Levoit Aura Sensor User manual

Aura™ Sensor
USER MANUAL
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
at [email protected] or at [phone].
Model: LTM-AS041S-WUS

2
Table of Contents
Package Contents
Specifications
Safety Information
Getting Started
Operation
VeSync App Setup
Connecting the sensor to the VeSync app
VeSync App Functions
Maintenance
Troubleshooting
Warranty Information
Customer Support
2
3
6
11
16
16
17
18
20
22
29
34
Package Contents
1 x Aura Sensor
1 x Wall Bracket
1 x Desktop Stand
2 x AAA Battery (Pre-Installed)
1 x User Manual

3
Specifications
Battery 2 x 1.5V AAA Batteries
Power Supply 3V⎓
Dimensions 2.40 x 1.84 x 0.86 in /
6.10 x 4.67 x 2.18 cm
Weight 0.15 lb / 0.07 kg
Connectivity Zigbee™ 3.0
Temperature
Display Range
32°–122°F / 0°–50°C
Temperature Display Accuracy:
±1°F during 32°–122°F
±0.5°C during 0°–50°C
Temperature
Increments
0.1°F / 0.1°C

4
SPECIFICATIONS (CONT.)
Relative Humidity
Display Range
1–99%
Humidity Display Accuracy:
±3% during 20–80% humidity
±5% during 0–99% humidity
Relative Humidity
Increments
1%
Max Connectivity
Distance
Indoor: 164 ft / 50 m
Outdoor: 492 ft / 150 m
Note: Outdoor distance is
measured in a straight line without
obstacles.
FCC ID (Inside Battery
Compartment)
2ARBY-AS041S

5
SPECIFICATIONS (CONT.)
Compatibility
• Levoit Aura™ Smart Thermostat
Note: To access additional smart functions, download the free
VeSync app (see page 16).

6
SAFETY INFORMATION
READ AND SAVE THESE
INSTRUCTIONS
Please read and follow all instructions and safety guidelines in this manual.
• Keep out of reach of children.
• Do not tamper with the sensor’s internal components.
• Do not dispose of any part of the sensor in a fire.
• Do not submerge or place the sensor in direct contact with water
or any other liquid.
• Not for commercial use. Household use only.
General Safety

7
• When installing or changing batteries, make sure to place the batteries
in the correct polarity.
• Using batteries that are not alkaline may shorten the operating time of
the sensor.
• Do not mix new and old batteries.
• Do not replace batteries while hands are wet or while the sensor is in
a wet environment.
• If the sensor is not in use for an extended period of time, remove the
batteries to conserve battery life and extend sensor lifetime.
Use & Care
SAFETY INFORMATION (CONT.)

8
A. Battery Compartment B. FCC ID and 4-Digit
Code (Inside Battery
Compartment)
C. Wall Bracket D. Desktop Stand
Function Diagram
FCC ID:2ARBY-AS041S
4-Digit Code:XXXX
FCC ID:2ARBY-AS041S
4-Digit Code:XXXX

9
Connectivity
Signal
Battery Level
Temperature
Humidity
Percentage
Humidity
Comfort Level
Display Diagram

10
DISPLAY DIAGRAM (CONT.)
Connectivity Signal
Humidity Comfort Level
is displayed when the sensor is connected to the Aura Smart
Thermostat.
Displays Comfort, Low, or High depending on the humidity that’s
detected by the sensor.
Note: You must first connect the sensor to the VeSync app in
order to pair it with the smart thermostat (see Connecting the
sensor to the VeSync app, page 17).
Comfort The humidity is between 40% and 60%
Low The humidity is below 40%
High The humidity is above 60%