running on low mist level when the
highest target humidity level is reached.
Sleep Mode
Turning Off the Display
Sleep Mode changes the humidifier’s mist
setting to low and turns o the display lights.
The display will automatically dim after 3
seconds of inactivity.

14
• If turned o and unplugged, the
humidifier will remember your
settings for Sleep Mode, Mist Level,
and Wi-Fi, and will resume those
settings when turned back on.
• If turned o and plugged in, the
humidifier will remember your
settings for Auto Mode, Sleep
Mode, Mist Level, and Wi-Fi, and will
resume those settings when turned
back on.
Using the Aroma Box
Memory Function
Automatic Shutoff
Your humidifier can be used for
aromatherapy.
1. Push the aroma box at the back of the
base and pull it out. [ Figure 3.1 ]
Figure 3.1
Figure 3.2
Figure 3.3
Note: Do not add essential oils, water
treatment liquids, or third-party water lters
into the water inlet tank, base chamber, or
water tank. Only add essential oils to the
aroma pad. [ Figure 3.3 ]
• The aroma pads can be cleaned and
reused after diusing essential oils (see
Cleaning the Aroma Pad, page 19).
• The aroma is intended to be light.
• For information on replacement aroma
pads, see page 19.
The humidifier will automatically turn o
when all of the water in the tank has been
diused. will show on the display and
blink 10 times before the humidifier turns
o. Fill the water tank (see Getting Started,
page 9).
If the humidifier base has been removed
from the water tank, the humidifier will
automatically stop misting. will show on
the display and will turn o once the base is
placed properly back on the water tank.
2. Put 8–10 drops of essential oils on the
aroma pad. [ Figure 3.2 ]
3. Insert the aroma box back into the
humidifier.
4. Turn on the humidifier. The humidifier will
automatically diuse aroma when used.

15
VeSync App Functions
Important Tips
Your humidifier must have the correct level
of water in the base chamber to work
properly. If there is too much water in the
base chamber, the humidifier cannot create
mist.
The VeSync app allows you to access
additional smart functions, including those
listed below.
Note: The VeSync app is continually updated
and app features will expand.
• Do not place the humidifier on an
inclined surface.
• Do not add water directly into the
base chamber or mist tube. Only
add water to the water inlet tank
or directly into the water tank. The
humidifier will automatically deliver
the correct amount of water into the
base chamber.
• Do not remove the water inlet tank
during filling.
Remote Control From Your Phone
• Turn the humidifier on/o.
• Cycle through mist levels.
• Turn Auto Mode on/o.
• Set a target humidity level.
• Turn Sleep Mode on/o.
• Turn the display lights on/o.
Monitor Humidity Levels
• Check current humidity levels in the
humidifier’s environment.
Set Timers & Schedules
• Program individual timers or create a
schedule for your smart humidifier.
Third-Party Voice Control
• Compatible with Amazon Alexa and
Google Assistant™ for voice commands.
Figure 4.1
• Avoid moving or shaking the
humidifier. [ Figure 4.1 ] This may
cause the water tank pump to
deliver too much water into the base
chamber or reduce the amount of
water in the base chamber.
• Before moving the humidifier, turn it
o and unplug it.

16
Figure 5.1
Figure 5.2
Figure 5.3
Figure 5.4
Figure 5.5
CARE & MAINTENANCE
Note:
• All maintenance should be done on a water-
resistant surface.
• Change the water daily to avoid bacteria
growth.
• Use a tissue or cloth to clean the nozzle
regularly.
• If not using the humidier for 1 week or longer,
do not leave water inside. Clean and dry the
humidier instead.
Note:
• Never immerse the base in water or liquid.
Do not place any part of the humidier in a
dishwasher.
• Do not use detergents to clean the humidier.
Cleaning
You should clean your humidifier water inlet
tank, base chamber, and water tank every 3
days, and when you’re ready to store it.
1. Unplug the humidifier.
2. Remove and rinse the water tank cover.
[ Figure 5.1 ]
3. Remove the water inlet tank from the
humidifier base. [ Figure 5.2 ]
4. Pull the mist tube from the narrow end
to remove it. [ Figure 5.3 ]
5. Flip the water inlet tank over and remove
the muer. [ Figure 5.4 ]
6. Rinse the water inlet tank, mist tube, and
muer.
7. Remove the humidifier base and pour
out any water. Pour from the corner of
the base chamber to prevent water from
damaging the humidifier. [ Figure 5.5 ]

17
Descaling Your Humidifier
1. Remove the humidifier base from the
water tank.
2. Fill the water tank with 6 US cups / 1,420
mL of distilled white vinegar. [ Figure 6.1 ]
CARE & MAINTENENCE (CONT.)
Figure 5.6
Figure 6.1
Figure 6.2
Figure 6.3
Figure 5.7
To descale the humidifier (remove mineral
buildup):
3. Fill the base chamber with 1 US cup
/ 240 mL of distilled white vinegar
[ Figure 6.2 ]
4. Carefully swish the vinegar around
the tank and base chamber. Do not
allow liquid to contact the air outlet.
[ Figure 6.3 ]
8. Use a small brush to clean the base
chamber. Rinse with room-temperature
water.
Note: Do not allow water to contact the
air outlet, aroma box, or underside of the
humidier base.
Note: Do not remove the silicone tube from
the water tank.
9. Pour out any water in the water tank. Use
a brush to clean the inside of the tank,
then rinse with room-temperature water.
[ Figure 5.6 ]
10. Pull to remove the filter from the silicone
tube. Wash the filter with water and a soft
cloth. [ Figure 5.7 ]
11. Dry all parts with a cloth. Make sure
all parts are completely dry before
reassembling or storing.
6 cups
1 cup

18
Figure 6.5
Figure 6.6
Figure 6.7
Figure 6.8
Figure 6.4
DESCALING YOUR HUMIDIFIER (CONT.)
5. Allow the parts to soak for 15–20
minutes. Vinegar will loosen scale
(mineral buildup) in the tank and base
chamber. [ Figure 6.4 ]
6. Pour out the vinegar. [ Figure 6.5 ]
7. Use a soft cloth and cleaning brush to
remove scale from all parts. [ Figure 6.6 ]
8. Pull to remove the filter from the silicone
tube. Place the filter in a container and
fill with enough vinegar to cover the
filter. Soak for 1 hour. [ Figure 6.7 ]
9. Rinse all parts until any vinegar smell is
completely gone. [ Figure 6.8 ]

19
If the aroma pad is sti even after cleaning,
then it needs to be replaced. Extra pads are
included with the humidifier.
To maintain the performance of your
humidifier, only use ocial Levoit aroma
pads. For more information, contact
Customer Support (see page 27).
Cleaning the Aroma Pad Replacing the Aroma Pad
1. Pull out the aroma box and remove the
aroma pad. [ Figure 7.1 ]
Figure 7.1
Figure 7.3
Figure 7.2
2. Rinse the pad under warm, running
water. [ Figure 7.2 ]
3. Dry the pad with a clean cloth.
4. Place the aroma pad back into the
aroma box. [ Figure 7.3 ]
Note: Do not use liquid cleaners or
detergents to clean the pad or any other part
of the humidier.
Reassembling
1. Push the filter back onto the silicone
tube. Place the filter in the water tank.
[ Figure 8.1 ]
2. Replace the mist tube on the water inlet
tank. [ Figure 8.2 ]
Figure 8.2
Figure 8.1

20
Replacing the Remote Control
Battery
1. Follow the cleaning instructions (see
page 16) and allow all parts to dry
completely before storing.
2. Wrap the power cord around the cable
winder.
3. Store in a cool, dry location.
1. Remove the battery compartment by
pinching the tab in and pulling the
compartment out. [ Figure 9.1 ]
2. Remove the old battery
3. Replace with a new 3V CR2025 battery.
Make sure the polarities match.
4. Replace the battery compartment.
Storing
3. Flip the water inlet tank over and
replace the muer. [ Figure 8.3 ]
Figure 9.1
Figure 8.3
4. Place the water inlet tank in the
humidifier base and replace the top
cover.
5. Place the humidifier base properly on
the water tank.
6. Refill the tank, if necessary.
REASSEMBLING (CONT.)
Pinch
Pull out