LG M4200NB10 User manual

USER'S GUIDE

Plea_ read these _fety precautions carefully before using the product,
Precautions in installing the Product
"Warning
m Keep away from _souses like elec_cel I_aters.
-F_J_icaJ s_k, _re, mal_n_on or _f_on may occur..
mKeep the packJnganti-m_sture material _vinyl pacing o,_ of the re_h of children,
-_ti-mo_re mate_3i is ha_f_ __,vailowed. if_ailowed by m_ke, force _ _tient to vomff and v_t
_rest hospital Add_l_j, viny_pac_ _ _e s_ocatJon. K_p ffout of _e _ach _ children.
1Do not p_ heavyobits on _e p_uct or situp_ tL
offthep_ _tap_ or isdropp_, you_y _ injured,Chi!_en mustpay pa_cul_ atte_on_
1 Do,_t leavethe powerorsignalcable unattend_ on_e pa_w_,
The _sserby canfa_ter,wh_h c_ cause,ei_l _, fire, p_uct breakd_n or injury_
Iinstall the p_uct in a r_a_ and d_ place,.
- D_t _ _stum can _e ele_dcai sh_, fire _ pm.xJud_ge.
=ff you cansn'_l_s_ke oroth_ _ors or heara strangesound_nplu_ the _r c_d a_ contactthe
ee_i_ center.
-ffy_ _qtinue to u_ w_o_ taking propermea.sures,e_ct_a_ sh_k or firecan _r.
=ff you _ro_,_ the p_uct or_he case _broken, turn offthe pr_uct a_ unplug _e po_r cord.
-ffyou c_tinue to _ wit_ _kJr_ proper mea_Jres, e_ shock or fire can oocur__ 1_ _r_i_ oen-
|er.
i Do n_ drop rr_ta_ltc objects such as _tns, h_lr p|ns, ch_cks or wire into th_ _oducL or inflammable
objects such as paper a_3 matches._ Ch|ldren must pay po_icular attention.
-Ei_cal s_-_k, fire or inju_ _n occur_ ffa _ore_n obje_ is drop_d intot_'_product, unplug tb_ power co_ ar_
_ac_ _ _rv_e. center
Caution
•M_e _re t_ _'oduct ventil_on hole is not bl_k_, in_ll the W_uct in asui_y wide _a_ (_re
•an !_m f_ _e wall)
offyou i_l the p_ too cl_ to _ wall_ _may be defo_ or fire _n bre_ _ due to interr_ _t_
mDo not b_ck t_ ven_l_on t*_le oftheproductby a ta_le_oth or c_in,,
-_ _uct can be_fo_ orfire canbr_k _ dueto _erheating in_ the p_uct
minstallthe p_ct _aflat and sta_e placethathasno riskofdroppingt_ pr_t,
-ff:_ p_ isdraped, you may_ injuredc__theprod_ may _ breken_
I installthe p_uct _ere _ _11occur,
I K_p the productawayfrom direct sunlight.
oThe _od_ can bedama_d
_!!_ _i_

Electrical Power Related Precautions
Warning
mMakesureto conn_t t_ powerc_le tot_ g_ cu_nt.
-YOUmaybe electrocuted_ inju_
I Use_e r_d v'o_ge on_y,
oThe p_ canbe _maged, _ you_y bee_ctrocu_ed,
I Duringa_under or |tgh_ing _o_, unplug t_ _wer ,_ble or signalcable.
- YOUmaybe electrocuted_ a fi_ canbreako_
III _ not conn_ se_m| extension cords, e_rica| _pliances or ele_cal _ to as_ngle ouUet,
Use a_wer bat with agrounding _ina[ designed for exc|usive use w_h the computer,
- A fire can break out _ to ove_ati_.
I_ not touch thepowerplugw_ wet hands,A_l_ionally, if_e cord piniswet _covered_th dus_ dry
t_ powerplugcomplete|yor w|_ dust off.
-You maybe el_rocuted ,duetoexcessmo_J_e.
mIfyou don'tintendto use_e productfor a longUme,unplug the power cablefrom _e product.
-C_veringdust _ _u_ a_re,or ir___la_ deter_on cancau_4_el_dc _ge, e_c shock_ fire.
m Fix _e power cable complete|y.
-Ill#'_ _er c_b_e_ _ fixed comp_tely, afire c_ b_ak _,
I Ho_ the plugwhen pullingoutt_ power_ble, _ not _nd _e power cordwi_ exces_ve rome or p_
hea_j objec_ on thepower cord.
-_e, powerlir_canbe _m_ed, which _y ca_e, ,elect_ sh_k or fire
_=_ not inse_ a co_uctor (likea _ta_ c_ps_ck) into_e end of th_ power ca_e whilethe otherend is
con_cL_ to the input term|nal on the _11. A_onally, do not touchthe power cabilerightafter _u_
ging into the wa|| |n_t te_inal,
-Y_J maybe el_rocuted.
II "r|_epower _pp|y co_ is usedasthe,m_n disconn_ion dev|ce,Ensure _at t_ _ket-outlet iseasily
_essible _er installation.
Caution
I_n_ unplug_e pow_ _rd _ile t_ prod_t _s_nuse_
-E_d_ shockc_ d_age _J-_ep_uct_
Precautions in Moving the Product
Warning
=Makesu_ toturn offthe p_ucL
- You maybe el_rocuted _ thep_ canbe damaged.
I Makesu_ to _ove ,a|__b|_: beforem_ing _e p,_uct,,
-YOUmay[beelectrocuted_ thep_ canbe damaged,

Caution
I Do not _ock the _oduct w_n moving _.
-You may be e_ctr_:__4Jtedor t_ p_ can be d_aged.
m DO not dispose the product-p_kJng _U_ it w_n you _ve,
.l Make the p_e| face fo_rdl and ho_ it with both hands to move.
-ify_ dr_ t_ _oduct, the p_ _n _u_ ele_c s_ _ fire,,,C_ct w_ the _rv_e center for
mp_r.
Precautions in Using the Product
=Do not dt_ssemble, _pair or m_i_ the _duct _ your own dtscr_tiono
- Fire_ ele_c _k acci_nt can occur.
- Contact the _e center for c_ck, _librat_ or repot,
!Do not _,_ wa_er on _e I_oduct or s_ub _ an inflammable substan_ (thinn_ _ _r_er_). R_
el_c shock accide_ c_ occur,
= Ke_ the p_duct aw_ f_ water.
-Fi_ or ele_c _k aoci_ _ occur,
Caution
mDo not put or store inflammable sub.noes n_r the product.
-The_ _ a _r _ exp_on orfi_e due to care_ss handling of the inf_mmable _bstances.
When cleaning _e brown 'tu_ surface, _npl_g the power c_ a_ _r_b with s_ cloth _preve_
s_ching, Do n_ c_an with a wet _oth,
oThe water can sink i_o the p_uct_ wh_h can cause eiectr_ shock or serious maffunct_n,
Take arest _ time to _me to, pro_t your vision.
Ke_ the p_duct c_n _ all _s,
=Take a comfo_le _d n_ral iposi_on when working with a product to relax the muscles.
,l Take a r_ular breakw_n working with a _od_ for a ling time,
=Do not pt_ strongly u_n t_ _n_ with ahand or sh_ object s_h _ n_il, _ncil or pen, _ ma_ a
s_h on &,
= Ke_ proper dfsta_e from the product
-Y_ Won may be impair_ it yo_ I_ al_the pr_ too cl_e_
! _t tl_ appropt_ te_|utJon and cl_k by referring to the User's Guide.
- Y_ v_on can be im_ired.
Use authotize_ detergent only w_n clewing the pro-de_ (Do not use _nzene, thinner _ alcoh_,)
oProduct can be defo_ed.
On Disposal
II The fluorescent lamp used inthis product contai_ a small am_nt of mercury
=l Do not disp_ of this product with general ho_,_ehold waste
Dis,p_al of this product m_t be carned o_ in accor_nce to the regulations of your local aut_rity,

Name of the Remote ,ControlButtons
PowerO_Off Button
Menu
7 8 9
Inp_ _lecll Button
ff you press the b_'ton or_e, the input
source wil_ _a_e.
Oigit3_signal_AnalogL_ signal
Brit_ up and ,d_n C_"4rast and
Brig--s _vel,
O,KB_n
L,OCK8i_
(_ A17)
Bulton
To select the image, size of
the screen
Num_r S_ect Button
Inserting batteries into remote Control
/
!
t
1. Take out the b_e_ cap.
2. Insert b_te_es with co_ect poJlarity (d-),
3. CHosethe ba_e_ cap,
• Disp_ of used batteries in the recycle bin '_oprevent environmental pollution

Rear View
iiilii_iiii
OPower Conn_tor : Conn_t the power cord
RS-232C Serial Ports
Anal_ue Signal InputIOut_t
Mouse Port
OKey_rd Port
VGA Port
LAN Port
USB Port
QSerial Port
|
|
Note

m ¸
Rear'side of the product_
_nn_ the _=wer cord°
When using _th the D-Sub signal.
First of all_ see if the computer, product and the peripherals are turned off,
Then, _nnect the signal input _b]e.

mTurn on power by pressing the power bu_on on the proud.
Power bu_on
ffy_ pr_ the P'_er bLfftc_ _ _re_ at# the _ _n_ed to
t}-_ _reen wilt turn Of¢_OFF_
Sel_ an input signal,
Press the SOURCE button on the remote control to se!_t the input: signal,
Or, press the SOURCE bu_on _ the front side of the proud.
(_DVI ,(Digital siignal)_ RGS(Anal_ue signal), )
ifthe PC is,in_lle_ intemaBy you can only display the _reen conne_ed to the PC when
sele_i_ the DVI source,
Ins_l 'with the graphic driver.
Make reference to the graphic driver installation guide book,

Use this function when displaying ANALOG RGB inputs of aPC to the other product.
•To use differ_'t pr_ucts connected to each, other
Connect one end of the signal input cab_e(15-pin D-Sub Signal Cable) to the RGB OUT
connector of pr_uct I and connect the other end to the RGB LNPUT connector of other
products
Change SOURCE to Anal_ue signal when desiring to see input signal oi' the Analogue signal,
Product 2: Product 3Product 4

Name of the Bu ons in the Screen Adjustment Unit
Power Button . Pre_s this bL_ to turn on the power Pros his button again to
turn it off (if you p_ess _ Pc_werb_on t_ screen and t_ PC
r_d_ to _m _en will t_ _OFF)
Power Indicator) • This J_icator Hghts up green when the display o_rates normally(on m_e) ffthe display is in sleep (Energy Saving) m_e, this indicator
col_ changes to amber OtVhen turning the p_er OFF the p_er of the
sc_en a_ he PC wH_t_e several sec_ to turn off completely )
.Use this button to she/hide the O,SiD (On Screen Display) menu
screen.
• Use this bu_on to _lect an _on or adiust the s_ inthe OSD screen,
_ _ _ • U_ this butt_ to dilre_ly c_tro_ bright-
ness and contrast of the PC signal
(Digffal signal, Anal_ signal )

Name of the Buttons in the Screen Adjustment Unit
_O/SELECT Buttor_ [F°r Analr°gsigna_]
If the res_ution is 1360X768
if the _s_uti_ is not i_0X768
[For Digital signal]
• The current signaUand m_e info_ation will be disp_aye&
• S_ the inl_ s_ra_
D_ s_g_t and A_ogue s_r_ ¢_'t _ _,_ at _ sa_ time so
w_n tra_e_r_g _ _rce conr_ t_ c_n_or and then turn on the,
_r_
• The unit that receives the signal from the remote control

OSD Menu
Fun_ion Description
Adjusts _reen bnght_ss, contrast and co_r that you prefer.
_URE
Adjusts the _r_n video.
S_REEN

How to adjust the OSD (On Screen Display) screen
+ ÷
+
ir_m--_l -Usethe remote con_l to adjust
4menu_r_j the OSD screen.
Press the MENU Button, then the main menu of the OSD appea_.
oooeooooo, o, uo,°,.e..
r?
How to adju_ the _r_,n automati_lly
You ne_ to adjust _he _re,en display when connecting the prod-
uct to a new c_p_er or cha_i_ t:he mode Refer to the follow,
ing sec_on to _t an optimal product sc_en
Pre_ the AUTO/SELECT b_on (AUTO button in a remote
Contr.) in the PC anal_ signal. Then, an optima_ screen s_tus
wiB be selected that f_s into the current m_e.
If adiustmen'_ is not satisfactory, you need to adjust _reen posio
tion, clock and pha_ in the OSD menu
if the _solution is, 1_0X768
Bthe resolution is not 1_0X768

Adjusting Screen Co,lour
ACC •6500_300W3600K
Selecting a _actory _ir_ co,or _t.
6500K: Slightly reddish white.
9300K: Slightly b}uish whffe..
3600K: Slightly yeH_ish whffe.
• U_r : Se_ec_this op_onto use
t_ _er-_fined _el_tings_
Contrast:
To adju_ the contra_ _ the screen.
To adjuGt the brightr_ss of the s.cr_n_
Red/Grin /Blue
Set your _n col_ levels.

Selecting the options
[_JL = _"'UII[W[W[W[W[W[W[W[W[W[W[W[W[W[W[W[W[W[W[WIIIIIIIIIIIIIIIIIIIIIIIIIIIIII_
input Lfyou press the button once, the foisting
_nput Sign_ Window will ap_ar. Seled
the sigr_ type you want using the T iI,
b_tton.
Child L_k
Power
|adtcato_
Tmns_mnW
U_ the T A buttes to se_ec| On or Off. The _t can be set up _ that _ican only be us_
w_h the remote control This feature can p_vent unautlt-#rized viewing.
in order to lock the OSD _reen adjustment, set the Child Lock tab to the 'On' p_tion.
in order to unlock it, do the foll_ing :
Push the MENU button on the remote contrc4 a_ set Child Lock to the 'Off' p_ition.
To ch_ the lang_ge in which the c_tro_ names are display,ed,
Use this function to set the power indicator on the front side of the product to On or Off.
_fyou set ,Off, it will go off. if you set On at _y tJ_, the power indicator will
automatically be.turned on.
To adjust the transparency of the OSD menu screen,

Selecting the options
• To use this fun_ion
You can c_r_ct the produ_ w_h several other pr_ts and use the T_le m_e func_ion_
Ti_e mode It is used to enlarge the screen ar_ a_so used w_h several
products to vim screen,
Tile mode and c_ose Tile a[_nment _d set the ID
ofthe current productto set bsatien,
Only after pressing the OK button the
adjustme_s ma_ to the settings wiU be saved.
•Posi|ion
The I_atbn of the screen can be adjusted
the Pos_on menu _d _n be set
adiusting the size _ the bezel
If you exit the menu after maki_ t_
changes to the s_ings tff_ adjustmen_
will be saved.
•N Size
Adjust the horizon_ls_e of the screen
taking intoaccount the size oftl_ bezel,.
• V Size
Adjust the vertical size of the _r,e_
taking ir_oaccountthe size oft_ bezel
• Tile recall
Functbn to initi_ize and reteaseTi_
AIiTi_ setting are releasedwhen seleding,
Ti_ fecaland the screen returnstoFull
screen_
•[D
SelecttheIoc_ion_ theTi_ebysettingan_D_

Selecting the options
*,Tile _de
-Timem_ : row ×column ( r =1,2, 3, 4c = 1,2, 3, 4)
-4 x 4available.
°Configuration of _ integration _reen isa_o avaitaNe as we_las conf_uration of ,one _ ®e Display.
-THe mode (product ! ~ 4) : _2) x c(2)
lOW
-Tt|e mode (product I ~ 9) :t(3) x c(3)
tOW
_lumn

Selecting the options
;i
-_le mode (product I ~2) :t(2) x c(1)
tOW
J
SetID You cain a_ign a unique Set ID NO (name
assJgnme_) to,each product: when several prod-
ucts are con_cted for disp,lay, Specify the num-
ber (0_255) using t_ V A button and exit, Use
th_ assig_d Se'__Dto individually control each
produ_ using the Prodf_t _ntrol Pr_ram,
_S;S code ,Co_ vaUues can _ assig_d far all the products
thro_h the communication wP_5RS-232 to set
and _set LOCK.
[To set Access Code]
Use the number b_on and the V &button to
input New _e (ex, 000~255, ex:cept for 251),
Always inputthree digi_ (ex 00!, 010, 1_.)
Save the code value by pressing the OK b_on.
Fo set Lock ]
Press t_ Lock button on the remote cont_l and
t_ select _reen will s_w.
Input the Access Code as _own previously at4
press the OK b,_on and tl-_ OK mes_ge will
show which indicates the Lock funclion.
Press #-_ Lock button on the remote control t_
undo the Lock run.ion
- if y_ input lhe wrong Access Code and press t_ OK, bu#on a me_=ge _ymg '°NG
wifl s_.
-If you set the Acce_ Code after you have set the Lo_ function t_ remo_ _rol w#I
not w_k.
o> Press Lock button to u_o the Lock function.

ARC To select the image size of the screen,
(1:! menu and the Zoom menu are not supported over 1360 X 768 resot_ion)
Auto c,onfig,
Cbck
Phase
Position
Reset
This button is for the automate adius_ent of tf'_ screen position, cl_k and phase.
This functi_ is suitable for a_loge singna_ inp_ only
To minimize any ve_cal bars or stapes visible _ t_ screen ba_grou_. Tl_ _zontaI
screen size will al_ cha_e. This fun_i_ is sui_ble 'to_anabge singna_ inp_ only.
To adjust the focus _ the display, This item al!_s y_ to _move any hodzon_al noise
and dear or sharpen the image of character. This function is suffable _r aneJ_e
singnal irnpJ__ly.
To adjust Ip_ion of t}-_ screen,
This _nction is suitable for analo_ singnal
input only.
Press the _ bu_on to display _e submenu for
positi_
_1 Left Moving the sc_en pos_|ion horiz_taJly.
11_Right
&Up Moving the screen position vedically,
O_n
Use this f_tion to reset the product to _e facto_ defa_R, However, _a_uage selection
wil_ not be initialized

@Is the produ_ cord corm
@_sMe power indicator [igM on?
@Power is on, p_er indicator is green
but Me screen appears extreme{y _tk.
@_sthe _er indicator amber?
@Does the 'Out of range _message
@D_s Me 'Che_ sinai came' mess_e
@Did you check the SOURCE Key?
• See if the power cord is properly _nnected to the
outlet.
, See ffthe power switch is turned on.
° Adjust brightness and _ntrast again.
° if the pro_ct is in power saving m_e, move the
mouse or press any key.
• The signal from the PC (vim card) is oN dthe
verti_ or hoffzon_ frequency range of the prod-
u_ Adju_ the frequency' range by referring to the
Specffi_ions in this manual,
• Maximum resoluti_
R,GB'.1,600X t_ @6_z
DVi : 12_ X !_4 @60Hz
• The sign_ cable between PC and product is not
_nnected. Check the sign_ cable.
•Pr_ the 'SOURCE' menu in the remote C®trol
to ch_ the input signal
° Press the 'SOURCE' menu in the remote C_trol
to ch_ the input sig_.
@ Did you in_ail t_ dr_er? • _e if the plug&play function is supported by
referring to t_ video card _er m_uaL
i •