LG ND5430 User manual

OWNER’S MANUAL
Music in Style
Wireless Speaker With
Dual Dock
ND5430
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL ITALIANO
PORTUGUÊS
NEDERLANDS
ΕΛΛΗΝΙΚΑ
SLOVENŠČINA

1 Getting Started
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
NOTICE: For safety marking information including
product identication and supply ratings, please
refer to the main label on the bottom of the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
Getting Started2
Getting Started
1

Getting Started 3
Getting Started
1
CAUTION:
yThe apparatus shall not be exposed to water
(dripping or splashing) and no objects lled with
liquids, such as vases, shall be placed on the
apparatus.
yNo naked ame sources, such as lighted candles,
should be placed on the apparatus.
yOnly use the AC adaptor supplied with this
device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage
to the device and void your warranty.
yTo avoid re or electric shock, do not open the
unit. contact to qualied personnel only.
yDo not leave the unit in a place near the heating
appliances or subject to direct sunlight, moisture,
or mechanical shock.
yDo not leave the unit on an unstable place such
as high shelves. It may fall down because of the
vibration of the sound.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.

Getting Started4
Getting Started
1
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Please contact to the followingaddress for
obtaining a copy of the DoC (Declaration of
Conformity).
Contact oce for compliance of this product:
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
yPlease note that this is NOT a Customer Service
contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.
In door use only.
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.

Table of Contents 5
1
2
3
4
Table of Contents
1 Getting Started
2 Safety Information
6 Main Features
6 Accessories
6 Introduction
7 Remote Control
8 Front Panel
9 Back Panel
9 Top Panel
10 Connecting the AC Adapter
10 About Ferrite Core (Optional)
2 Operating
11 Basic Operations
11 – iPod/iPhone/iPad Operation
12 – Compatible iPod/iPhone/iPad
13 – Android device Operation
14 – Listening to Music from Your External
Device
15 Using a Bluetooth Wireless Technology
15 – Listening to Music of a Bluetooth
Device
17 – Using Bluetooth App
19 Other Operations
19 – LG Tag On
19 – Setting BASS (BASS BLAST) sound
effect
19 – Turning Off the Sound Temporarily
19 – Auto Power Down
3 Troubleshooting
20 Troubleshooting
4 Appendix
21 About LED condition
22 Trademarks and Licenses
22 Handling the Unit
23 Specifications

Getting Started6
Getting Started
1
Main Features
Made for iPod/iPhone/iPad or
Android device
Enjoys music from iPod/iPhone/iPad or Android
device with simple connection.
Portable In
Listens to music from your portable device.
LG Bluetooth Remote
You can control this unit with your iPod touch/
iPhone/iPad or Android device via Bluetooth. This
unit and your device must be paired for Bluetooth.
Visit “Apple App Store” or “Google Android Market
(Google Play Store)”or use the QR code shown
below to search for “LG Bluetooth Remote” app. For
detailed information, refer to page 17-18.
(Apple iOS) (Android OS)
Accessories
Please check and identify the supplied accessories.
Remote control (1) Battery (1)
AC adapter (1) Power cord (1)
Stand for iPod/iPhone/
iPad (1)
Rubber pad (1)
Introduction
Symbol Used in This Manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.

Getting Started 7
Getting Started
1
Remote Control
1(Power): Switches the unit ON or OFF.
PFUNCTION : Selects the function and input
source.
+/- (Volume) : Adjusts volume of speaker.
BASS EQ : Reinforce BASS (BASS BLAST) sound
effect.
Y/U(Skip/Search) :
- Skips fast Backward or Forward.
- Searches for a section within a le.
(Play/Pause) : Starts or pause playback
@: Mutes the sound.
?:The button is not available for any function.
The battery used in this device may present a
re or chemical burn hazard if mistreated. Do
not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of re or explosion. Dispose of
used battery. Keep battery away from children.
Do not disassemble or dispose of in re.
> Caution
Battery Installation
You have two ways to open the battery cover.
1. Turn the battery cover counterclockwise by
using a coin or your finger. Then take the battery
cover.
2. Insert and fix the battery with the plus (+)
facing in the same direction as the plus (+) on
the battery cover.
3. Put the battery cover on the remote control and
turn it clockwise to close.
If you have long nails, do not open the battery
cover by using your nger. Or else, your nail
would be broken.
> Caution
Coin Finger
Coin Finger

Getting Started8
Getting Started
1
Front Panel
a Remote Sensor
b Display window
Displays each of functions.
c 1: Switches the unit ON or OFF.
d Speaker
e F: Selects the function and input source.
+/- (Volume) : Adjusts speaker volume.
Precautions in using the touch buttons
yUse the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before using.
yDo not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
yTouch the button that you want to work in
order to operate the function correctly.
yBe careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
> Caution

Getting Started 9
Getting Started
1
Back Panel
aPORT.IN (3.5 mm)
Listens to music from your portable device.
bDC IN (AC adapter input)
Connects the supplied AC adapter.
cUSB Port
- Plays music le by using your USB cable for
iPod/iPhone/iPad.
- Charges your portable device.
aiPod/iPhone/iPad Dock (Lightning Connector)
Connects your iPod/iPhone/iPad.
b Android device Dock (Micro USB)
Connects your Android device.
cTag on
LG Tag On allows you to install and open “LG
Bluetooth Remote” app to NFC-enabled phone.
Top Panel

Getting Started10
Getting Started
1
Connecting the AC
Adapter
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet. Then
the unit goes into standby mode.
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
> Caution
About Ferrite Core
(Optional)
This ferrite core can reduce noises.
How to attach the ferrite core
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the portable cable and USB cable on the
ferrite core.
3. Close the ferrite core until it clicks.

2 Operating
Operating 11
Operating
2
Basic Operations
iPod/iPhone/iPad Operation
You can enjoy the sound from your iPod/iPhone/
iPad through this unit. For details about iPod/
iPhone/iPad, refer to the iPod/iPhone/iPad User
Guide.
yYou are recommended to remove the case
for your iPod/iPhone/iPad before you place
your iPod/iPhone/iPad into the dock.
yInstall the supplied stand for iPod/iPhone/
iPad to keep iPod/iPhone/iPad stable before
you place the iPod/iPhone/iPad.
, Note
Connecting an iPod/iPhone/iPad
(Lightning connector) to Dock
1. Connect your iPod/iPhone/iPad (Lightning
connector) to Dock firmly.
When this unit is connected to power, your
iPod/iPhone/iPad is automatically turned on
and starts recharging even in standby mode.
2. Press
PFUNCTION or F to select iPod
function.
Connecting an iPod/iPhone/iPad
(30-Pin/Lightning connector) to
USB port
1. Connect your iPod/iPhone/iPad (30-pin/
Lightning connector) to USB port using the
appropriate cable.
When this unit is connected to power, your
iPod/iPhone/iPad is automatically turned on
and starts recharging even in standby mode.
2. Press
PFUNCTION or Fto select (USB)
function.

Operating12
Operating
2
To Do this
Play Press .
Pause During playback, Press .
Skip
During playback, press Y/
Uto go to the next le or to
return to the beginning of the
current le.
Playing less than 2 seconds,
press Yto go to the previous
le.
Playing after 3 seconds, press
Yto go to the beginning of
the le.
Search
Press and hold Y/U
during playback and release it at
the point you want to listen to.
Compatible iPod/iPhone/iPad
The unit supports the models as follows ;
yiPod touch 3G, 4G, 5G
yiPod nano 4G, 5G, 6G, 7G
yiPhone 5
yiPhone 4S
yiPhone 4
yiPhone 3GS
yiPad mini
yiPad 2G, 3G, 4G
yiPad
yWhen you disconnect your iPod/iPhone/
iPad during playback, the playback pauses.
yWhen your iPod/iPhone/iPad is docked, you
cannot control the volume button of your
iPod/iPhone/iPad.
yIf the connection has an error, check these
problems as follows;
-Your iPod/iPhone/iPad is not connected
rmly.
-This unit recognizes your iPod/iPhone/iPad
as an unknown device.
-Your iPod/iPhone/iPad is exceptionally low
in power.
/The battery needs to be charged.
/If you charge the battery while iPod/
iPhone/iPad is extremely low in power, it
may take longer to be charged.
yYou may not control your iPod/iPhone/iPad
from this unit due to malfunction of iPod/
iPhone/iPad.
yDepending on your iPod/iPhone/iPad’s
software version, it may not be possible to
control your iPod/iPhone/iPad from this
unit. We recommend installing the latest
software version.
yIf you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch/iPhone/iPad, disconnect it from
iPod/iPhone/iPad dock of this unit and then
use it.
yIf you have a problem with your iPod/
iPhone/iPad, please visit www.apple.com/
support.
yiPod touch, iPhone and iPad have any
dierence in operation other than iPod.
You may need any additional control to use
them with this unit. (e.g.“slide to unlock”)
yDo not connect two iPad for charge at the
same time.
, Note

Operating 13
Operating
2
Android device Operation
You can enjoy the sound from your LG Android
device through the dock for Android device of this
unit. For details about Android device, refer to the
Android device User Guide.
To stream audio from your Android device through
this unit, you need :
yWith Android operation system : Ver 4.1 (or later)
yWith a micro USB connector
With Android operation system (Version 4.0 or
below), this unit can only charge it and you can
enjoy audio through Bluetooth.
yThis unit may not compatible with the
device that does not support the *AOA
(Android Open Accessory) 2.0 version.
It is possible that certain devices may not
support or be compliant with the AOA2.0
USB audio standard, resulting in the device
freezing or rebooting after being connected
and detached from the speaker system.
If you experience this problem, please
contact your device manufacturer. Your
device may need to be updated with the
latest Jellybean software and or the correct
AOA2.0 USB audio standard.
*About AOA (Android Open Accessory) 2.0
version ;
Audio output from Android device to
the Accessory and HID (Human Interface
Device)
yYou are recommended to remove the case
for your Android device before you connect
your Android device into the dock.
, Note
1. Check the orientation of the micro USB
connector on your Android phone.
2. Connect your Android device firmly.
If the size of your Android device is big or the
screen of your Android device does not face
you, insert the supplied rubber pad to keep
your Android device stable before you place
your Android device, as illustrated.
, Note
3. Press
PFUNCTION or Fto select
(ANDROID) function.
To Do this
Play Press .
Pause During playback, Press .
Skip
During playback, press Y/
Uto go to the next le or to
return to the beginning of the
current le.
Playing less than 2 seconds,
press Yto go to the previous
le.
Playing after 3 seconds, press
Yto go to the beginning of
the le.

Operating14
Operating
2
yIf the connection has an error, check these
problems as follows;
-Your Android device is not connected rmly.
-This unit recognizes your Android device as
an unknown device.
-Your Android device is not booted.
-Check the setting of USB connection type
on your Android device.
yWhen you disconnect your Android device
from the dock during playback, the playback
may continue.
yIn case of no sound from this unit, adjust
the volume of your Android device.
yThe charging time may vary depending on
your Android device.
ySome Android devices may not be charged.
yDepending on the position and orientation
of the micro USB connector on your Android
device, connect it in portrait or landscape
position.
yYou may not control your Android device
from this unit due to malfunction of Android
device.
yDepending on your Android device’s
software version, it may not be possible
to control your Android device from this
unit. We recommend installing the latest
software version.
yIf you use an application, make a call, or
send and receive SMS text message, etc. on
Android device, disconnect it from Android
device dock of this unit and then use it.
yIf your Android device does not support
AOA (Android Open Accessory) 2.0 version,
this unit can only charge your Android
device even though Android device has OS
4.1 (or later).
, Note Listening to Music from Your
External Device
The unit can be used to play the music from many
types of external device. (Portable cable is not
supplied as an accessory with this unit.)
MP3 or PMP etc
1. Connect the external device to the PORT.IN
connector of the unit.
2. Turn the power on by pressing 1.
3. Select the (PORTABLE) function by pressing
PFUNCTION or F.
4. Turn the external device on and start playing it.

Operating 15
Operating
2
Using a Bluetooth
Wireless Technology
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.)
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth Profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
Listening to Music of a
Bluetooth Device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the
PFUNCTION or F.
Bluetooth LED ( ) blinks.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as“LG Docking
(XX:XX)”.
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG Docking
(F7:08)” on your Bluetooth device.
, Note
3. Enter the PIN code.
PIN code : 0000
Depending on the Bluetooth device type,
some devices do not require a PIN code.
, Note
4. When this unit successfully is connected with
your Bluetooth device, Bluetooth LED ( ) stop
blinking.
yDepending on the Bluetooth device type,
some devices have a dierent pairing way.
yTry pairing procedure if your device name is
not in the device list.
, Note
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
According to your Bluetooth device’s volume
level, the volume level of Bluetooth will be
adjusted.

Operating16
Operating
2
ySound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
yWhen you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
yAfter your device is connected to the unit
via Bluetooth, the function switches to BT
automatically.
yAfter searching for this unit on your
Bluetooth device, connect the Bluetooth
device to this unit. Then play music you
want.
yThe sound may be interrupted when
the connection interfered by the other
electronic wave.
yYou cannot control the Bluetooth device
with this unit.
yPairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yAlthough the distance between your
Bluetooth and the set is less than 10 m,
there are obstacles between both, your
Bluetooth device cannot be connected.
yDepending on the type of the device,
you may not be able to use the Bluetooth
function.
yYou can enjoy wireless system using phone,
MP3, Notebook, etc.
yWhen not connected the Bluetooth,
Bluetooth LED ( ) blinks.
yThe electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yWhen someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
, Note
yIf the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower. The connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
yThe device with Bluetooth® wireless
technology is disconnected, if you turn o
the main unit or put the device away from
the main unit more than 10 m.
yIf the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
, Note

Operating 17
Operating
2
Using Bluetooth App
About “LG Bluetooth Remote” App
“LG Bluetooth Remote”app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free“LG Bluetooth Remote”
app.
Install “LG Bluetooth Remote”
App through “Apple App Store” or
“Google Android Market (Google
Play Store)”
1. Tap the “Apple App Store” icon or “Google
Android Market (Google Play Store)”icon.
2. In the search bar, type in the “LG Bluetooth
Remote”and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
yMake sure that your Bluetooth device is
connected to the Internet.
yMake sure that your Bluetooth device is
equipped with “Apple App Store” or “Google
Android Market (Google Play Store)”.
yIf you want to get more information, refer to
explanation of BT app in “Apple App Store” or
“Google Android Market (Google Play Store)”.
, Note
Install “LG Bluetooth Remote App”
by using QR code
1. Install “LG Bluetooth Remote” app through QR
code. Use the scanning software to scan the QR
code.
(Apple iOS) (Android OS)
2. Tap an icon for installation.
3. Tap an icon for downloading.
yMake sure that your Bluetooth device is
connected to the Internet.
yMake sure that your Bluetooth device has a
scanning software application. If you don’t
have one, download one from “Apple App
Store” or “Google Android Market (Google
Play Store)”.
, Note

Operating18
Operating
2
Activate Bluetooth with “LG
Bluetooth Remote” App
“LG Bluetooth Remote”app helps to connect your
bluetooth device to this unit.
In case of iOS device ;
After performing the pairing operation,
activate Bluetooth with LG Bluetooth Remote
App.
, Note
1. Tap “LG Bluetooth Remote”app icon on the
home screen to open“LG Bluetooth Remote”
app, and go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
yBT app will be available in the software
version as follow;
-iOS O/S : Ver 4.3 (or later)
-Android O/S : Ver 2.3.3 (or later)
yIf you place your iPod touch/iPhone/iPad
into the dock of this unit while your iPod
touch/iPhone/iPad is connected to this
unit by Bluetooth connection, and you
switch this unit to iPod mode, the Bluetooth
connection is deactivated.
yIf you place your Android device into the
dock of this unit while your Android device
is connected to this unit by Bluetooth
connection, and you switch this unit to
ANDROID mode, the Bluetooth connection
is deactivated.
yThis unit does not support the multi-pairing.
If this unit is already connected with other
Bluetooth device, disconnect that device
and then try again.
yIf you use “LG Bluetooth Remote” app for
operation, there would be some dierences
between “LG Bluetooth Remote”app and
the supplied remote control. Use the
supplied remote control as necessary.
yDepending on the Bluetooth device, “LG
Bluetooth Remote” app may not work.
y“LG Bluetooth Remote”app for Apple iOS is
slightly dierent from that of Android OS.
yThe connection you’ve made may be
disconnected if you select other application
or change the setting of the connected
device via “LG Bluetooth Remote”app. In
such a case, please check the connection
status.
yTo prevent a malfunction, you are
recommended to connect only one device
to this unit.
yDon’t connect your smart device by using
a cable to USB port. Or else the Bluetooth
connection will be disconnected.
yAfter connection of BT app, music may be
output from your device. In this case, try
connecting procedure again.
, Note

Operating 19
Operating
2
Other Operations
LG Tag On
LG Tag On allows you to install and open “LG
Bluetooth Remote” app to NFC-enabled phone.
1. Activates the NFC feature of your NFC-enabled
phone.
2. Turn on the unit.
3. Tag the back of your NFC-enabled phone over
the unit.
-If “LG Bluetooth Remote” app is not installed on
your NFC-enabled phone, the linked screen with
“LG Bluetooth Remote“ app is displayed.
-If “LG Bluetooth Remote” app is installed on your
NFC-enabled phone, “LG Bluetooth Remote” app
is activated.
yYou must activate the NFC feature of your
NFC-enabled phone.
yIf your NFC-enabled phone’s screen is
locked, it will not read the NFC.
yIf your smart phone case is plated with
chrome, NFC is unavailable. Depending on
your case’s material or thickness, NFC may
not be read well.
, Note
Setting BASS (BASS BLAST)
sound effect
You can listen to music by setting BASS (BASS
BLAST) sound eect. Press BASS EQ repeatedly.
Then you can reinforce BASS (BASS BLAST) sound
eect.
BASS (BASS BLAST) <-> BYPASS
Turning Off the Sound
Temporarily
Press @to mute the sound. You can mute
the sound in order, for example, to answer
the telephone. To cancel mute function, press
@again or adjust volume level by pressing
+/-(Volume).
Auto Power Down
This unit will power itself down to save electronic
consumption in case main unit is not connected to
external device and is not used for 25 minutes.
Also this unit will power down if no input is
connected using the analogue input after six hours.

3 Troubleshooting
Troubleshooting20
3
Troubleshooting
Troubleshooting
Problem Cause & Correction
No Power.
yPlug in the power cord.
yCheck the condition by operating other electronic devices.
No sound.
yPress PFUNCTION or Fand check the selected function.
yAdjust the volume of your portable device.
yCheck that the sound of the unit is muted.
iPod/iPhone/iPad does
not work.
yConnect iPod/iPhone/iPad to the unit correctly.
Audio is not output
from your docked
Android device.
yMake sure that you are using Android system of version 4.1 or later.
yConnect Android device to the unit correctly.
The remote control
does not work properly.
yThe remote control is not pointed at the remote sensor of the unit.
yThe remote control is too far from the unit.
yThere is an obstacle in the path of the remote control and the unit.
yThe battery in the remote control is exhausted.
Bluetooth pairing does
not work well.
ySwitch Bluetooth o and on again on your Bluetooth device, then try pairing
again.
yBe sure your Bluetooth device is on.
yRemove the obstacle in the path of the Bluetooth device and the unit.
yDepending on the type of the Bluetooth device or surrounding
environment, your device may not be paired with the unit.
yWhen your Bluetooth device have been already connected with other unit,
disconnect the Bluetooth connection rst. Then you can control your unit
through BT app.
yDepending on the Bluetooth device, BT app may work restrictively not work.
yThe connection you’ve made may be disconnected if you select other
application or change the setting of the connected device via BT app. In
such case, please check the connection status.