Levoit Classic 300S User manual

VeSync Classic 300S
Ultrasonic Smart Humidifier
Model: Classic 300S
Questions or Concerns?
Please contact us at [email protected].
USER MANUAL

2
Table of Contents
Package Contents
Specifications
Safety Information
Getting to Know Your Smart Humidifier
Controls
Getting Started
VeSync App Setup
Using Your Smart Humidifier
Care & Maintenance
Troubleshooting
VeSync App Troubleshooting
Warranty Information
Customer Support
3
3
4
5
7
8
10
11
15
20
22
24
24
EN • ENGLISH
Inhaltsverzeichnis
Lieferumfang
Technische Daten
Sicherheitshinweise
Ihr Smart-Luftbefeuchter
Bedienelemente
Erste Schritte
Einrichten der VeSync-App
Der Gebrauch Ihres Smart-Luftbefeuchters
Pflege und Wartung
Problemlösung
VeSync App Problembehebung bei Fehlern
Garantie
Kundendienst
25
25
26
27
29
30
33
34
38
43
46
48
48
DE • DEUTSCHE
Índice
Contenido de la caja
Especificaciones
Información de seguridad
Componentes del humidificador inteligente
Controles
Primeros pasos
Configuración de la aplicación VeSync
Uso de su humidificador inteligente
Cuidado y mantenimiento
Solución de problemas
Solución de problemas de la aplicación
VeSync
Información sobre la garantía
Atención al Cliente
49
49
50
51
53
54
57
58
62
67
69
71
71
ES • ESPAÑOL
FR • FRANÇAIS
Table des matières
Contenu de l’emballage
Caractéristiques techniques
Consignes de sécurité
Prise en main de votre humidificateur
intelligent
Commandes
Prise en main
Configuration de l’application VeSync
Utilisation de votre humidificateur intelligent
Nettoyage et maintenance
Dépannage
Dépannage de l’application VeSync
Informations relatives à la garantie
Service client
72
72
73
74
76
77
80
81
85
90
92
94
94
Indice
Contenuto della confezione
Specifiche
Informazioni di sicurezza
Componenti dell’umidificatore smart
Comandi
Preparazione
Configurazione dell’app VeSync
Utilizzo dell’umidificatore smart
Cura e manutenzione
Risoluzione dei problemi
Risoluzione dei problemi dell’app VeSync
Informazioni sulla garanzia
Assistenza Clienti
95
95
96
97
99
100
103
104
108
113
115
117
117
IT • ITALIANO

1 ×Smart Ultrasonic Humidifier
3 ×Aroma Pads (1 PreInstalled)
2 ×Water Filter Sponges (1 Pre-Installed)
1 ×Cleaning Brush
1 ×User Manual
1 ×Quick Start Guide
Specifications
Package Contents
Power Supply AC 220240V, 50/60Hz
Rated Power 26W
Water Tank Capacity 6 L / 1.32 gal
Max Run Time
Up to 60 hours on low mist setting
Note: The humidier may run for a longer or shorter time
depending on the environmental temperature and humidity.
Noise Level ≤ 30dB
Eective Range 2047 m² / 215505 ft²
Dimensions 24.5 × 19.2 × 34 cm / 9.6 × 7.5 × 13.4 in
Weight 2 kg / 4.3 lb
WiFi® Frequency Range 24122472MHz
E.I.R.P.: 18.0dBm
Bluetooth® Frequency Range 24022480mHz
E.I.R.P.: 8.0dBm
Note: To access additional smart humidier functions, download the free VeSync app (see page 10).
ENGLISH
User Manual
VeSync Classic 300S Ultrasonic Smart Humidifier
Model: Classic 300S
EN
3

SAFETY INFORMATION
• Only use the humidifier as described in
this manual.
• Place the humidifier and cord so that it
will not be knocked over. Do not place
near large pieces of furniture or in high-
trac areas.
• When not in use, turn the humidifier o
and disconnect from power by removing
the plug from the outlet.
• Do not use the humidifier in wet
environments.
• Keep the humidifier out of reach from children.
• Do not open the base or remove the water
level sensor for self-servicing.
• Always unplug your humidifier from the
power outlet before cleaning your humidifier
or detaching the water tank from the
humidifier base.
• Always make sure to place the humidifier
on a flat, level surface before operation.
• Only fill the water tank with clean
water. Never fill the water tank with
any other liquids.
• Do not place the humidifier near sources of
heat, such as stovetops, ovens, or radiators.
• Do not place the humidifier directly on
floors, carpets, or rugs.
• Do not use other items as replacement
parts for this product.
To reduce the risk of fire, electric shock, or other injury, follow all instructions and
safety guidelines.
General Safety
• Do not cover the nozzle while the
humidifier is on. Doing so may damage
the humidifier.
• Remove the water tank from the base
before moving the humidifier.
• Do not immerse the humidifier base,
power cord, or plug in water.
• Do not handle the power cord or plug
with wet hands. Keep the plug and
power cord away from liquids.
• If the humidifier is damaged or is not
functioning properly, stop using it and
contact Customer Support immediately
(see page 24).
• Not for commercial use. Household use only.
Do not add essential oils, supplemental
water treatment liquids, or water filters
into the water tank or base chamber.
This will damage the humidifier and
cause leaks. Only add essential oils to
the aroma pad.
Caution: Risk of Leaks and
Electric Shock
READ AND SAVE THESE
INSTRUCTIONS
EN
4

GETTING TO KNOW YOUR SMART HUMIDIFIER
A. Nozzle
B. Water Tank Cover
C. Dust Cover
D. Mist Tube
E. Water Tank
F. Night Light
G. Base
H. Display
I. Cleaning Brush
J. Max Water Line Tank
K. Water Tank Handles
L. Water Filter
M. Power Cord
N. Float
O. Float Brackets
P. Aroma Box
Q. Aroma Pad
R. Max Water Line Base
S. Secondary Float
T. Transducer
U. Air Outlet
V. Air Inlet
W. Humidity Sensor
X. Feet
Y. Water Outlet Valve
Assembly
Z. Water Outlet Valve
AA. Night Light Cover
AB. Noise Silencer
AC. Tank Placement Sensor
A B
M
AB
H
K
L
X
W
T
U
S
R
J
D
AC
N
F
G
E
C
I
O
P
Q
V
Water tank, upside down
Z
Y
AA
EN
5

A. Sleep Mode Button
B. WiFi® Indicator
C. Humidity Level
D. Timer Indicator
Note: The timer must be
set in the VeSync app.
E. Mist Level Button
F. Night Light Button
G. No Water Indicator
H. Mist Level Indicator
I. Power Button
Getting To Know Your Smart Humidifier (cont.)
A B DC
F G H I
E
EN
6

CONTROLS
Note: You can also control these functions using
the VeSync app, as well as additional functions
(see page 12).
Power Button
• Press to turn the humidifier
on/o.
• Press and hold for 5
seconds to pair with the
VeSync app. See the
VeSync in-app instructions
for more information.
• Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier’s default
settings and disconnect
it from WiFi® and the
VeSync app (see page 10).
Sleep Mode Button
• Press to turn Sleep Mode
on/o (see page 12).
Night Light Button
• Press repeatedly to cycle
through night light settings:
50%, 100%, and O.
• Press and hold for 3
seconds to turn the display
and the night light o.
• Press and hold for 3
seconds during Sleep
Mode to turn Sleep
Mode o.
Mist Level Button
• Press repeatedly (or press
and hold to cycle through
mist level settings: Auto
Mode, Low, Medium, and
High. For more details on
Auto Mode, see page 12.
• Press during Sleep Mode
to turn Sleep Mode o.
The humidifier will keep
misting on Auto Mode.
EN
7

GETTING STARTED
1. Remove all packaging.
2. Take the water tank o of the base and
remove all tape, including any tape on
the float. [Figure 1.1]
Figure 1.3
Figure 1.1
Figure 1.4
Figure 1.2
30 cm /
12 in
30 cm /
12 in
3. Clean the water tank and water tank
cover before first use.
Note: Check to make sure that the water
lter is correctly in place. If not, then rotate
the lter clockwise to secure it in place.
[Figure 1.2]
4. Choose a hard, flat location for the
humidifier at least 30 cm / 12 inches
away from any walls. The surface
must be water-resistant. [Figure 1.3]
5. Mist should be directed away
from walls, furniture, bedding,
and appliances. [Figure 1.4]
EN
8

Filling & Refilling
1. Remove the water tank cover by holding
the nozzle and pulling upward.
[Figure 1.5]
Figure 1.5
Figure 1.6
2. Use the handles to remove the tank
from the base. Fill the tank with room-
temperature water. [Figure 1.6]
Do not fill with hot water.
Do not fill past the tank’s max water line.
Note:
• We recommend using puried or distilled
water to ll the tank.
• Do not ll past the tank’s max water line.
Figure 1.7
Figure 1.8 Figure 1.9
• Do not add water directly into the base
chamber. [Figure 1.7]
CAUTION
• Do not add water through the mist tube.
• Do not add essential oils into the
humidifier. [Figure 1.8]Only add
essential oils to the aroma pad.
[Figure 1.9]
• Do not use water treatment liquids or
third-party water filters in this humidifier.
Note: Make sure the water tank is clean
before lling.
EN
9

Figure 1.10
Figure 1.11
Note: Make sure the nozzle on the water
tank cover is placed over the mist tube, or the
humidier may not work correctly. [Figure 1.11]
Filling & Refilling (cont.)
3. Replace the water tank cover and place
the tank back on the base. [Figure 1.10]
Note: Due to ongoing updates and
improvements, the VeSync app may be slightly
dierent than shown in the manual. In case of any
dierences, follow the in-app instructions.
Note: For Android™ users, choose “Allow” to
use VeSync.
Note: You must create your own VeSync account
to use third-party services and products. These
will not work with a guest account. With a VeSync
account, you can also allow your family and
friends to control your smart humidier.
Note: You can use the VeSync app to connect
your smart humidier to Amazon Alexa or
Google Assistant™. Follow the in-app instructions
to connect VeSync to your voice assistant.
1. To download the VeSync app, scan the QR
code or search “VeSync” in the Apple App
Store® or Google Play Store. [Figure 2.1]
VESYNC APP SETUP
2. Open the VeSync app. If you already have
an account, tap Log In. To create a new
account, tap Sign Up.
3. Follow the in-app instructions to set up your
smart humidifier.
Wi-Fi Connection:
• To disconnect Wi-Fi, press and hold
for 15 seconds until the Wi-Fi
indicator turns o. This will restore the
smart humidier’s default settings and
disconnect it from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for
adding a device.
Figure 2.1
EN
10

USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier. Press to turn
your humidifier on.
2. Tap repeatedly to cycle through mist
settings: Auto Mode, Low, Medium, and
High. [Figure 3.1]
3. Rotate the nozzle to adjust the direction
of the mist. [Figure 3.2]
4. Optionally, use the controls to activate
Sleep Mode, turn the night light on/o,
and more (see Controls, page 7).
5. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it
o. A healthy humidity level is between
40% and 50%. [Figure 3.3]
6. Press to turn your humidifier o.
Figure 3.1
Figure 3.2
Figure 3.3
Note: If there is no water in the tank or the tank is
removed, the humidier will stop misting, will
ash 10 times, and the humidier will turn o. Rell
the tank and properly place it on the base to use
your humidier.
Note: Using the VeSync app allows you to control
your smart humidier remotely and access additional
functions and features (see page 12).
Note: You can also use Auto Mode to keep the
humidity level between 40% and 50%.
Note: If there is no water in the tank, will ash
10 times, and the humidier will turn o. Fill the
water tank (see Getting Started, page 8).
Note:
• The humidier will not mist in Auto Mode
if the humidity level is above 50%. If
you want the humidier to keep misting,
change the mist setting, or change the
Auto Mode settings in the VeSync app.
• For more information about Auto Mode,
see page 12.
EN
11

Auto Mode
Sleep Mode
Auto Mode uses the humidifier’s sensor to
automatically adjust the mist level (or turn it
o) to maintain a comfortable and healthy
level of humidity.
• Auto Mode automatically adjusts the
mist level to maintain 40–50% relative
humidity. You can change the target
humidity level in the VeSync app.
• By default, Auto Mode uses Automatic
Stop. The humidifier will stop misting
when the highest target humidity level is
reached. If the humidity drops below the
target humidity level, the humidifier will
begin misting again.
• In the VeSync app, you can turn
Automatic Stop on/o. If Automatic Stop
is o, the humidifier will keep running on
Low mist level when the highest target
humidity level is reached.
• If Auto Mode is selected when the
humidity is higher than the target
humidity range, the humidifier will not
start misting until the humidity lowers.
Sleep Mode changes the humidifier’s mist
setting to Auto Mode, turns o the display
lights, and turns o the night light.
• When Sleep Mode is on, you can press
to turn the night light on/o. The
humidifier will stay in Sleep Mode.
Note: The VeSync app is continually updated
and app features will expand.
The VeSync app allows you to access
additional smart functions, including those
listed below.
Remote Control
• Turn the humidifier on/o from your phone.
• Cycle through mist levels and turn
on/o Auto Mode and Sleep Mode
from your phone.
• Turn the display lights and night light
on/o from your phone.
• Customise Auto Mode settings like
target humidity and auto-o.
Monitor Humidity Levels
• Check current humidity levels in the
humidifier’s environment.
Set Timers & Schedules
• Program individual timers or create a
schedule for your smart humidifier.
Third-Party Voice Control
• Compatible with Amazon Alexa and
Google Assistant™ for voice commands.
VeSync App Functions
EN
12

Figure 3.4
Figure 3.5
Figure 3.6
Important Tips
Your humidifier must have the correct level of
water in the base chamber to work properly. If
there is too much water in the base chamber,
the humidifier cannot create mist.
• Never pour water directly into the
base chamber. [Figure 3.4]Only add
water to the water tank. The humidifier
will automatically release the correct
amount of water into the base chamber.
• Avoid moving or shaking the humidifier.
[Figure 3.5]This may cause the water
tank to release too much water into the
base chamber.
• Before moving the humidifier, turn it o,
unplug it, and remove the water tank.
• If your humidifier doesn’t produce mist
correctly, check the max water line to
see if there is too much water in the
base chamber. Pour out extra water if
water is over the max line. [Figure 3.6]
Note: The max water line is only for this purpose.
Do not pour water into the base chamber.
EN
13

Using the Aroma Box
1. Push the aroma box at the back of the
base and pull it out. [Figure 3.7]
Your humidifier can be used for
aromatherapy.
Figure 3.8
Figure 3.7
2. Put 8–10 drops of essential oil on the
aroma pad. [Figure 3.8]
3. Place the aroma box into the humidifier.
4. Turn on the humidifier. The humidifier will
automatically diuse aroma when used.
Note:
• Do not add essential oils, water treatment
liquids, or third-party water lters into the
water tank or base chamber. Only add
essential oils to the aroma pad.
• The aroma pads can be cleaned and reused
after diusing essential oils (see Cleaning the
Aroma Pad , page 18).
• The aroma is intended to be light. This
humidier is not an aroma diuser.
EN
14

Figure 4.1
Figure 4.2
Figure 4.3
Figure 4.4
CARE & MAINTENANCE
Note:
• All maintenance should be done on
a water-resistant surface, such as a
kitchen counter.
• Change the water daily to avoid
bacteria growth.
• Use a tissue or cloth to clean the
nozzle regularly.
• If not using the humidier for 1 week
or longer, do not leave water inside.
Clean and dry the humidier instead.
Note: When pouring out water, hold
down the oat to ensure that it does
not fall out of the base chamber.
Note:
• Never immerse the base in water or liquid.
Do not place any part of the humidier in
a dishwasher.
• Do not use detergents to clean the humidier.
Cleaning
You should clean your humidifier every
week, and when you’re ready to store it.
1. Unplug the humidifier.
2. Remove and rinse the water tank cover.
[Figure 4.1]
4. Remove the water tank from the base
and pour out any water from the tank
and base chamber. [Figure 4.3]
5. Remove the water filter from the tank
by rotating it anticlockwise and lifting
it out. [Figure 4.4]
3. Remove and rinse the dust cover if
necessary. [Figure 4.2]
EN
15

6. Rinse the tank, water filter, and base
chamber with room temperature water.
[Figure 4.5]
Figure 4.6
Figure 4.5
7. To descale the humidifier:
a. Remove the water filter from the
tank by rotating it anticlockwise
and lifting it out. [Figure 4.6]
c. Replace the tank cover and swish
the vinegar around the tank.
[Figure 4.8]
d. Place the tank on the base and
soak for 15–20 minutes. Vinegar
will drain into the base chamber
and loosen scale (mineral buildup)
in the tank and in the base
chamber (including the transducer
and float). [Figure 4.9]
Figure 4.7
Figure 4.8
Cleaning (cont.)
Figure 4.9
b. Fill the tank with 710 mL /
3 US cups of distilled white
vinegar. [Figure 4.7]
EN
16

Figure 4.11
Figure 4.12
Figure 4.13
Figure 4.14
g. Remove the float from the base
chamber by pulling up the larger
side of the float [Figure 4.12]and
pulling the shaft out from the float
brackets. One side of the float
brackets is open (U-shaped) to
allow the shaft to be removed.
[Figure 4.13]
f. Flip the tank over and remove
the noise silencer. To remove the
noise silencer, press the release
tab and gently pull away from the
humidifier. [Figure 4.11]
h. Place the float, water filter, and
noise silencer in a small container.
Fill with enough vinegar to cover
them. Soak for 15–20 minutes.
[Figure 4.14]
e. Remove the tank, remove the tank
cover, and pour out any vinegar.
[Figure 4.10]
Cleaning (cont.)
Figure 4.10
EN
17

Figure 4.15
Figure 4.16
i. Use a soft cloth and the included
cleaning brush to remove scale
from all parts. [Figure 4.15]
j. Rinse all parts until any vinegar
smell is completely gone.
[Figure 4.16]
Cleaning (cont.)
8. Dry all parts with a cloth. Make sure
all parts are completely dry before
reassembling or storing.
Cleaning the Aroma Pad
1. Press the aroma box to release it from
the base, and pull it out. [Figure 4.17]
Note: Do not pour liquid cleaners or detergents
into the aroma pad or box.
2. Remove the aroma pad and rinse under
warm, running water. [Figure 4.18]
3. Dry with a clean cloth and place it back
into the aroma box. [Figure 4.19]
Figure 4.17
Figure 4.18
Figure 4.19
EN
18

Reassembling
1. Flip the water tank over and place
the noise silencer back into the tank.
[Figure 4.20]
2. Place the water filter back into the tank
and rotate it clockwise to secure it in
place. [Figure 4.21]
Figure 4.20
Figure 4.21
Figure 4.22
c. Place the larger prong into
the open (U-shaped) side of
the float brackets.
4. Place the tank back on the base.
Refill the tank, if necessary.
5. Place the tank properly on the base and
place the tank cover on the water tank.
b. Insert the smaller prong into the
closed side of the float brackets.
[Figure 4.23]
Figure 4.23
Storing
Follow the cleaning instructions (see page
15) and allow all parts to dry completely
before storing. Store in a cool, dry location.
3. Place the float back into the base chamber:
a. Make sure the correct side of the
float is facing up. [Figure 4.22]
EN
19

Problem Possible Solution
Humidifier doesn’t turn on, or
turns o unexpectedly.
Plug in the humidifier and turn it on.
Add purified or distilled water to the water tank.
Check to see if the humidifier is in Auto Mode. Depending on
Auto Mode settings, the humidifier may automatically turn o
when the humidity level is above the target level.
Little or no mist comes out.
Turn the mist level to a higher setting.
Fill the water tank.
There may be too much water in the base chamber. Empty the
base chamber. Refill the water tank (not the base chamber) and
place the water tank properly onto the base.
Make sure the air inlet on the bottom of the base is not blocked.
The humidifier should not be set on carpet or other surfaces that
may block the air inlet.
Make sure the nozzle is not blocked or clogged.
Make sure the humidifier is on a level surface.
The water temperature may be too low. Turn the mist level to
the highest setting and let the humidifier run for a while, then
adjust to the desired setting.
If the water tank or base was washed with detergent, rinse
thoroughly with clean water to remove any detergent.
Clean the water filter (see page 15) or replace it with a new
one. To request a new water filter, contact Customer Support
(see page 24).
Humidifier uses water too quickly.
The humidifier uses up water based on the environmental
temperature and humidity. If your environment is cold and/or
dry, the humidifier will run out of water faster.
Humidifier produces an unusual
smell.
If the humidifier is new, unplug and rinse all parts, then place in a
cool, dry place for 12 hours.
If essential oils were placed on the aroma pad, rinse the pad under
clean water and allow it to dry.
Clean the water tank and base chamber (see Care &
Maintenance, page 15).
White dust appears around the
humidifier.
We recommend using purified or distilled water to fill the
humidifier. Avoid using water with high mineral content.
Clean the humidifier (see Care & Maintenance, page 15).
TROUBLESHOOTING
EN
20