LG SIGNATURE LGSBWAC92 Parts list manual

Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
Safety and Reference
Copyright 2019 LG Electronics Inc.
All Rights Reserved.
*MFL71182425*
(1909-REV00)

2
ENGLISH
Warning! Safety
Instructions
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION:TO REDUCETHE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFERTO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage”within the product’s
enclosure that may be of sucient
magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING:TO REDUCETHE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT EXPOSETHIS
PRODUCT TO RAIN OR MOISTURE.
•TO PREVENT THE SPREAD OF FIRE, KEEP
CANDLES OR OTHER ITEMSWITH OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL
TIMES.
•Do not place the TV and/or remote
control in the following environments:
-Keep the product away from direct
sunlight.
-An area with high humidity such as a
bathroom
-Near any heat source such as stoves and
other devices that produce heat.
-Near kitchen counters or humidiers
where they can easily be exposed to steam
or oil.
-An area exposed to rain or wind.
-Do not expose to dripping or splashing and
do not place objects lled with liquids,
such as vases, cups, etc. on or over the
apparatus (e.g., on shelves above the unit).
-Near ammable objects such as gasoline
or candles, or expose theTV to direct air
conditioning.
-Do not install in excessively dusty places.
Otherwise, this may result in re, electric
shock, combustion/explosion, malfunction
or product deformation.

3
ENGLISH
•Ventilation
-Install yourTV where there is proper
ventilation. Do not install in a conned
space such as a bookcase.
-Do not install the product on a carpet or
cushion.
-Do not block or cover the product with
cloth or other materials while unit is
plugged in.
•Take care not to touch the ventilation
openings.When watching theTV for a
long period, the ventilation openings may
become hot.
•Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the device.
•Do not move theTV whilst the Power cord is
plugged in.
•Do not use a damaged or loosely tting
power cord.
•Be sure do grasp the plug when unplugging
the power cord. Do not pull on the power
cord to unplug theTV.
•Do not connect too many devices to the
same AC power outlet as this could result in
re or electric shock.
•Disconnecting the Device from the
Main Power
-The power plug is the disconnecting
device. In case of an emergency, the power
plug must remain readily accessible.
•Do not let your children climb or cling onto
theTV. Otherwise, theTV may fall over,
which may cause serious injury.
•Outdoor Antenna Grounding (Can dier
by country):
-If an outdoor antenna is installed, follow
the precautions below. An outdoor
antenna system should not be located in
the vicinity of overhead power lines or
other electric light or power circuits, or
where it can come in contact with such
power lines or circuits as death or serious
injury can occur.
Be sure the antenna system is grounded to
provide some protection against voltage
surges and built-up static charges. Section
810 of the National Electrical Code (NEC)
in the U.S.A. provides information with
respect to proper grounding of the mast
and supporting structure, grounding of
the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to
grounding electrodes and requirements
for the grounding electrode. Antenna
grounding according to the National
Electrical Code, ANSI/NFPA 70

4
ENGLISH
•Grounding (Except for devices which are
not grounded.)
-TV with a three-prong grounded AC plug
must be connected to a three-prong
grounded AC outlet. Ensure that you
connect the earth ground wire to prevent
possible electric shock.
•Never touch this apparatus or antenna
during a lightning storm.You may be
electrocuted.
•Make sure the power cord is connected
securely to theTV and wall socket if not
secured damage to the Plug and socket may
occur and in extreme cases a re may break
out.
•Do not insert metallic or inammable
objects into the product. If a foreign object is
dropped into the product, unplug the power
cord and contact the customer service.
•Do not touch the end of the power
cord while it is plugged in.You may be
electrocuted.
•If any of the following occur, unplug
the product immediately and contact
your local customer service.
-The product has been damaged.
-If water or another substance enters the
product (like an AC adapter, power cord,
orTV).
-If you smell smoke or other odors coming
from theTV
-When lightning storms or when unused for
long periods of time.
Even the TV is turned o by remote control
or button, AC power source is connected to
the unit if not unplugged in.
•Do not use high voltage electrical equipment
near theTV (e.g., a bug zapper).This may
result in product malfunction.
•Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Accidental re or electric
shock can occur. Contact your local customer
service for service or repair. Unauthorized
modication could void the user’s authority
to operate this product.

5
ENGLISH
•Use only an authorized attachments /
accessories approved by LG Electronics.
Otherwise, this may result in re, electric
shock, malfunction, or product damage.
•Never disassemble the AC adapter or power
cord.This may result in re or electric shock.
•Handle the adapter carefully to avoid
dropping or striking it. An impact could
damage the adapter.
•To reduce the risk of re or electrical shock,
do not touch theTV with wet hands. If the
power cord prongs are wet or covered with
dust, dry the power plug completely or wipe
dust o.
•Batteries
-Store the accessories (battery, etc.) in a
safe location out of the reach of children.
-Do not short circuit, disassemble, or allow
the batteries to overheat. Do not dispose of
batteries in a re. Batteries should not be
exposed to excessive heat.
•Moving
-When moving, make sure the product
is turned o, unplugged, and all cables
have been removed. It may take 2 or more
people to carry largerTVs. Do not press
or put stress on the front panel of the
TV. Otherwise, this may result in product
damage, re hazard or injury.
•Keep the packing anti-moisture material or
vinyl packing out of the reach of children.
•Do not allow an impact shock, any objects
to fall into the product, and do not drop
anything onto the screen.
•Do not press strongly upon the panel with
a hand or a sharp object such as a nail,
pencil, or pen, or make a scratch on it. It may
causedamage to screen.
•Cleaning
-When cleaning, unplug the power cord
and wipe gently with a soft/dry cloth. Do
not spray water or other liquids directly
on theTV. Do not clean yourTV with
chemicals including glass cleaner, any type
of air freshener, insecticide, lubricants,
wax (car, industrial), abrasive, thinner,
benzene, alcohol etc., which can damage
the product and/or its panel. Otherwise,
this may result in electric shock or product
damage.

6
ENGLISH
Preparing
• If theTV is turned on for the rst time after
it was shipped from the factory, initialization
of theTV may take a few minutes.
• Image shown may dier from yourTV.
• YourTV’s OSD (On Screen Display) may dier
slightly from that shown in this manual.
• The available menus and options may dier
from the input source or product model that
you are using.
• New features may be added to thisTV in the
future.
• The device must be easily accessed to a
location outlet near the access. Some devices
are not made by turning on / o button,
turning o the device and unplugging the
power cord.
• The items supplied with your product may
vary depending on the model.
• Product specications or contents of this
manual may be changed without prior
notice due to upgrade of product functions.
• For an optimal connection, HDMI cables
and USB devices should have bezels less
than 10 mm thick and 18 mm width. Use an
extension cable that supports if the
USB cable or USB memory stick does not t
into your TV’s USB port.
A
B
A
B*A
<
=
10 mm
*B
<
=
18 mm
• Use a certied cable with the HDMI logo
attached.
• If you do not use a certied HDMI cable,
the screen may not display or a connection
error may occur. (Recommended HDMI Cable
Types)
-Ultra High-Speed HDMI®/™ cable (3 m or
less)

7
ENGLISH
Separate Purchase
Separate purchase items can be changed or
modied for quality improvement without any
notication. Contact your dealer to buy these
items. These devices only work with certain
models.
The model name or design may be changed
depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
The manufacturer shall not be held responsible
for any injuries, damages, or quality issues that
may arise if an item that is not listed below is
purchased separately and used.
Magic Remote Control
AN-MR19BA
Check whether yourTV model supports
Bluetooth in theWireless Module Specication
to verify whether it can be used with the Magic
Remote.
Companion Box (AV box)
Wall mount
W7AWB
Lifting and moving
the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
• It is recommended to move theTV in
the box or packing material that theTV
originally came in.
• Before moving or lifting theTV, disconnect
the power cord and all cables.
• When holding theTV, the screen should
face away from you to avoid damage.
• Hold the top and bottom of theTV frame
rmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.

8
ENGLISH
• When transporting a largeTV, there should
be at least 2 people.
• When transporting the TV by hand, hold
theTV as shown in the following illustration.
• When transporting the TV, do not expose
theTV to jolts or excessive vibration.
• When transporting the TV, keep theTV
upright, never turn theTV on its side or tilt
towards the left or right.
• Do not apply excessive pressure to cause
exing / bending of frame chassis as it may
damage screen.
• When handling theTV, be careful not to
damage the protruding buttons.
• Avoid touching the screen at all times,
as this may result in damage to the
screen.
• When supported cable is not long
enough to connectTV set with
Companion Box (AV Box), you can use
an extension cable.
• Please do not pile the stu up or press
strongly the speaker. This may result in
product damage or degradation.

9
ENGLISH
Mounting to the Wall
When you attach theTV to other building
materials, please contact qualied personnel.
Provided item
Wall mount Punching Guide
Wall mounting screw
Ø5 x L65
Wall mounting
anchor
Wall mounting screw
for wood
Ø3 x L18
•Check the material of the wall and the
thickness of the nishing.
•Use theWall mount anchor for wall material
of concrete, light concrete, strong natural
stone, soft natural stone masonry brick and
hallow block that do not crack.
Wall Material Tools Wall Width
Concrete Wall
mounting
anchor,Wall
mounting
screw,
Ø 3/6/8 mm
Drill bit
70 mm
Brick
Natural stone
Metal Panel
Plywood Wall
mounting
screw, Ø 1.8
mm Drill bit
30 mm
EPS Panel Penetrate
the wall
Plasterboard +
Plywood 30 mm

10
ENGLISH
•When installing on a gypsum board or
medium-density berboard (MDF) wall,
fasten the screws to the studs that support
the wall. If there are no studs, check
the distance from the inner wall before
installing.
-30 mm or below: Install directly on the
inner wall using a 65 mm screw.
-30 mm or above: Install using a separate
hanger.
Wall
•When installing the wall mount, check the
positions of the wooden studs using a stud
nder. Then, fasten the screws on at least
two separate studs before proceeding.
Wall mount
Stud
•When installing the product on wall material
not designated, install the product so that
each location can withstand the pull out
load of 70 kgf (686 N) and shear load of 100
kgf (980 N) or above.
•Use the Ø 8 mm drill bit for concrete and
hammer (Impact) drill.
Tools you will need
•Phillips head + driver (manual or
motorized), Ø 3/6/8 mm Drill bit,
Level, Stud nder, Drill
How to attach to masonry
walls
Please follow the below direction.
1 Use a drill bit Ø 8 mm to drill a hole for the
anchor location within a depth of 80 mm
to 100 mm.
2 Clean the drilled hole.
3 Insert the sealed wall mounting anchor to
the hole. (When inserting the anchor, use
a hammer.)
Wall mounting anchor
4 Set the wall mount on the wall by aligning
to the location of the hole. And, set the
angle adjusting part to face upward.
Wall mount