Lexicon 300 V3.0 - GUIDE REV 1 User manual

300 V 3.0 Quick Reference Guide
300 DIGITAL EFFECTS SYSTEM
MIDI
48 kHz
44.1 kHz
32 kHz
CONTROL
UP
PAGE
DOWN
789
456
123
—0
ENTER
PAGE
SETUP
SELECT
MACH
STORE
VALUE
SETUP
EDIT
EFFECT
EDIT
MOD
EDIT
BYPASS
A
BYPASS
B
POWER
LEVEL
Once you have made changes to an Effect, remember that
you must not only store those changes in Effect Edit mode,
but also must store the Setup in which the Effect is loaded.
Note: If the 300 Copy Tools function is set to DISABLE, no STORE
functions can be performed.This function is enabled in CNTRL mode.
(Selection of CNTRL does not interrupt audio operation of the 300.)
Storing your changes
Editing an Effect
Single Setup Presets
P118 Stairwell
P119 *Hangar
P120 MarbleFoyer
P121 EarlyReflect
P122 Lecture Hall
P123 *CarInterior
P124 Score Stage
P125 Gate It!!
P126 *Rich Plate
P127 Glossy Plate
P128 Warm Plate
P129 Perc Plate
P130 Contem-Plate
P131 *EKO Plate
P132 Bright Plate
P133 *Round Plate
P134 StereoAdjust
P135 Phase Invert
P136 2 Frame Dly
P137 3 Frame Dly
P138 4 Frame Dly
P139 MS Decode
P140 *MultiEchoes
P141 LFO Panner
P142 Telephone
P143 *Stereo Shift
P144 Octave Down
P145 Vox Chorus
P146 Pole Flange
P147 Bulkie Roll
P148 Heavy Roll
P149 *Going, Going
P150 Zorch!
P101 Large Hall
P102 Medium Hall
P103 Small Hall
P104 *Church
P105 *Rooms
P106 RehursalRoom
P107 *Chamber
P108 LiveDrumRoom
P109 *Studio A
P110 *Studio B
P111 *Brick Wall
P112 *Deep End
P113 Oil Tanker
P114 *Synth Hall
P115 Dance Hall
P116 *Ambience
P117 In A Room
Setup Selection
The Setup Presets are or-
ganized as follows:
101-150 = Single Setups
201-225 = Dual Mono Setups
301-325 = Cascade Setups
To simplify the choice
among the many possible
effect and system routings,
the 300 is shipped with 100
Setup Presets.
The 300 is organized into Setups and Effects. Setups are
collectionsofmanydecisions,includingDSProuting(singleor
split), Input levels, Source, Balances, LFO Rate and Shape,
and one (or two) Effects. These decisions are grouped to-
gether, named, and stored so they can be called up with a
single user action.
V3.0 Setups The 300 V3.0 factory default state is: Analog In; 48kHz sampling rate.
Single Setups
All Single Setup Presets are
factoryloaded withan Effect
of the same name. (The Ef-
fect number may not be the
same.)
Single Setups unify both
Machine A and Machine B
into a single DSP engine.
An asterisk (*) in a Preset
name indicates that one or
more parameters are
patched to the Soft knob.
Turn the Soft knob to in-
crease or decrease the pa-
rameter value.
Press VALUE to alternate
between a display of pa-
rameter names and a dis-
play of their values.
L
R
Analog
Digital
Analog
Level Analog Balance
Σ
L
R
Digital
Level Digital Balance
Σ
Overall
Mix
Dry
Dry Analog and
Digital Out
Effect
Edit A
Press SETUP SELECT,
then use the Soft knob to
select a Setup Preset.
WhenyouhavefoundaPre-
set you want to load, press
ENTER.Press
PAGEUP todisplay
any Soft knob patches
made to Setup Effect para-
meters; press VALUE to
showtheparametervalues.
Press EFFECT EDIT .
Press the buttons above or
below a parameter label to
select it.
Press PAGE DOWN to view
additional parameter pages;
press EFFECT EDIT to re-
turn to the main edit screen.
From Effect Edit mode,
press STORE . Turn the
Soft knob to find an avail-
able register, then press
STORE again.
From Setup Edit mode,
press STORE . Turn the
Soft knob to find an avail-
able register, then press
STORE again.

300 V 3.0 Quick Reference Guide
Copyright © 1997 Lexicon Inc. All rights reserved. Printed in U.S.A.
Dual Mono Setups (201-
225)loadone effectinto Ma-
chineA(leftout)andoneinto
Machine B (right out).
Dual Mono Setup Presets
Setup Preset Mach A Effect Mach B Effect Setup Preset Mach A Effect Mach B Effect
Cascade Setups (301-325)
also load two effects: one is
loaded into Machine A, then
the audio from Machine A is
passed to Machine B.
Cascade Setup Presets
Setup Preset Effects loaded into Mach A and Mach B Setup Preset Effects loaded into Mach A and Mach B
Editing Effects in Machine A and Machine B
Lexicon Part No. 070-09683 Rev 1
P201 Rev/Rev 701 Chamber 702 Key Chamber
P202 Rev/Dly 703 Drum Chamber 607 LFO:FazeDlys
P203 Rev/Pch 705 Guitar Room 802 Guit Shift
P204 Rev/Comp 707 “U”Chamber 901 EZ Comp2:1
P205 Dly/Dly 609 Chorus 612 Chorus+EKOz
P206 *Dly/Pch 601 *Dual Delays 804 Sky Down
P207 Dly/Comp 602 Space Delays 902 DrumComp3:1
P208 *Pch/Pch 803 *Up Shift 806 Echo down
P209 Pch / Comp 810 Vocal Shift 902 DrumComp3:1
P210 Comp/Comp 901 EZ Comp 902 DrumComp3:1
P211 Slow Spin 607 LFO:FazeDlys 609 Chorus
P212 WideFlang 605 OverTheTop1 606 OverTheTop2
P213 X-Traffic 612 Chorus+EKOz 610 *Sky Delays
P214 *GearUp 803 *Up Shift 805 Env*EKOShift
P215 TwoRooms 715 Joe's Garage 709 Basement
P216 TwoHalls 720 Recital Hall 710 Big Hall
P217 *Verbs 717 *Drum Rooms 711 *Great Room
P218 *RevPan 707 “U”Chamber 708 *’L’Chamber
P219 Up&Down 807 HalfStepsUp 808 HalfStepsDn
P220 MyGuitar 802 Guit Shift 614 Env:Peak
P221 EnvSpooge 614 Env:Peak 608 Env:Phazer
P222 Flng&Dlys 616 Negative Flang 602 Space Delays
P223 *Dly Daze 604 *3VoiceDlys 603 *PingoPongo
P224 Clusters 612 Chorus+EKOz 604 *3Voice Dlys
P225 2 Flanges 606 OverTheTop2 804 Sky Down
3 Oak Park • Bedford MA 01730-1441 • Tel: [phone] • Fax: [phone]
P301 Rev->*Dly 701 Chamber 601 *Dual Delays
P302 *Dly->*Rev 601 *Dual Delays 714 *Joe's B&G
P303 Rev->Pch 707 “U”Chamber 802 Guit Shift
P304 Pch->Rev 804 Sky Down 703 Drum Chamber
P305 Rev->Comp 705 Guitar Room 901 EZ Comp 2:1
P306 Comp->Rev 902 Drum Comp 3:1 709 Basement
P307 Dly->Pch 609 Chorus 801 Mono Shift
P308 Pch->*Dly 810 Vocal Shift 603 *PingoPongo
P309 *Dly->Comp 604 *3Voice Dly 901 EZ Comp 2:1
P310 Comp->*Dly 901 EZ Comp 2:1 613 *Wall Slaps
P311 Pch->Comp 802 Guit Shift 901 EZ Comp 2:1
P312 *SurrVerb 720 Recital Hall 010 *Small St Adj
P313 *V3Comp 010 *Small St Adj 901 EZ Comp 2:1
P314 V3Chamber 701 Chamber 001 PONS+Dither
P315 *SpaceOut 711 *Great Room 604 *3Voice Dlys
P316 *JetVerb 712 *Great Hall 616 NegativeFlng
P317 BigBricks 713 Big Bricks 902 Drum Comp 3:1
P318 Rev->EKOz 710 Big Hall 612 Chorus+EKOz
P319 Rev->Korus 706 Big & Short 609 Chorus
P320 Over!Top 605 OverTheTop1 606 OverTheTop2
P321 GuitarXP 611 LFO:Pan&Faze 607 LFO:FazeDlys
P322 *EKO->Faze 805 Env*EKOShift 608 Env:Phazer
P323 Verb->Down 720 Recital Hall 806 Echo Down
P324 *The Sky 804 Sky Down 610 *Sky Delays
P325 Spinola 609 Chorus 011 Panola
Toselectasplitsetup,press
SETUP SELECT, use the
Soft knob to select a Setup
Preset numbered 201-325,
then press ENTER.
Split Setups
The300hasmanyfeatureswhicharenotdescribedhere,suchastheabilitytotriggersetup, effect
and parameter changes based on a Time code Event List, Dynamic MIDI® functions, and more.
Forcompleteinformationonthese,andotherfeatures,pleasereadthe300V3.0Owner'sManual.
L
Analog
or
Digital
R
A
Balance
B
Balance
A
Level
B
Level
A
Mix
B
Mix
L
Out
R
Out
Patch Points
Patch Points
Dry
Dry
Effect
Edit A
Effect
Edit B
Input
Level Input Balance
L
Analog or
Digital
R
Patch Points
Σ
Dry
Σ
Feedback
L
Out
R
Out
Patch Points Feedback
Dry
A
Mix B Mix Overall
Mix
Effect
Edit A Effect Edit B
Press EFFECT EDIT .
Press the buttons above or
below a parameter label to
select it for Soft knob ad-
justment.
Press VALUE to display pa-
rameter values. Press
MACH to toggle between
Machines A and B.
STORE your changes as described on the previous page. If
you'vechangedparametersinbothmachines,youwillhaveto
perform a STORE operation for each effect. After the first
effect is stored, press MACH and store the other, then store
the Setup.