LG M4210D-B21 User manual

Make sure to read the Safety Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask
for service.
M4210D
User’s Guide
Warranty void if removed.
Important
WARRANTY VOID
IF REMOVED
3850TAZ209Y

1
WARNING -This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
To enjoy clearer and more vivid stereoscopic images
See if the resolution is set to Full HD.
The recommended resolution for 3D images is 1920X1080.
If a viewer moves left or right with a distance of more than 4 m, the screen might look dimmed.
Keep a distance of more than 4 m from the product.
4 m
* Falls kein 3D-Video genutzt wird, erscheint der Bildschirm verzerrt.
Installing the 3D Player / To enjoy the 3D video
(To view the applicable Guide, click here.)

2
Using the Remote Control
1 2 3
4 5 6
7 8
0
9
CTR.
PWR
*
There is not a function
which is supported
There is not a function
which is supported
• Menu Button
• Check Button
• Volume Button
• Mute button
Name of the Remote Control Buttons
There is not a function
which is supported
• UP and Down buttons
Bring up and down direction
adjustment.
• ARC button
To select the image size of the
screen.
• Auto Button
Automatic adjustment function
(Operational for the analog signal only)
• Exit Button
There is not a function
which is supported
There is not a function
which is supported
• CTR.PWR Button
Turn on the power of the PC built in the
monitor and then turn off.
(The CTR.PWR function operates only
when the PC Control menu is off.)
• Power On/Off Button
• Input Select Button
(See next page)

3
1 2 3
4 5 6
7 8
0
9
CTR.
PWR
*
If you press the button once,
the following Input Signal
Window will appear. Select
the signal type you want
using the button.
• Input Select Button
Using the Remote Control
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
Inserting batteries into remote control.
RGB
DVI
INPUT
AAA Type

4
Name and Function of the Parts
Rear View
Power Connector : Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports (IN, OUT)
RGB, DVI Ports (IN, OUT)
PC Sound Jack
: Connect the audio cable to the *LINE OUT jack of the PC sound card.
LAN Ports
RGB out Ports
Head Phone out Port
Optical Sound out Ports
USB Ports
Serlal Ports
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that
the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of
PC sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using
the card jumper of the program (Refer to the Sound Card Manual).
* The product image in the user’s guide could be different from the actual image.
OUT
IN
RGB IN
RGB OUT
DVIIN
REMOTE
CONTROL IN
RS-232C
(CONTROL&
SERVICE)
AUDIO
(RGB/DVI)
LAN RGB OUT SERLAL
PORT
USBH/PHONE
OUT
SP/DIF
OUT
IN
RGB IN
RGB OUT
DVI IN
REMOTE
CONTROL IN
RS-232C
(CONTROL&
SERVICE)
AUDIO
(RGB/DVI)
LAN RGB OUT SERLAL
PORT
USBH/PHONE
OUT
SP/DIF

5
Connecting to External Devices
When Connecting to your Built in PC
OUT
IN
RGB IN
RGB OUT
DVI IN
REMOTE
CONTROL IN
RS-232C
(CONTROL&
SERVICE)
AUDIO
(RGB/DVI)
LAN RGB OUT SERLAL
PORT
USBH/PHONE
OUT
SP/DIF
Rear side of the product.
Connect the power cord.
1.
5
When connecting with the DVI signal input cable.
Turn on power by pressing the power button on the product.
ON/OFF
AUTO/SET
SOURCE
Power button
•Select DVI : DVI Digital signal.
Install the driver files contained at the supplied CD.
2.
3.
4.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button at the back side of the product.
RGB
DVI
INPUT
INPUT SET
SOURCE AUTO/SET

6
Connecting to External Devices
2.
Turn on power by pressing the power button on the product.
ON/OFF
AUTO/SET
SOURCE
Power button
3.
When connecting with the D-Sub signal input cable.
OUT
IN
RGB IN
RGB OUT
DVI IN
REMOTE
CONTROL IN
RS-232C
(CONTROL&
SERVICE)
AUDIO
(RGB/DVI)
LAN RGB OUT SERLAL
PORT
USBH/PHONE
OUT
SP/DIF
RGB IN
RGB OUT
Rear side of the product.
Connect the power cord.
Install the Video driver file contained at the supplied CD.
1.

7
Connecting to External Devices
1
2
Move the mouse pointer to an
empty area on the Windows
screen (with no icons or task
bars) and click the right
mouse button.
1
2
When the pop-up menu
appears, click the
'Properties' menu.
4.
1
Select 'Settings' tab.
2Click
' Advanced ' button.
5.

8
Connecting to External Devices
6.
Select
'CATALYST(R)Control
Center' tab.
Click 'ATI
CATALYST(R)Control
Center
' button.
1
2
1
2
Select 'Display
Manager'menu.
Select 'Detect
Displays'button.
7.

9
Connecting to External Devices
•Select RGB : 15-pin D-Sub analog signal.
10.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button at the back side of the product.
RGB
DVI
INPUT
INPUT SET
SOURCE AUTO/SET
• How to connect to two computers.
Connect the signal cables (DVI and D-Sub) to each computer.
Press the INPUT button in a remote control to select the computer to use.
• Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
Note
1
2
8.
9.
Select gray monitor icon and then press the right button of the mouse.
1
2
Select 'Clone Main with monitor' menu.
Click 'Yes' button.