Lexus IS 250 User instructions

IS 250/350
Lexus Personalized Settings
Your vehicle includes a variety of electronic features that can be programmed to your
preferences. Programming of these features is performed once at no charge by your
Lexus Dealer provided you obtain the service at the 6 month/5,000-mile scheduled
maintenance service.
It is also possible to customize certain vehicle features yourself using the navigation
system.
Settings that can be customized by:
Using the
navigation system Dealer
LPS options were correct at time of development. All options are subject to change without prior notice.
Vehicles with Navigation system:
Press the button.
Select
and push knob to select.
Select category and scroll
to specific customization
setting.
STEP 1
STEP 4
Select using the
Remote Touch unit and
push knob to select.
STEP 2
Scroll to page 2.
Select and push knob
to select.
STEP 3
STEP 5
MENU
Vehicle must be in “ON” mode to program
personalized settings.
After changing the settings, select .
Please refer to the 2015 IS 250/350
Quick Guide, or Navigation Owner’s
Manual for more information on Remote
Touch operations.
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□The doors automatically lock when the vehicle is taken out of park and placed into another
range. (Standard) = By shift from P
□The doors automatically lock when the vehicle speed is 12 mph or higher. = By speed
□The doors, if unlocked, will not automatically lock. = Off
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□The doors automatically unlock when the vehicle is placed into park.
(Standard) = By shift to P
□All the doors automatically unlock when the driver door is opened. = By driver door
□The doors, if locked, will not automatically unlock.= Off
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□Pressing the unlock button one time will unlock all doors. = Off
□Pressing the unlock button one time unlocks the driver door, and two times unlocks all
doors. (Standard) = On
4. Select doors to Unlock
When using Smart Access to unlock the doors:
□Gripping the driver door handle will unlock the driver door. (Standard) = Driver’s door
□Gripping the driver door handle will unlock all doors.= All doors
5. Auto Relock Timer
When the doors are unlocked and not opened:
□They will not automatically re-lock.
□They will automatically re-lock in 30 seconds.
□They will automatically re-lock in 60 seconds. (Standard)
□They will automatically re-lock in 120 seconds.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□Press the lock/unlock button and the emergency flashers will not flash. = Off
□Press the lock/unlock button and the emergency flashers will flash. (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be
programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□The seat heater intensity differs depending on the temperature inside the cabin, when seat
heater is operating. (Standard) = Timer
  □The seat heater intensity will not automatically adjust to temperature. = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□It will automatically engage the air conditioner compressor to reach the set temperature.
(Standard) = On
  □It will automatically achieve a set temperature, warm or cool, without engaging the air
conditioner compressor.*= Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker
or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF timer
After turning off the ignition and all the doors are closed, if the headlights are in the AUTO
position:
□The headlights will turn off immediately, when the vehicle is turned off and the driver door
is opened.
□The headlights will turn off in 30 seconds. (Standard)
□The headlights will turn off in 60 seconds.
□The headlights will turn off in 90 seconds.
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□OFF.
□ON. (Standard)
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park, the ignition turned off, the driver seat can be set to
the following:
  □Remain in the current position, as set by the driver. = Off
 □Automatically move away from the steering wheel partially. = Partial
 □Automatically move away from the steering wheel fully. = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be
programmed as follows:
□The driver seat will move to memory position when the driver door is unlocked. (Standard)
□The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□Turning the key one time will unlock all doors. = Off
□Turning the key one time unlocks the driver door, and two times unlocks all doors.
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□The buzzer will not sound. = Off
□The buzzer will sound. (Standard) = On
19. Access System with Elec. Key
When unlocking the doors:
□Deactivates Smart Access, only accessible using elec. key unlock button. = Off
□Use Smart Access (touch door handle) or remote buttons. (Standard)= On
Programmable by Dealer Only (cont’d)
20.Panic Mode
When pressing the panic button on the electronic key:
□The alarm will sound intermittently and the vehicle lights will flash. (Standard) = On
□The alarm will not sound and the vehicle lights will not flash. = Off
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key left and holding the position for 2 seconds will not open the windows and
moonroof. (Standard)
□Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key right and holding the position for 2 seconds will not close the windows and
moonroof. (Standard)
□Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23.Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□Slide. (Standard)
□Tilt.
* If equipped
24. Open Windows and Moonroof with Elec. Key*
When pressing the unlock button on the electronic key for 3 seconds:
□The windows and moonroof will not open. (Standard) = Off
□All the windows and moonroof will open. = On
* If equipped
25.Slide/Tilt Moonroof with Elec. Key*
When option #24 is on, the moonroof can be programmed for the following:
  □Slide. (Standard)
□Tilt.
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□On. (Standard) = On
□Off. = Off
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light
can be programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate.= Off
28.Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be
programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate. = Off
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be
programmed for the following:
□The outer foot lights will illuminate. (Standard)
□The outer foot lights will not illuminate.
30.Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for
the following:
□The foot lights will illuminate. (Standard)
□The foot lights will not illuminate.
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□The driver seat belt buzzer will sound. (Standard)
□The driver seat belt buzzer will not sound.
32.Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□The passenger seat belt buzzer will sound. (Standard)
□The passenger seat belt buzzer will not sound.
33.Opening the Trunk
By pressing on the trunk release button, located on the electronic key, the trunk will open. The
release button can be programmed as follows:
□Press button one time to release the trunk. (No delay)
□Press button two times to release the trunk.
□Press and hold button for 0.8 seconds to release the trunk. (Standard)
  □Press and hold button for 2 seconds to release the trunk.
□The button can be turned off so the trunk cannot be opened using the electronic key.
34.Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□Medium (Standard)
□Soft
□Loud
MENU
Menu
Vehicle Settings
Setup
Climate Nav
Navigation
Data Services
Settings
Vehicle
Vehicle
Phone LEXUS
App Suite
Display
LEXUS App Suite Info
Radio Media Phone Setup
Setup
Page2
LEXUS Park Assist
Maintenance
Vehicle Customization
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings

Settings that can be customized by:
Using the
navigation system Dealer
2
very dark dark normal
(standard)
light very light
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□The doors automatically lock when the vehicle is taken out of park and placed into another
range. (Standard) = By shift from P
□The doors automatically lock when the vehicle speed is 12 mph or higher. = By speed
□The doors, if unlocked, will not automatically lock. = Off
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□The doors automatically unlock when the vehicle is placed into park.
(Standard) = By shift to P
□All the doors automatically unlock when the driver door is opened. = By driver door
□The doors, if locked, will not automatically unlock.= Off
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□Pressing the unlock button one time will unlock all doors. = Off
□Pressing the unlock button one time unlocks the driver door, and two times unlocks all
doors. (Standard) = On
4. Select doors to Unlock
When using Smart Access to unlock the doors:
□Gripping the driver door handle will unlock the driver door. (Standard) = Driver’s door
□Gripping the driver door handle will unlock all doors.= All doors
5. Auto Relock Timer
When the doors are unlocked and not opened:
□They will not automatically re-lock.
□They will automatically re-lock in 30 seconds.
□They will automatically re-lock in 60 seconds. (Standard)
□They will automatically re-lock in 120 seconds.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□Press the lock/unlock button and the emergency flashers will not flash. = Off
□Press the lock/unlock button and the emergency flashers will flash. (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be
programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□The seat heater intensity differs depending on the temperature inside the cabin, when seat
heater is operating. (Standard) = Timer
  □The seat heater intensity will not automatically adjust to temperature. = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□It will automatically engage the air conditioner compressor to reach the set temperature.
(Standard) = On
  □It will automatically achieve a set temperature, warm or cool, without engaging the air
conditioner compressor.*= Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker
or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF timer
After turning off the ignition and all the doors are closed, if the headlights are in the AUTO
position:
□The headlights will turn off immediately, when the vehicle is turned off and the driver door
is opened.
□The headlights will turn off in 30 seconds. (Standard)
□The headlights will turn off in 60 seconds.
□The headlights will turn off in 90 seconds.
o volume 2volume 1 volume 3 volume 4 volume 5
(standard)
volume 6 volume 7
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□OFF.
□ON. (Standard)
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park, the ignition turned off, the driver seat can be set to
the following:
  □Remain in the current position, as set by the driver. = Off
 □Automatically move away from the steering wheel partially. = Partial
 □Automatically move away from the steering wheel fully. = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be
programmed as follows:
□The driver seat will move to memory position when the driver door is unlocked. (Standard)
□The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□Turning the key one time will unlock all doors. = Off
□Turning the key one time unlocks the driver door, and two times unlocks all doors.
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□The buzzer will not sound. = Off
□The buzzer will sound. (Standard) = On
19. Access System with Elec. Key
When unlocking the doors:
□Deactivates Smart Access, only accessible using elec. key unlock button. = Off
□Use Smart Access (touch door handle) or remote buttons. (Standard)= On
Programmable by Dealer Only (cont’d)
20.Panic Mode
When pressing the panic button on the electronic key:
□The alarm will sound intermittently and the vehicle lights will flash. (Standard) = On
□The alarm will not sound and the vehicle lights will not flash. = Off
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key left and holding the position for 2 seconds will not open the windows and
moonroof. (Standard)
□Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key right and holding the position for 2 seconds will not close the windows and
moonroof. (Standard)
□Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23.Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□Slide. (Standard)
□Tilt.
* If equipped
24. Open Windows and Moonroof with Elec. Key*
When pressing the unlock button on the electronic key for 3 seconds:
□The windows and moonroof will not open. (Standard) = Off
□All the windows and moonroof will open. = On
* If equipped
25.Slide/Tilt Moonroof with Elec. Key*
When option #24 is on, the moonroof can be programmed for the following:
  □Slide. (Standard)
□Tilt.
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□On. (Standard) = On
□Off. = Off
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light
can be programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate.= Off
28.Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be
programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate. = Off
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be
programmed for the following:
□The outer foot lights will illuminate. (Standard)
□The outer foot lights will not illuminate.
30.Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for
the following:
□The foot lights will illuminate. (Standard)
□The foot lights will not illuminate.
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□The driver seat belt buzzer will sound. (Standard)
□The driver seat belt buzzer will not sound.
32.Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□The passenger seat belt buzzer will sound. (Standard)
□The passenger seat belt buzzer will not sound.
33.Opening the Trunk
By pressing on the trunk release button, located on the electronic key, the trunk will open. The
release button can be programmed as follows:
□Press button one time to release the trunk. (No delay)
□Press button two times to release the trunk.
□Press and hold button for 0.8 seconds to release the trunk. (Standard)
  □Press and hold button for 2 seconds to release the trunk.
□The button can be turned off so the trunk cannot be opened using the electronic key.
34.Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□Medium (Standard)
□Soft
□Loud
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Door Lock Settings (cont’d)
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings

Settings that can be customized by:
Using the
navigation system Dealer
3
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□The doors automatically lock when the vehicle is taken out of park and placed into another
range. (Standard) = By shift from P
□The doors automatically lock when the vehicle speed is 12 mph or higher. = By speed
□The doors, if unlocked, will not automatically lock. = Off
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□The doors automatically unlock when the vehicle is placed into park.
(Standard) = By shift to P
□All the doors automatically unlock when the driver door is opened. = By driver door
□The doors, if locked, will not automatically unlock.= Off
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□Pressing the unlock button one time will unlock all doors. = Off
□Pressing the unlock button one time unlocks the driver door, and two times unlocks all
doors. (Standard) = On
4. Select doors to Unlock
When using Smart Access to unlock the doors:
□Gripping the driver door handle will unlock the driver door. (Standard) = Driver’s door
□Gripping the driver door handle will unlock all doors.= All doors
5. Auto Relock Timer
When the doors are unlocked and not opened:
□They will not automatically re-lock.
□They will automatically re-lock in 30 seconds.
□They will automatically re-lock in 60 seconds. (Standard)
□They will automatically re-lock in 120 seconds.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□Press the lock/unlock button and the emergency flashers will not flash. = Off
□Press the lock/unlock button and the emergency flashers will flash. (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be
programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□The seat heater intensity differs depending on the temperature inside the cabin, when seat
heater is operating. (Standard) = Timer
  □The seat heater intensity will not automatically adjust to temperature. = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□It will automatically engage the air conditioner compressor to reach the set temperature.
(Standard) = On
  □It will automatically achieve a set temperature, warm or cool, without engaging the air
conditioner compressor.*= Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker
or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF timer
After turning off the ignition and all the doors are closed, if the headlights are in the AUTO
position:
□The headlights will turn off immediately, when the vehicle is turned off and the driver door
is opened.
□The headlights will turn off in 30 seconds. (Standard)
□The headlights will turn off in 60 seconds.
□The headlights will turn off in 90 seconds.
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□OFF.
□ON. (Standard)
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park, the ignition turned off, the driver seat can be set to
the following:
  □Remain in the current position, as set by the driver. = Off
 □Automatically move away from the steering wheel partially. = Partial
 □Automatically move away from the steering wheel fully. = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be
programmed as follows:
□The driver seat will move to memory position when the driver door is unlocked. (Standard)
□The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□Turning the key one time will unlock all doors. = Off
□Turning the key one time unlocks the driver door, and two times unlocks all doors.
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□The buzzer will not sound. = Off
□The buzzer will sound. (Standard) = On
19. Access System with Elec. Key
When unlocking the doors:
□Deactivates Smart Access, only accessible using elec. key unlock button. = Off
□Use Smart Access (touch door handle) or remote buttons. (Standard)= On
Programmable by Dealer Only (cont’d)
20.Panic Mode
When pressing the panic button on the electronic key:
□The alarm will sound intermittently and the vehicle lights will flash. (Standard) = On
□The alarm will not sound and the vehicle lights will not flash. = Off
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key left and holding the position for 2 seconds will not open the windows and
moonroof. (Standard)
□Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key right and holding the position for 2 seconds will not close the windows and
moonroof. (Standard)
□Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23.Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□Slide. (Standard)
□Tilt.
* If equipped
24. Open Windows and Moonroof with Elec. Key*
When pressing the unlock button on the electronic key for 3 seconds:
□The windows and moonroof will not open. (Standard) = Off
□All the windows and moonroof will open. = On
* If equipped
25.Slide/Tilt Moonroof with Elec. Key*
When option #24 is on, the moonroof can be programmed for the following:
  □Slide. (Standard)
□Tilt.
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□On. (Standard) = On
□Off. = Off
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light
can be programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate.= Off
28.Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be
programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate. = Off
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be
programmed for the following:
□The outer foot lights will illuminate. (Standard)
□The outer foot lights will not illuminate.
30.Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for
the following:
□The foot lights will illuminate. (Standard)
□The foot lights will not illuminate.
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□The driver seat belt buzzer will sound. (Standard)
□The driver seat belt buzzer will not sound.
32.Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□The passenger seat belt buzzer will sound. (Standard)
□The passenger seat belt buzzer will not sound.
33.Opening the Trunk
By pressing on the trunk release button, located on the electronic key, the trunk will open. The
release button can be programmed as follows:
□Press button one time to release the trunk. (No delay)
□Press button two times to release the trunk.
□Press and hold button for 0.8 seconds to release the trunk. (Standard)
  □Press and hold button for 2 seconds to release the trunk.
□The button can be turned off so the trunk cannot be opened using the electronic key.
34.Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□Medium (Standard)
□Soft
□Loud
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings
Vehicle Customization
Other Vehicle Settings
Light Settings
Climate Settings
Door Lock Settings

Settings that can be customized by:
Using the
navigation system Dealer
4
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□The doors automatically lock when the vehicle is taken out of park and placed into another
range. (Standard) = By shift from P
□The doors automatically lock when the vehicle speed is 12 mph or higher. = By speed
□The doors, if unlocked, will not automatically lock. = Off
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□The doors automatically unlock when the vehicle is placed into park.
(Standard) = By shift to P
□All the doors automatically unlock when the driver door is opened. = By driver door
□The doors, if locked, will not automatically unlock.= Off
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□Pressing the unlock button one time will unlock all doors. = Off
□Pressing the unlock button one time unlocks the driver door, and two times unlocks all
doors. (Standard) = On
4. Select doors to Unlock
When using Smart Access to unlock the doors:
□Gripping the driver door handle will unlock the driver door. (Standard) = Driver’s door
□Gripping the driver door handle will unlock all doors.= All doors
5. Auto Relock Timer
When the doors are unlocked and not opened:
□They will not automatically re-lock.
□They will automatically re-lock in 30 seconds.
□They will automatically re-lock in 60 seconds. (Standard)
□They will automatically re-lock in 120 seconds.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□Press the lock/unlock button and the emergency flashers will not flash. = Off
□Press the lock/unlock button and the emergency flashers will flash. (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be
programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□The seat heater intensity differs depending on the temperature inside the cabin, when seat
heater is operating. (Standard) = Timer
  □The seat heater intensity will not automatically adjust to temperature. = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□It will automatically engage the air conditioner compressor to reach the set temperature.
(Standard) = On
  □It will automatically achieve a set temperature, warm or cool, without engaging the air
conditioner compressor.*= Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker
or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF timer
After turning off the ignition and all the doors are closed, if the headlights are in the AUTO
position:
□The headlights will turn off immediately, when the vehicle is turned off and the driver door
is opened.
□The headlights will turn off in 30 seconds. (Standard)
□The headlights will turn off in 60 seconds.
□The headlights will turn off in 90 seconds.
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□OFF.
□ON. (Standard)
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park, the ignition turned off, the driver seat can be set to
the following:
  □Remain in the current position, as set by the driver. = Off
 □Automatically move away from the steering wheel partially. = Partial
 □Automatically move away from the steering wheel fully. = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be
programmed as follows:
□The driver seat will move to memory position when the driver door is unlocked. (Standard)
□The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□Turning the key one time will unlock all doors. = Off
□Turning the key one time unlocks the driver door, and two times unlocks all doors.
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□The buzzer will not sound. = Off
□The buzzer will sound. (Standard) = On
19. Access System with Elec. Key
When unlocking the doors:
□Deactivates Smart Access, only accessible using elec. key unlock button. = Off
□Use Smart Access (touch door handle) or remote buttons. (Standard)= On
Programmable by Dealer Only (cont’d)
20.Panic Mode
When pressing the panic button on the electronic key:
□The alarm will sound intermittently and the vehicle lights will flash. (Standard) = On
□The alarm will not sound and the vehicle lights will not flash. = Off
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key left and holding the position for 2 seconds will not open the windows and
moonroof. (Standard)
□Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key right and holding the position for 2 seconds will not close the windows and
moonroof. (Standard)
□Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23.Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□Slide. (Standard)
□Tilt.
* If equipped
24. Open Windows and Moonroof with Elec. Key*
When pressing the unlock button on the electronic key for 3 seconds:
□The windows and moonroof will not open. (Standard) = Off
□All the windows and moonroof will open. = On
* If equipped
25.Slide/Tilt Moonroof with Elec. Key*
When option #24 is on, the moonroof can be programmed for the following:
  □Slide. (Standard)
□Tilt.
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□On. (Standard) = On
□Off. = Off
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light
can be programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate.= Off
28.Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be
programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate. = Off
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be
programmed for the following:
□The outer foot lights will illuminate. (Standard)
□The outer foot lights will not illuminate.
30.Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for
the following:
□The foot lights will illuminate. (Standard)
□The foot lights will not illuminate.
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□The driver seat belt buzzer will sound. (Standard)
□The driver seat belt buzzer will not sound.
32.Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□The passenger seat belt buzzer will sound. (Standard)
□The passenger seat belt buzzer will not sound.
33.Opening the Trunk
By pressing on the trunk release button, located on the electronic key, the trunk will open. The
release button can be programmed as follows:
□Press button one time to release the trunk. (No delay)
□Press button two times to release the trunk.
□Press and hold button for 0.8 seconds to release the trunk. (Standard)
  □Press and hold button for 2 seconds to release the trunk.
□The button can be turned off so the trunk cannot be opened using the electronic key.
34.Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□Medium (Standard)
□Soft
□Loud

Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed for the following:
□The doors automatically lock when the vehicle is taken out of park and placed into another
range. (Standard) = By shift from P
□The doors automatically lock when the vehicle speed is 12 mph or higher. = By speed
□The doors, if unlocked, will not automatically lock. = Off
2. Automatic Door Unlock
The automatic door locks can be programmed for the following:
□The doors automatically unlock when the vehicle is placed into park.
(Standard) = By shift to P
□All the doors automatically unlock when the driver door is opened. = By driver door
□The doors, if locked, will not automatically unlock.= Off
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□Pressing the unlock button one time will unlock all doors. = Off
□Pressing the unlock button one time unlocks the driver door, and two times unlocks all
doors. (Standard) = On
4. Select doors to Unlock
When using Smart Access to unlock the doors:
□Gripping the driver door handle will unlock the driver door. (Standard) = Driver’s door
□Gripping the driver door handle will unlock all doors.= All doors
5. Auto Relock Timer
When the doors are unlocked and not opened:
□They will not automatically re-lock.
□They will automatically re-lock in 30 seconds.
□They will automatically re-lock in 60 seconds. (Standard)
□They will automatically re-lock in 120 seconds.
6. Lock/Unlock Feedback - Lights
Using the electronic key, the following functions can be programmed:
□Press the lock/unlock button and the emergency flashers will not flash. = Off
□Press the lock/unlock button and the emergency flashers will flash. (Standard) = On
7. Lock/Unlock Feedback-Tone
When the lock button is pressed on the electronic key, the system volume can be
programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□The seat heater intensity differs depending on the temperature inside the cabin, when seat
heater is operating. (Standard) = Timer
  □The seat heater intensity will not automatically adjust to temperature. = Manual
* If equipped.
9. Auto A/C Mode
When Auto A/C is selected:
□It will automatically engage the air conditioner compressor to reach the set temperature.
(Standard) = On
  □It will automatically achieve a set temperature, warm or cool, without engaging the air
conditioner compressor.*= Off
* Note: The AC compressor will be engaged when the auto AC button is pressed a second time.
Light Settings
10. Headlamps-ON Sensitivity
When driving the vehicle, the front headlights can be programmed to turn ON under darker
or lighter ambient light conditions. (Headlight switch must be in “AUTO” mode):
11. Headlamps Auto-OFF timer
After turning off the ignition and all the doors are closed, if the headlights are in the AUTO
position:
□The headlights will turn off immediately, when the vehicle is turned off and the driver door
is opened.
□The headlights will turn off in 30 seconds. (Standard)
□The headlights will turn off in 60 seconds.
□The headlights will turn off in 90 seconds.
Light Settings (cont’d)
12. Daytime Running Lights
Illumination of daytime running lights:
□OFF.
□ON. (Standard)
13. Interior Lights Off Timer
After closing the door, the interior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
14. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on for the following:
□15 seconds. (Standard)
□7.5 seconds.
□30 seconds.
□0 seconds.
Other Vehicle Settings
15. Driver’s Seat Easy Exit*
When the vehicle is placed in park, the ignition turned off, the driver seat can be set to
the following:
  □Remain in the current position, as set by the driver. = Off
 □Automatically move away from the steering wheel partially. = Partial
 □Automatically move away from the steering wheel fully. = Full (Standard)
* If equipped
Programmable by Dealer Only
16. Linking Seat Position Memory With Door Unlock*
When using Smart Access to unlock the doors, seat position memory recall can be
programmed as follows:
□The driver seat will move to memory position when the driver door is unlocked. (Standard)
□The driver seat will move to memory position when any door is unlocked.
* If equipped
17. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□Turning the key one time will unlock all doors. = Off
□Turning the key one time unlocks the driver door, and two times unlocks all doors.
(Standard) = On
18. Door lock buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□The buzzer will not sound. = Off
□The buzzer will sound. (Standard) = On
19. Access System with Elec. Key
When unlocking the doors:
□Deactivates Smart Access, only accessible using elec. key unlock button. = Off
□Use Smart Access (touch door handle) or remote buttons. (Standard)= On
Programmable by Dealer Only (cont’d)
20.Panic Mode
When pressing the panic button on the electronic key:
□The alarm will sound intermittently and the vehicle lights will flash. (Standard) = On
□The alarm will not sound and the vehicle lights will not flash. = Off
21. Open Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key left and holding the position for 2 seconds will not open the windows and
moonroof. (Standard)
□Turning the key left and holding the position for 2 seconds will open the windows and
moonroof.
* If equipped
22. Close Windows and Moonroof with Mechanical Key*
When using the mechanical key to operate windows and moonroof:
□Turning the key right and holding the position for 2 seconds will not close the windows and
moonroof. (Standard)
□Turning the key right and holding the position for 2 seconds will close the windows and
moonroof.
* If equipped
23.Slide/Tilt Moonroof using Mechanical Key*
When option #21 is on, the moonroof can be programmed for the following:
□Slide. (Standard)
□Tilt.
* If equipped
24. Open Windows and Moonroof with Elec. Key*
When pressing the unlock button on the electronic key for 3 seconds:
□The windows and moonroof will not open. (Standard) = Off
□All the windows and moonroof will open. = On
* If equipped
25.Slide/Tilt Moonroof with Elec. Key*
When option #24 is on, the moonroof can be programmed for the following:
  □Slide. (Standard)
□Tilt.
* If equipped
26. Interior Light
The interior light will illuminate when POWER is switched to OFF.
□On. (Standard) = On
□Off. = Off
27. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic key or mechanical key to unlock the door, the interior cabin light
can be programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate.= Off
28.Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be
programmed for the following:
□The cabin light will illuminate. (Standard) = On
□The cabin light will not illuminate. = Off
Dealer
only
Settings that can be customized by:
Using the
navigation system Dealer
5
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Programmable by Dealer Only (cont’d)
29. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be
programmed for the following:
□The outer foot lights will illuminate. (Standard)
□The outer foot lights will not illuminate.
30.Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed for
the following:
□The foot lights will illuminate. (Standard)
□The foot lights will not illuminate.
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 13 mph:
□The driver seat belt buzzer will sound. (Standard)
□The driver seat belt buzzer will not sound.
32.Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 13 mph:
□The passenger seat belt buzzer will sound. (Standard)
□The passenger seat belt buzzer will not sound.
33.Opening the Trunk
By pressing on the trunk release button, located on the electronic key, the trunk will open. The
release button can be programmed as follows:
□Press button one time to release the trunk. (No delay)
□Press button two times to release the trunk.
□Press and hold button for 0.8 seconds to release the trunk. (Standard)
  □Press and hold button for 2 seconds to release the trunk.
□The button can be turned off so the trunk cannot be opened using the electronic key.
34.Lane change flasher volume
When the turn signal level is flashing, the volume can be programmed:
□Medium (Standard)
□Soft
□Loud
Repair Order Number ( Dealer only) Vehicle Identification Number ( Dealer only)
Date Customer Signature