1. NAVIGATION OPERATION
1
QUICK GUIDE
13
ES350/300h_Navi_OM33A07U_(U)
12.05.11 08:14
*: Press and hold the “PWR·VOL” knob for 3 seconds or more to turn off the screen and restart the
navigation system. Do this when the vehicle-mounted device response is extremely slow.
“Route” Select to change the route. 97, 99
“Show on Map”
Select to browse information about guidance
route, to set the POI (Point of Interest) icons to be
displayed on the screen, to record the route, etc.
104, 342,
367
Zoom in button Select to magnify the map scale. 48
Foot print map
button
Select to display the foot print map and the build-
ing information. 48
“Map Mode” Select to display the “Map Mode” screen. 45
Distance and
time to destina-
tion
Select to display the distance, estimated travel
and arrival time to the destination. 96
XM indicator This mark is displayed when XM information is re-
ceived. 340, 342
“GPS” mark
(Global Position-
ing System)
Whenever the vehicle is receiving signals from the
GPS, this mark is displayed. 139
INFORMATION
●Remove dirt from the display and its surrounding area by lightly wiping with a soft, dry cloth,
such as a cloth used for cleaning glasses with plastic lenses. Scrubbing too hard or using a
hard cloth could scratch the display. Also, the display is treated with a coating, and could be
damaged by coming into contact with benzine or alkaline solution.
●When the screen is viewed through polarized sunglasses, a rainbow pattern may appear on
the screen due to optical characteristics of the screen. If this is disturbing, please operate
the screen without polarized sunglasses.
No. Name Function Page
