Lg 16mq70 series User manual

ENGLISH 日本語 DEUTSCH ITALIANO

ENGLISH(UK) 简体中文 NEDERLANDS POLSKI

FRANÇAIS CANADIEN TIẾNG VIỆT FRANÇAIS 

繁體中文 ESPAÑOL PORTUGUÊS

16MQ70

OWNER’S MANUAL

PORTABLE MONITOR

MFL71878902 www.lg.com

ITALIANO DEUTSCH 日本語 ENGLISH

POLSKI NEDERLANDS 简体中文 ENGLISH(UK)

 FRANÇAIS TIẾNG VIỆT FRANÇAIS CANADIEN

PORTUGUÊS ESPAÑOL 繁體中文

MFL71878902

www.lg.com

16MQ70





16MQ70 Series

OWNER’S MANUAL

PORTABLE MONITOR

For safe and convenient use, please read this owner’s manual carefully before starting to use the product.

www.lg.com

ENGLISH

1

ENGLISH

Important Safety Precautions

Important Safety Precautions�� 1

While using product��1

Checking the Components�� 2

Product Tour�� 2

Using Folio Cover�� 3

Connecting Monitor�� 3

Setting Screen (Extension Mode) �� 4

Adjusting Screen Brightness �� 4

Installing SW�� 4

Pre-Tech Support Checklist�� 5

Appendix�� 5

Product Specifications��5

Factory Default Mode��6

Registered Trademark and Open Source Software Notice Information��6

Symbols��6

Important Safety Precautions

Check the following ‘Important Safety Precautions’ to prevent unexpected

danger or damage in advance.

‘Important Safety Precautions’ is divided into ‘Warning’ and ‘Caution.’

!

WARNING: Noncompliance with the instruction may cause serious

physical damage or fatal injuries.

!

CAUTION: Noncompliance with the instruction may cause minor damage

to the body or the machine.

While using product

!WARNING

yUse the product in a safe place where there is no danger

of the product falling.

yDo not use the product in a dusty or humid place.

yDo not use the product in a high or low-temperature

environment.

yDo not touch the power cord with your hands wet.

yKeep the power cable port free of foreign substances.

yClean the product with a proper agent and dry it

completely before using it again.

!

CAUTION

yDo not press the monitor screen with fingers or put

objects on it.

yDo not tap or scratch the screen with a sharp object.

yIf the screen is damaged, do not touch it with your

hands.

yKeeping a paused image on the screen for an extended

period of time may result in screen burn-in.

yUse a screensaver, etc.

yWhen its temperature is low, turning on the monitor may

cause momentary blinking of the screen.

yIf this is the case, you may see some red, green, and blue

spots on the screen but it is normal.

Contents

2Checking the Components

ENGLISH

Checking the Components

The components shown below are provided when you purchase the product.

Check the components before use.

ySome of its components may look different in shape and color from the pictures

in certain models.

yTo clean the product, use a dedicated cleaning agent for PC and monitor.

Using thinners, benzene, alcohol or other similar agents may cause product

damage or deformation.

Monitor body

Owner’s manual USB-C™ cable Folio cover

NOTE

yThe figures in the user’s guide are subject to change without prior notice.

Product Tour

The product may differ in shape and color from the product images included in

this Owner’s manual.

Front

1

2

3



USB-C™ port

USB-C™ port

Screen brightness button

3

ENGLISH

Using Folio Cover

You can fold back the folio cover and use it as a stand.

!

CAUTION

yWhen you are moving the product, make sure to keep the

folio cover on it to protect the screen.

NOTE

yThere are two angles available for using the folio cover.

yThe folio cover can be used in the horizontal mode only.

yThe folio cover is a consumable item and can be damaged during use. You can

purchase folio covers separately from LG Electronics Service Center.

Connecting Monitor

Connect the USB-C™ ports of the monitor and the PC using the USB-C™ cable.

!

CAUTION

yDo not use any other type of cable than USB-C™ cable for

this connection. Doing so can damage the connector.

NOTE

yThis product is designed to be used only with a laptop. The device to be

connected with the monitor must support DisplayPort Alternate Mode (DP Alt

Mode) and power output (USB PD) at 7.5 W (5 V / 1.5 A) or higher.

yThe

USB-C™

port only supports single connection and does not support multiple

connections.

yUse the

USB-C™

cable enclosed with the monitor for connection. If a cable for a

different product is used, it may cause the screen to operate abnormally.

yIf the device connected to the monitor has low battery, connection may be

lost.

yThis monitor supports the plug-and-play function.

(Plug-and-play: When a device is connected to a PC, the PC automatically

recognizes the connected device without any environment settings by the user.)

4Setting Screen (Extension Mode)

ENGLISH

Setting Screen (Extension Mode)

If you set the portable monitor to Extension Mode, you can set the screen

ratio and layout.

1 Press [ / ] or [Ctrl] + [ESC] on your keyboard to bring up the Start menu.

yWindows 10: Press the Start button [ ] and then select the Settings [ ].

yWindows 11: Press the Start button [ ] and then select the Settings [ ]

on

the start screen.

2 When the Settings screen appears, select [System] > [Display].

3 Windows 10: Select [Extend these displays] under [Multiple displays].

Windows 11: Select [Extend these displays].

4 Select monitor 2.

5 Change settings as desired under [Scale & layout].

NOTE

yThe image is only representative and may vary depending on the Windows version

and language of the country.

Adjusting Screen Brightness

You can use the screen brightness button on the right of the monitor to adjust

the screen brightness.





Installing SW

Install OnScreen Control and use various functions such as screen split,

monitor settings, and screen switch easily and conveniently.

1 Visit the LG Electronics website (http://lg.com).

2 Select the “SUPPORT” menu option and search for the product model.

3 Select “OnScreen Control” and start installing the software.

NOTE

yAfter OnScreen Control is installed, you can

see how to use it from the Help menu

provided inside the app.

yOnScreen Control is available for Windows

only.

yThe Auto Screen Rotation function is available

only while OnScreen Control is enabled.

5

ENGLISH

Pre-Tech Support Checklist

If the following symptoms appear while using the product, check again.

It may not be a malfunction.

Symptom Cause and Solution

The screen stays

blank or connection is

unstable.

yCheck if the device connected to the monitor supports

DisplayPort Alternate Mode

(DP Alt Mode) and USB Power Delivery(USB PD).

The power does not

turn on.

yCheck if you can properly connect the device to the

monitor using the

USB-C™

cable that comes with the

monitor.

The monitor’s

supported frequency

range has been

exceeded.

yThis phenomenon occurs when the signal sent from the

PC exceeds the horizontal or vertical frequency range.

Refer to the Factory Mode settings and reset the

frequency.

The screen looks

unclear.

ySetting the screen resolution to any other than the

recommended (optimal) resolution may result in blurry

text or dimming, cropping, or tilting of the screen. Use

the recommended screen resolution setting.

Screen burn-in

remains even when

power is off.

yNote that having a fixed screen on for an extended

period of time may cause damage to the display and

lead to screen burn-in.

yTo use the monitor for a long time, use a screensaver.

There are spots on

the screen.

yYou may see a few pixel spots (red, green, blue, white,

black) on the screen while using the monitor. This is a

normal phenomenon of an LCD screen. This is unrelated

to the monitor performance and is not an abnormality.

Appendix

Product Specications

Display 16 inch (40.6 cm) IPS LCD

Color Depth 16.7 million colors (8 bits)

Resolution

Maximum

Resolution 2560 x 1600 @ 60 Hz

Recommended

Resolution 2560 x 1600 @ 60 Hz

Display Standard

Supported DisplayPort Alternate Mode (DP Alt Mode)

Power

Rated 5 V 02 A

Power

Consumption Operation mode: 8 W general

(factory default)*

Environment

Operation Temperature +32 °F to +104 °F

(0 °C to 40 °C)

Humidity Lower than 80 %

Storage Temperature -4 °F to +140 °F

(-20 °C to 60 °C)

Humidity 85 % or lower

Dimensions

(not including

package)

With a folio cover

14.3 (width) x 9.8 (height) x 0.4 inch

(thickness) /

(362 (width) x 249 (height) x 11.3 mm

(thickness) )

Without a folio

cover

14.2 (width) x 9.7 (height) x 0.3 inch

(thickness) /

(360 (width) x 245.5 (height) x 8.3 mm

(thickness) )

Weight

(not including

package)

With a folio cover Approx. 35 oz (990 g)

Without a folio cover Approx. 24 oz (670 g)

6Appendix

ENGLISH

NOTE

y* Power consumption in On Mode was measured under LGE’s standard testing

conditions (full white pattern, maximum resolution).

yThe product specifications are subject to change without notice for product

improvement.

yPower consumption level may differ depending on the operating conditions and

monitor settings.

Factory Default Mode

Preset Mode Horizontal

frequency (kHz)

Vertical frequency

(Hz) Polarity (H/V)

640 x 480 31.469 59.94 -/-

800 x 600 37.879 60.317 +/+

1024 x 768 48.363 60 -/-

1152 x 864 54.347 60.05 +/+

1280 x 720 45 60 +/+

1280 x 1024 63.981 60.02 +/+

1600 x 900 60 60 +/+

1680 x 1050 65.29 59.954 -/+

1920 x 1080 67.5 60 +/-

1920 x 1080 83.894 74.973 +/-

2560 x 1440 88.79 59.95 +/-

2560 x 1600 48.62 29.96 +/-

2560 x 1600 98.71 59.97 +/-

2560 x 1600 124.26 74.95 +/-

Registered Trademark and Open Source Software Notice

Information

USB Type-C™ and USB-C™ are trademarks of USB Implementers forum.

LG logo is a registered trademark of LG Electronics Inc.

To obtain the source code that is contained in this product, under GPL, LGPL,

MPL, and other open source licenses that have the obligation to disclose

source code, and to access all referred license terms, copyright notices and

other relevant documents please visithttps://opensource.lge.com.

LG Electronics will also provide open source code to you on CD-ROM for a charge

covering the cost of performing such distribution (such as the cost of media,

shipping, and handling) upon email request toopensour[email protected].

This offer is valid to anyone in receipt of this information for a period of three

years after our last shipment of this product.

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

MEMO

16MQ70 Series

OWNER’S MANUAL

PORTABLE MONITOR

For safe and convenient use, please read this owner’s manual carefully before starting to use the product.

www.lg.com

ENGLISH

1

ENGLISH

Important Safety Precautions

Important Safety Precautions�� 1

While using product��1

Checking the Components�� 2

Product Tour�� 2

Using Folio Cover�� 3

Connecting Monitor�� 3

Setting Screen (Extension Mode) �� 4

Adjusting Screen Brightness �� 4

Installing SW�� 4

Pre-Tech Support Checklist�� 5

Appendix�� 5

Product Specifications��5

Factory Default Mode��6

Registered Trademark and Open Source Software Notice Information��6

Symbols��6

Important Safety Precautions

Check the following ‘Important Safety Precautions’ to prevent unexpected

danger or damage in advance.

‘Important Safety Precautions’ is divided into ‘Warning’ and ‘Caution.’

!

WARNING: Noncompliance with the instruction may cause serious

physical damage or fatal injuries.

!

CAUTION: Noncompliance with the instruction may cause minor damage

to the body or the machine.

While using product

!WARNING

yUse the product in a safe place where there is no danger

of the product falling.

yDo not use the product in a dusty or humid place.

yDo not use the product in a high or low-temperature

environment.

yDo not touch the power cord with your hands wet.

yKeep the power cable port free of foreign substances.

yClean the product with a proper agent and dry it

completely before using it again.

!

CAUTION

yDo not press the monitor screen with fingers or put

objects on it.

yDo not tap or scratch the screen with a sharp object.

yIf the screen is damaged, do not touch it with your

hands.

yKeeping a paused image on the screen for an extended

period of time may result in screen burn-in.

yUse a screensaver, etc.

yWhen its temperature is low, turning on the monitor may

cause momentary blinking of the screen.

yIf this is the case, you may see some red, green, and blue

spots on the screen but it is normal.

Contents

2Checking the Components

ENGLISH

Checking the Components

The components shown below are provided when you purchase the product.

Check the components before use.

ySome of its components may look different in shape and color from the pictures

in certain models.

yTo clean the product, use a dedicated cleaning agent for PC and monitor.

Using thinners, benzene, alcohol or other similar agents may cause product

damage or deformation.

Monitor body

Owner’s manual USB-C™ cable Folio cover

NOTE

yThe figures in the user’s guide are subject to change without prior notice.

Product Tour

The product may differ in shape and color from the product images included in

this Owner’s manual.

Front

1

2

3



USB-C™ port

USB-C™ port

Screen brightness button

3

ENGLISH

Using Folio Cover

You can fold back the folio cover and use it as a stand.

!

CAUTION

yWhen you are moving the product, make sure to keep the

folio cover on it to protect the screen.

NOTE

yThere are two angles available for using the folio cover.

yThe folio cover can be used in the horizontal mode only.

yThe folio cover is a consumable item and can be damaged during use. You can

purchase folio covers separately from LG Electronics Service Center.

Connecting Monitor

Connect the USB-C™ ports of the monitor and the PC using the USB-C™ cable.

!

CAUTION

yDo not use any other type of cable than USB-C™ cable for

this connection. Doing so can damage the connector.

NOTE

yThis product is designed to be used only with a laptop. The device to be

connected with the monitor must support DisplayPort Alternate Mode (DP Alt

Mode) and power output (USB PD) at 7.5 W (5 V / 1.5 A) or higher.

yThe

USB-C™

port only supports single connection and does not support multiple

connections.

yUse the

USB-C™

cable enclosed with the monitor for connection. If a cable for a

different product is used, it may cause the screen to operate abnormally.

yIf the device connected to the monitor has low battery, connection may be

lost.

yThis monitor supports the plug-and-play function.

(Plug-and-play: When a device is connected to a PC, the PC automatically

recognizes the connected device without any environment settings by the user.)

4Setting Screen (Extension Mode)

ENGLISH

Setting Screen (Extension Mode)

If you set the portable monitor to Extension Mode, you can set the screen

ratio and layout.

1 Press [ / ] or [Ctrl] + [ESC] on your keyboard to bring up the Start menu.

yWindows 10: Press the Start button [ ] and then select the Settings [ ].

yWindows 11: Press the Start button [ ] and then select the Settings [ ]

on

the start screen.

2 When the Settings screen appears, select [System] > [Display].

3 Windows 10: Select [Extend these displays] under [Multiple displays].

Windows 11: Select [Extend these displays].

4 Select monitor 2.

5 Change settings as desired under [Scale & layout].

NOTE

yThe image is only representative and may vary depending on the Windows version

and language of the country.

Adjusting Screen Brightness

You can use the screen brightness button on the right of the monitor to adjust

the screen brightness.





Installing SW

Install OnScreen Control and use various functions such as screen split,

monitor settings, and screen switch easily and conveniently.

1 Visit the LG Electronics website (http://lg.com/uk).

2 Select the “SUPPORT” menu option and search for the product model.

3 Select “OnScreen Control” and start installing the software.

NOTE

yAfter OnScreen Control is installed, you can

see how to use it from the Help menu

provided inside the app.

yOnScreen Control is available for Windows

only.

yThe Auto Screen Rotation function is available

only while OnScreen Control is enabled.

5

ENGLISH

Pre-Tech Support Checklist

If the following symptoms appear while using the product, check again.

It may not be a malfunction.

Symptom Cause and Solution

The screen stays

blank or connection is

unstable.

yCheck if the device connected to the monitor supports

DisplayPort Alternate Mode

(DP Alt Mode) and USB Power Delivery(USB PD).

The power does not

turn on.

yCheck if you can properly connect the device to the

monitor using the

USB-C™

cable that comes with the

monitor.

The monitor’s

supported frequency

range has been

exceeded.

yThis phenomenon occurs when the signal sent from the

PC exceeds the horizontal or vertical frequency range.

Refer to the Factory Mode settings and reset the

frequency.

The screen looks

unclear.

ySetting the screen resolution to any other than the

recommended (optimal) resolution may result in blurry

text or dimming, cropping, or tilting of the screen. Use

the recommended screen resolution setting.

Screen burn-in

remains even when

power is off.

yNote that having a fixed screen on for an extended

period of time may cause damage to the display and

lead to screen burn-in.

yTo use the monitor for a long time, use a screensaver.

There are spots on

the screen.

yYou may see a few pixel spots (red, green, blue, white,

black) on the screen while using the monitor. This is a

normal phenomenon of an LCD screen. This is unrelated

to the monitor performance and is not an abnormality.

Appendix

Product Specications

Display 40.6 cm IPS LCD

Color Depth 16.7 million colors (8 bits)

Resolution

Maximum

Resolution 2560 x 1600 @ 60 Hz

Recommended

Resolution 2560 x 1600 @ 60 Hz

Display Standard

Supported DisplayPort Alternate Mode (DP Alt Mode)

Power

Rated 5 V 02 A

Power

Consumption

Operation mode: 8 W general (factory

default)*

Environment

Operation Temperature 0 °C to 40 °C

Humidity Lower than 80 %

Storage Temperature -20 °C to 60 °C

Humidity 85 % or lower

Dimensions

(not including

package)

With a folio

cover

362 (width) x 249 (height) x 11.3 mm

(thickness)

Without a folio

cover

360 (width) x 245.5 (height) x 8.3 mm

(thickness)

Weight

(not including

package)

With a folio

cover Approx. 990 g

Without a folio

cover Approx. 670 g